zxAnMldAging
ZTE-AN-MLD-MIB ·
.1.3.6.1.4.1.3902.1015.29.1.1.1.2
Object
scalar
r/w
seconds Integer32
The timeout period in seconds for aging out Multicast Groups dynamically learned with mld. Note that aging operates on a per interface per VLAN per multicast group basis. The value is 0 means that no mld aging.
Context
- MIB
- ZTE-AN-MLD-MIB
- OID
.1.3.6.1.4.1.3902.1015.29.1.1.1.2- Type
- scalar
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- zxAnMldGlobal
- Siblings
- 23
Syntax
seconds Integer32
Values & Constraints
Object Constraints
range: 30-3600
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxAnMldAdminStatus The administrative status of global mld service. | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.29.1.1.1.1 |
| zxAnMldQueryInterval MLD proxy general query interval. | scalar | Integer32 | .1.3.6.1.4.1.3902.1015.29.1.1.1.10 |
| zxAnMldQueryMaxResponseTime MLD proxy query max response time. | scalar | 0.1second Integer32 | .1.3.6.1.4.1.3902.1015.29.1.1.1.11 |
| zxAnMldLastMembQueryInterval MLD proxy last member query interval. | scalar | 0.1second Integer32 | .1.3.6.1.4.1.3902.1015.29.1.1.1.12 |
| zxAnMldLastMembQueryCount MLD proxy last member query count. | scalar | Integer32 | .1.3.6.1.4.1.3902.1015.29.1.1.1.13 |
| zxAnMldUnsolicitedReportInterval MLD proxy unsolicited report interval. | scalar | seconds Integer32 | .1.3.6.1.4.1.3902.1015.29.1.1.1.14 |
| zxAnMldNetworkSideHostIp The host ip when working on proxy mode. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.3902.1015.29.1.1.1.15 |
| zxAnMldForwCvlanOnOff MLD cvlan status. | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.29.1.1.1.16 |
| zxAnMldHostTrackOnOff Mld host tracking status. | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.29.1.1.1.17 |
| zxAnMldNonMatchGroup Mld non match group status. | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.29.1.1.1.18 |
| zxAnMldGeneralLeaveGrpAddr The IP of general leave group addr. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.3902.1015.29.1.1.1.19 |
| zxAnMldLogOnOff Mld log status. | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.29.1.1.1.20 |
| zxAnMldGroupThreshold Max group threshold | scalar | Integer32 | .1.3.6.1.4.1.3902.1015.29.1.1.1.21 |
| zxAnMldMulticastServiceModel This object indicates the IP multicast service model,
its values are as follow:
asm(1) --- ASM(Any-Source Multicast),defined in RFC 1112;
ssm(2) --- SSM(Source-Specific Multicast)… | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.29.1.1.1.22 |
| zxAnMldV1AdminStatus The administrative status of MLDv1 packet. | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.29.1.1.1.23 |
| zxAnMldV2AdminStatus The administrative status of MLDv2 packet. | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.29.1.1.1.24 |
| zxAnMldWorkingMode deprecated Mld working mode, mld entity can work as a proxy,routing
or snooping. | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.29.1.1.1.3 |
| zxAnMldMcastInAllVlan enable(1): multicast forward data in all vlans.
disable(2): multicast play role in their vlans only | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.29.1.1.1.4 |
| zxAnMldDefaultMvlan Default multicast vlan ID.
It is used to auto config (add or delete) multicast group to this
default Mvlan.That is if this varible is set then all the operation
( add or delete) a… | scalar | Integer32 | .1.3.6.1.4.1.3902.1015.29.1.1.1.5 |
| zxAnMldAutoConfigGrpToDefaultMvlan Enable/disable auto add or delete grp to default mvlan.If it is
enable(1),zxAnMldDefaultMvlan must be set a non zero value at first. | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.29.1.1.1.6 |
| zxAnMldUserSideRoutingIp The routing ip for user side when the device is looked as a mld router. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.3902.1015.29.1.1.1.7 |
| zxAnMldBandwidthCtrl Adminstrative status of bandwidth traffic control for multicast
service. | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.29.1.1.1.8 |
| zxAnMldRobustnessVariable MLD proxy robustness variable. | scalar | Integer32 | .1.3.6.1.4.1.3902.1015.29.1.1.1.9 |