zxAnImaGroupOperstatus

ZTE-AN-IMA-MIB · .1.3.6.1.4.1.3902.1015.1005.1.1.1.13
MIB view Table view

Object

column Enumeration 
Operational status of IMA group.

Context

MIB
ZTE-AN-IMA-MIB
OID
.1.3.6.1.4.1.3902.1015.1005.1.1.1.13
Type
column
Access
readonly
Status
current
Parent
zxAnImaGroupEntry
Table
zxAnImaGroupTable
Siblings
21

Syntax

Enumeration

Values & Constraints

Enumerated Values
1up
2down

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
zxAnImaShelf
Shelf of IMA card.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3902.1015.1005.1.1.1.1
zxAnImaGroupTxFrameLength
The frame length to be used by the IMA group in the transmit direction.
columnImaFrameLength.1.3.6.1.4.1.3902.1015.1005.1.1.1.10
zxAnImaGroupRxFrameLength
The frame length to be used by the IMA group in the recieving direction.
columnImaFrameLength.1.3.6.1.4.1.3902.1015.1005.1.1.1.11
zxAnImaGroupAdminStatus
Administrative status of IMA group. When it is set to reset(3),the agent should reset this IMA group and then set it to its previous status.
columnEnumeration.1.3.6.1.4.1.3902.1015.1005.1.1.1.12
zxAnImaGroupNeState
The current operational state of the near-end IMA Group.
columnImaGroupState.1.3.6.1.4.1.3902.1015.1005.1.1.1.14
zxAnImaGroupFeState
The current operational state of the far-end IMA Group.
columnImaGroupState.1.3.6.1.4.1.3902.1015.1005.1.1.1.15
zxAnImaGroupDsx1LineType
This variable indicates the variety of E1 Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reasonably carry, as well …
columnEnumeration.1.3.6.1.4.1.3902.1015.1005.1.1.1.16
zxAnImaGroupDsx1LineCoding
This variable describes the variety of Zero Code suppression used on this link, which in turn affects a number of its characteristics. ami(4) refers to a mode wherein no zero code…
columnEnumeration.1.3.6.1.4.1.3902.1015.1005.1.1.1.17
zxAnImaGroupDsx1TxClockSource
The source of the transmit clock. loopTiming(1) indicated that the recovered receive clock is used as the transmit clock. localTiming(2) indicates that a local source clock is use…
columnEnumeration.1.3.6.1.4.1.3902.1015.1005.1.1.1.18
zxAnImaGroupDsx1IdleCells
This variable indicates the types of cells that should be sent in case there is no real data to send. According to the ATM Forum, Unassigned cells should be sent (octet 1-3 are 0'…
columnEnumeration.1.3.6.1.4.1.3902.1015.1005.1.1.1.19
zxAnImaSlot
Slot of IMA card.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3902.1015.1005.1.1.1.2
zxAnImaGroupDsx1RxScrambling
This variable indicates whether the information is being descrambled on receiving. It should be set the same as the transmitting side.
columnEnumeration.1.3.6.1.4.1.3902.1015.1005.1.1.1.20
zxAnImaGroupDsx1TxScrambling
This variable indicates whether the information (48 octet payload) is being scrambled before transmitting. It should be set the same as the receiving side.
columnEnumeration.1.3.6.1.4.1.3902.1015.1005.1.1.1.21
zxAnImaGroupRowStatus
This object is used to create, delete the ima group interface in this table.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.3902.1015.1005.1.1.1.22
zxAnImaGroupIndex
IMA Group Index in this IMA card.
columnInteger32.1.3.6.1.4.1.3902.1015.1005.1.1.1.3
zxAnImaGroupConfImaVersion
The configured version of Group,ima 1.0 or ima 1.1 .
columnEnumeration.1.3.6.1.4.1.3902.1015.1005.1.1.1.4
zxAnImaGroupActualImaVersion
The actual version of Group,ima 1.0 or ima 1.1 .
columnEnumeration.1.3.6.1.4.1.3902.1015.1005.1.1.1.5
zxAnImaGroupSymmetry
Symmetry of the IMA group.
columnImaGroupSymmetry.1.3.6.1.4.1.3902.1015.1005.1.1.1.6
zxAnImaGroupM2SClkMode
The clock mode of master to slave for the Group
columnEnumeration.1.3.6.1.4.1.3902.1015.1005.1.1.1.7
zxAnImaGroupNeTxClkMode
Transmit clocking mode used by the near-end IMA group.
columnImaGroupTxClkMode.1.3.6.1.4.1.3902.1015.1005.1.1.1.8
zxAnImaGroupFeTxClkMode
Transmit clocking mode used by the far-end IMA group.
columnImaGroupTxClkMode.1.3.6.1.4.1.3902.1015.1005.1.1.1.9