zxAnEnvFanMgmt
ZTE-AN-EQUIP-MIB ·
.1.3.6.1.4.1.3902.1015.2.1.3.10
Object
node
No description available.
Context
- MIB
- ZTE-AN-EQUIP-MIB
- OID
.1.3.6.1.4.1.3902.1015.2.1.3.10- Type
- node
- Parent
- zxAnEnvMonitor
- Siblings
- 15
- Children
- 6
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxAnEnvMgmtCapabilities The enviroment management capabilities of this equipment.
The bit value 1 means the function represented by this bit is supported
by this equipment.
NOTE:
No recoman… | scalar | Bits | .1.3.6.1.4.1.3902.1015.2.1.3.1 |
| zxAnEnvDustCapMgmt | node | - | .1.3.6.1.4.1.3902.1015.2.1.3.11 |
| zxAnEnvMonitorIfTrapEnable For F820, enable or disable the EPM link up/down trap. | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.2.1.3.12 |
| zxAnEnvCardMgmt | node | - | .1.3.6.1.4.1.3902.1015.2.1.3.13 |
| zxAnEnvOverheatProtectionMgmt | node | - | .1.3.6.1.4.1.3902.1015.2.1.3.14 |
| zxAnEnvBatteryObjects | node | - | .1.3.6.1.4.1.3902.1015.2.1.3.15 |
| zxAnEnvDeviceObjects | node | - | .1.3.6.1.4.1.3902.1015.2.1.3.16 |
| zxAnEnvTemperature The temperature of the enviroment. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.2.1.3.2 |
| zxAnEnvTemperatureAlarmThreshold The temperature alarm threshold of the enviroment. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.2.1.3.3 |
| zxAnEnvMonitorInterfaceUsage The equipment type connected to the enviroment monitor interface.
NOTE:
No recomanded to display it in NMS. | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.2.1.3.4 |
| zxAnMPTemperature The temperature of the MP. Unit is C | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.2.1.3.5 |
| zxAnMPTemperatureAlarmThreshold The temperature alarm threshold of the MP. Unit is C | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.2.1.3.6 |
| zxAnEpmConnectPort The port no which epm connect | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.2.1.3.7 |
| zxAnEnvBackplaneInterfaceUsage The equipment type connected to the Backplane Interface.
fan(1): the fan connect to the Backplane Interface;
noUse(3): not used;
noSupport(255):not support. | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.2.1.3.8 |
| zxAnEnvPowerSupplyMgmt | node | - | .1.3.6.1.4.1.3902.1015.2.1.3.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxAnEnvFanAlarmBeepEnable The control status of the fan alarm beep. | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.2.1.3.10.1 |
| zxAnEnvFanSpeedCtrlMgmt | node | - | .1.3.6.1.4.1.3902.1015.2.1.3.10.10 |
| zxAnEnvFanAutoSwitchByCardInst Enable/disable fan auto switch with card installation.
If it is enabled,the fan under the card should be swiched to running
status when the card is installed.Otherwise,the fan sho… | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.2.1.3.10.2 |
| zxAnEnvFanTrayHardwareVersion The hardware version of the fan tray | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3902.1015.2.1.3.10.3 |
| zxAnEnvFanTraySoftwareVersion The software version of the fan tray | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3902.1015.2.1.3.10.4 |
| zxAnEnvFanInvSn The serial number of fan board.It used by inventory management. | scalar | OctetString | .1.3.6.1.4.1.3902.1015.2.1.3.10.5 |