zxAnBfdStdSessOperMode
ZTE-AN-BFD-STD-MIB ·
.1.3.6.1.4.1.3902.1015.16.1.2.1.14
Object
column
Enumeration
This object specifies current operating mode that BFD session is operating in.
Context
- MIB
- ZTE-AN-BFD-STD-MIB
- OID
.1.3.6.1.4.1.3902.1015.16.1.2.1.14- Type
- column
- Access
- readonly
- Status
- current
- Parent
- zxAnBfdStdSessEntry
- Table
- zxAnBfdStdSessTable
- Siblings
- 37
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | asyncModeWEchoFunction |
2 | asynchModeWOEchoFunction |
3 | demandModeWEchoFunction |
4 | demandModeWOEchoFunction |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxAnBfdStdSessIndex This object contains an index used to represent a
unique BFD session on this device. | column | ZxAnBfdStdSessIndexTC | .1.3.6.1.4.1.3902.1015.16.1.2.1.1 |
| zxAnBfdStdSessAdminStatus A transition from 'stop' to 'start' will start
the BFD state machine for the session. The state
machine will have an initial state of down.
A transition from 'start' to 'stop' wil… | column | Enumeration | .1.3.6.1.4.1.3902.1015.16.1.2.1.10 |
| zxAnBfdStdSessState The perceived state of the BFD session.
BFD State failing(5) is only applicable if this BFD
session is running version 0.
Upon creation of a new BFD session via this MIB, the
sugg… | column | Enumeration | .1.3.6.1.4.1.3902.1015.16.1.2.1.11 |
| zxAnBfdStdSessRemoteHeardFlag This object specifies status of BFD packet reception from
the remote system. Specifically, it is set to true(1) if
the local system is actively receiving BFD packets from the
remo… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3902.1015.16.1.2.1.12 |
| zxAnBfdStdSessDiag A diagnostic code specifying the local system's reason
for the last transition of the session from up(4)
to some other state. | column | ZxAnBfdStdDiag | .1.3.6.1.4.1.3902.1015.16.1.2.1.13 |
| zxAnBfdStdSessDesiredDmdMode This object indicates that the local system's
desire to use Demand mode. Specifically, it is set
to true(1) if the local system wishes to use
Demand mode or false(2) if not | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3902.1015.16.1.2.1.15 |
| zxAnBfdStdSessCtrlPlaneIndep This object indicates that the local system's
ability to continue to function through a disruption of
the control plane. Specifically, it is set
to true(1) if the local system BFD… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3902.1015.16.1.2.1.16 |
| zxAnBfdStdSessMultipointFlag This object indicates the Multipoint (M) bit for this
session. It is set to true(1) if Multipoint (M) bit is
set to 1. Otherwise, the value is set to false(2) | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3902.1015.16.1.2.1.17 |
| zxAnBfdStdSessInterface This object contains an interface index used to indicate
the interface which this BFD session is running on. This
value can be zero if there is no interface associated
with this B… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.3902.1015.16.1.2.1.18 |
| zxAnBfdStdSessPeerIpAddrType This object specifies IP address type of the neighboring IP
address which is being monitored with this BFD session.
Only values unknown(0), ipv4(1), ipv6(2), or ipv… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.3902.1015.16.1.2.1.19 |
| zxAnBfdStdSessVersionNumber The version number of the BFD protocol that this session
is running in. Write access is available for this object
to provide ability to set desired version for this
BFD session. | column | Unsigned32 | .1.3.6.1.4.1.3902.1015.16.1.2.1.2 |
| zxAnBfdStdSessPeerIpAddr This object specifies the neighboring IP address which is
being monitored with this BFD session.
It can also be used to enabled BFD on a specific
interface. The value is set to ze… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.3902.1015.16.1.2.1.20 |
| zxAnBfdStdSessGTSM Setting the value of this object to true(1) will enable GTSM
protection of the BFD session. GTSM MUST be enabled on a
singleHop(1) session if no authentication is in use. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3902.1015.16.1.2.1.21 |
| zxAnBfdStdSessGTSMTTL This object is valid only when zxAnBfdStdSessGTSM protection is
enabled on the system. This object specifies the minimum
allowed TTL for received BFD control packets. For
singleHo… | column | Unsigned32 | .1.3.6.1.4.1.3902.1015.16.1.2.1.22 |
| zxAnBfdStdSessDesiredMinTxIntv This object specifies the minimum interval, in
microseconds, that the local system would like to use when
transmitting BFD Control packets. | column | ZxAnBfdStdInterval | .1.3.6.1.4.1.3902.1015.16.1.2.1.23 |
| zxAnBfdStdSessReqMinRxIntv This object specifies the minimum interval, in
microseconds, between received BFD Control packets the
local system is capable of supporting. | column | ZxAnBfdStdInterval | .1.3.6.1.4.1.3902.1015.16.1.2.1.24 |
| zxAnBfdStdSessReqMinEchoRxIntv This object specifies the minimum interval, in
microseconds, between received BFD Echo packets that this
system is capable of supporting. | column | ZxAnBfdStdInterval | .1.3.6.1.4.1.3902.1015.16.1.2.1.25 |
| zxAnBfdStdSessDetectMult This object specifies the Detect time multiplier. | column | ZxAnBfdStdMultiplier | .1.3.6.1.4.1.3902.1015.16.1.2.1.26 |
| zxAnBfdStdSessNegInterval This object specifies the negotiated interval, in
microseconds, that the local system is transmitting
BFD Control packets. | column | ZxAnBfdStdInterval | .1.3.6.1.4.1.3902.1015.16.1.2.1.27 |
| zxAnBfdStdSessNegEchoInterval This object specifies the negotiated interval, in
microseconds, that the local system is transmitting
BFD echo packets. Value is expected to be zero if
the sessions is not running… | column | ZxAnBfdStdInterval | .1.3.6.1.4.1.3902.1015.16.1.2.1.28 |
| zxAnBfdStdSessNegDetectMult This object specifies the Detect time multiplier. | column | ZxAnBfdStdMultiplier | .1.3.6.1.4.1.3902.1015.16.1.2.1.29 |
| zxAnBfdStdSessType This object specifies the type of this BFD session. | column | Enumeration | .1.3.6.1.4.1.3902.1015.16.1.2.1.3 |
| zxAnBfdStdSessAuthPresFlag This object indicates that the local system's
desire to use Authentication. Specifically, it is set
to true(1) if the local system wishes the session
to be authenticated or false(… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3902.1015.16.1.2.1.30 |
| zxAnBfdStdSessAuthType The Authentication Type used for this BFD session.
This field is valid only when the Authentication
Present bit is set. Max-access to this object as well as
other authentication r… | column | Enumeration | .1.3.6.1.4.1.3902.1015.16.1.2.1.31 |
| zxAnBfdStdSessAuthKeyID The authentication key ID in use for this session. This
object permits multiple keys to be active simultaneously.
When zxAnBfdStdSessAuthPresFlag is false(2), then… | column | Integer32 | .1.3.6.1.4.1.3902.1015.16.1.2.1.32 |
| zxAnBfdStdSessAuthKey The authentication key. When the
zxAnBfdStdSessAuthType is simplePassword(1), the value
of this object is the password present in the BFD packets.
When the zxAnBfd… | column | OctetString | .1.3.6.1.4.1.3902.1015.16.1.2.1.33 |
| zxAnBfdStdSessIpAddrType This object specifies IP address type of the local IP
address which is being monitored with this BFD session.
Only values unknown(0), ipv4(1), ipv6(2), or ipv6z(4)
… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.3902.1015.16.1.2.1.34 |
| zxAnBfdStdSessIpAddr This object specifies the local IP address which is
being monitored with this BFD session.
It can also be used to enabled BFD on a specific
interface. The value is set to zero whe… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.3902.1015.16.1.2.1.35 |
| zxAnBfdStdSessAppType The application Type used for this BFD session. | column | Enumeration | .1.3.6.1.4.1.3902.1015.16.1.2.1.36 |
| zxAnBfdStdSessMHopUniLinkMode For zxAnBfdStdSessType of multiHopUnidirectionalLinks(4), this
object specifies whether this BFD session is running in
active(2) mode or passive(3) mode. For all other BFD
zxAnBfd… | column | Enumeration | .1.3.6.1.4.1.3902.1015.16.1.2.1.4 |
| zxAnBfdStdSessDiscriminator This object specifies the local discriminator for this BFD
session, used to uniquely identify it. | column | Unsigned32 | .1.3.6.1.4.1.3902.1015.16.1.2.1.5 |
| zxAnBfdStdSessRemoteDiscr This object specifies the session discriminator chosen
by the remote system for this BFD session. The value may
be zero(0) if the remote discriminator is not yet known
or if the … | column | Unsigned32 | .1.3.6.1.4.1.3902.1015.16.1.2.1.6 |
| zxAnBfdStdSessStorType This variable indicates the storage type for this
object. Conceptual rows having the value
'permanent' need not allow write-access to any
columnar objects in the row. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.3902.1015.16.1.2.1.60 |
| zxAnBfdStdSessRowStatus This variable is used to create, modify, and/or
delete a row in this table. When a row in this
table has a row in the active(1) state, no
objects in this row can be modified excep… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3902.1015.16.1.2.1.61 |
| zxAnBfdStdSessDestinationUdpPort This object specifies the destination UDP port used for
this BFD session. The value maybe zero(0) if the session
is in adminDown(1) state. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.3902.1015.16.1.2.1.7 |
| zxAnBfdStdSessSourceUdpPort This object specifies the source UDP port of BFD control
packets for this BFD session. The value maybe zero(0) if
the session is in adminDown(1) state. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.3902.1015.16.1.2.1.8 |
| zxAnBfdStdSessEchoSourceUdpPort This object specifies the source UDP port of BFD echo
packets for this BFD session. The value maybe zero(0) if
the session is not running in the echo mode, or the
session is in ad… | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.3902.1015.16.1.2.1.9 |