zxAnBfdSessDemandModeDesiredFlag
ZTE-AN-BFD-MIB ·
.1.3.6.1.4.1.3902.1015.15.1.20.1.7
Object
column
SNMPv2-TCTruthValue
This object indicates that the local system's desire to use Demand mode. Specifically, it is set to true(1) if the local system wishes to use Demand mode or false(0) if not
Context
- MIB
- ZTE-AN-BFD-MIB
- OID
.1.3.6.1.4.1.3902.1015.15.1.20.1.7- Type
- column
- Access
- readonly
- Status
- current
- Parent
- zxAnBfdSessEntry
- Table
- zxAnBfdSessTable
- Siblings
- 15
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxAnBfdSessApplicationType this object contains an index used to indicate
a local application which owns or maintains this
BFD session.
Register Protocol Type. | column | Enumeration | .1.3.6.1.4.1.3902.1015.15.1.20.1.1 |
| zxAnBfdSessLocalAddr This object specifies IP address of the interface
associated with this BFD session.
It can also be used to enabled BFD on a specific
interface. The value is set to zero when… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.3902.1015.15.1.20.1.10 |
| zxAnBfdSessRemoteAddrType This object specifies IP address of the interface
associated with this BFD session.
Only values ipv4(1) or ipv6(2)
have to be supported. | column | Enumeration | .1.3.6.1.4.1.3902.1015.15.1.20.1.11 |
| zxAnBfdSessRemoteAddr This object specifies remote IP address of the interface
associated with this BFD session.
It can also be used to enabled BFD on a specific
interface. The value is set to ze… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.3902.1015.15.1.20.1.12 |
| zxAnBfdSessDesiredMinTxInterval This object specifies the minimum interval, in
microseconds, that the local system would like to use when
transmitting BFD Control packets. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.15.1.20.1.13 |
| zxAnBfdSessRequiredMinRxInterval This object specifies the minimum interval, in
microseconds, between received BFD Control packets the
local system is capable of supporting. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.15.1.20.1.14 |
| zxAnBfdSessDetectMult This object specifies the Detect time multiplier. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.15.1.20.1.15 |
| zxAnBfdSessDownDiag This object specifies the local system's reason for the last change in session state. | column | Enumeration | .1.3.6.1.4.1.3902.1015.15.1.20.1.16 |
| zxAnBfdL3IfVlan | column | Integer32 | .1.3.6.1.4.1.3902.1015.15.1.20.1.2 |
| zxAnBfdSessDiscriminator This object specifies the local discriminator for this BFD
session, used to uniquely identify it. | column | Integer32 | .1.3.6.1.4.1.3902.1015.15.1.20.1.3 |
| zxAnBfdSessRemoteDiscr This object specifies the session discriminator chosen
by the remote system for this BFD session. | column | Integer32 | .1.3.6.1.4.1.3902.1015.15.1.20.1.4 |
| zxAnBfdSessUdpPort The UDP Port for BFD. The default value is the
well-known value for this port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.15.1.20.1.5 |
| zxAnBfdSessState The perceived state of the BFD session. | column | Enumeration | .1.3.6.1.4.1.3902.1015.15.1.20.1.6 |
| zxAnBfdSessEchoFuncModeDesiredFlag This object indicates that the local system's
desire to use Echo mode. Specifically, it is set
to true(1) if the local system wishes to use
Echo mode or false(0) if not | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3902.1015.15.1.20.1.8 |
| zxAnBfdSessLocalAddrType This object specifies IP address of the interface
associated with this BFD session.
Only values ipv4(1) or ipv6(2)
have to be supported. | column | Enumeration | .1.3.6.1.4.1.3902.1015.15.1.20.1.9 |