lgGroupAdminState
ZHONE-GEN-LINE-REDUNDANCY ·
.1.3.6.1.4.1.5504.3.6.3.1.7
Object
column
r/w
Enumeration
The line group admin status
- 'up' status is when the group is in use and the
lines in the group can become active. In this state,
line parameters may not be changed.
- 'down' status is set to down the entire line group.
A redundant switch does not occur and in the down
state line group parameters may be cahnged and the
entire line group may be deleted.
- 'lockAtive' status is set to allow the inactive
member of the line group to be modified. In this
state the active line is uneffected, however, if an
error occurs on the active line that would result
in a redundant switch, the switch will not occur.
Context
- MIB
- ZHONE-GEN-LINE-REDUNDANCY
- OID
.1.3.6.1.4.1.5504.3.6.3.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- lineGroupEntry
- Table
- lineGroupTable
- Siblings
- 9
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | down |
2 | up |
3 | lockActive |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| lgId The line group entry id. This is a unique number
that is obtained by the nextLineGroupId field.
The range for lgId is 1..2147483647 and the range
for nextLineGroup… | column | Integer32 | .1.3.6.1.4.1.5504.3.6.3.1.1 |
| lgRowStatus A line group entry can only be created if both the
lgName and line group id is specified.
An entry in this table CANNOT be deleted unless the
admin state is down … | column | Zhone-TCZhoneRowStatus | .1.3.6.1.4.1.5504.3.6.3.1.10 |
| lgName The name of this entry. This value is the one
utilized by the user when referencing this line group.
This is performed so the user does not have to know
the numeric id's that ha… | column | Zhone-TCZhoneAdminString | .1.3.6.1.4.1.5504.3.6.3.1.2 |
| lgPrimaryLineId The id entered in the line profile table for the
profile of the primary line. The default value of
0 indicates no primary line is configured.
When this field is … | column | InterfaceIndexOrZero | .1.3.6.1.4.1.5504.3.6.3.1.3 |
| lgPrimaryWeight The preference for this line to be active. A value of
1 is low preference, and 10 is high. Default is 5 to
match the secondary line so the default is that both
lines are equal a… | column | Integer32 | .1.3.6.1.4.1.5504.3.6.3.1.4 |
| lgSecondaryLineId The name as entered in the line profile table for the
profile of the secondary line. The default value of
0 indicates that no secondary line is configured.
When thi… | column | InterfaceIndexOrZero | .1.3.6.1.4.1.5504.3.6.3.1.5 |
| lgSecondaryWeight The preference for this line to be active. A value of
1 is low preference, and 10 is high. Default is 5 to
match the primary line so that the default is that
both lines are equ… | column | Integer32 | .1.3.6.1.4.1.5504.3.6.3.1.6 |
| lgGroupOperState The state of this line group. Normally, this state
will match the admin state of this group except
during the activation phase of the group or if
'all' active lines in the group… | column | Enumeration | .1.3.6.1.4.1.5504.3.6.3.1.8 |
| lgActiveLineId The currently active line (ifindex) for this Group.
0 indicates no active lines. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.5504.3.6.3.1.9 |