zhonePingCtlTrapGeneration

ZHONE-DISMAN-PING-MIB · .1.3.6.1.4.1.5504.4.1.19.1.3.1.12
MIB view Table view

Object

column r/w Bits 
The value of this object determines when and if
to generate a notification for this entry:
              
probeFailure(0)   - Generate a zhonePingProbeFailed
    notification subject to the value of
    zhonePingCtlTrapProbeFailureFilter.  The object
    zhonePingCtlTrapProbeFailureFilter can be used
    to specify the number of successive probe failures
    that are required before a zhonePingProbeFailed
    notification can be generated.
testFailure(1)    - Generate a zhonePingTestFailed
    notification. In this instance the object
    zhonePingCtlTrapTestFailureFilter can be used to
    determine the number of probe failures that
    signal when a test fails.
testCompletion(2) - Generate a zhonePingTestCompleted
    notification.
              
The value of this object defaults to zero, indicating
that none of the above options have been selected.

Context

MIB
ZHONE-DISMAN-PING-MIB
OID
.1.3.6.1.4.1.5504.4.1.19.1.3.1.12
Type
column
Access
readwrite
Status
current
Parent
zhonePingCtlEntry
Table
zhonePingCtlTable
Siblings
21

Syntax

Bits

Values & Constraints

Enumerated Values
0probeFailure
1testFailure
2testCompletion

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
zhonePingCtlIndex
When used in conjunction with such a security policy all entries in the table belonging to a particular user (or group) will have the same value for this initial index. For a give…
columnInteger32.1.3.6.1.4.1.5504.4.1.19.1.3.1.1
zhonePingCtlMaxRows
None
columnrows SNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.4.1.19.1.3.1.10
zhonePingCtlStorageType
The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
columnSNMPv2-TCStorageType.1.3.6.1.4.1.5504.4.1.19.1.3.1.11
zhonePingCtlTrapProbeFailureFilter
The value of this object is used to determine when to generate a zhonePingProbeFailed NOTIFICATION. Setting zhonePingCtlTrapGeneration to probeFailure(0) implies th…
columnUnsigned32.1.3.6.1.4.1.5504.4.1.19.1.3.1.13
zhonePingCtlTrapTestFailureFilter
The value of this object is used to determine when to generate a zhonePingTestFailed NOTIFICATION. Setting zhonePingCtlTrapGeneration to testFailure(1) implies that…
columnUnsigned32.1.3.6.1.4.1.5504.4.1.19.1.3.1.14
zhonePingCtlType
The value of this object is used to either report or select the implementation method to be used for calculating a ping response time. The value of this object MAY be selected fr…
columnObjectIdentifier.1.3.6.1.4.1.5504.4.1.19.1.3.1.15
zhonePingCtlDescr
The purpose of this object is to provide a descriptive name of the remote ping test.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.5504.4.1.19.1.3.1.16
zhonePingCtlSourceAddressType
Specifies the type of the source address, zhonePingCtlSourceAddress, to be used at a remote host when performing a ping operation.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.5504.4.1.19.1.3.1.17
zhonePingCtlSourceAddress
Use the specified IP address (which must be given in numeric form, not as a hostname) as the source address in outgoing probe packets. On hosts with more than one IP address, thi…
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.5504.4.1.19.1.3.1.18
zhonePingCtlIfIndex
Setting this object to an interface's ifIndex prior to starting a remote ping operation directs the ping probes to be transmitted over the specified interface. A value of zero fo…
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.5504.4.1.19.1.3.1.19
zhonePingCtlTargetAddressType
Specifies the type of host address to be used at a remote host for performing a ping operation.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.5504.4.1.19.1.3.1.2
zhonePingCtlByPassRouteTable
The purpose of this object is to optionally enable bypassing the route table. If enabled, the remote host will bypass the normal routing tables and send directly to a host on an …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.5504.4.1.19.1.3.1.20
zhonePingCtlDSField
Specifies the value to store in the Differentiated Services (DS) Field in the IP packet used to encapsulate the ping probe. The DS Field is defined as the Type of Service (TOS) o…
columnUnsigned32.1.3.6.1.4.1.5504.4.1.19.1.3.1.21
zhonePingCtlRowStatus
This object allows entries to be created and deleted in the zhonePingCtlTable. Deletion of an entry in this table results in all corresponding (same zhonePingCtlOwnerIndex and zh…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.5504.4.1.19.1.3.1.22
zhonePingCtlTargetAddress
Specifies the host address to be used at a remote host for performing a ping operation. The host address type is determined by the object value of corresponding zhonePingCtlTarge…
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.5504.4.1.19.1.3.1.3
zhonePingCtlDataSize
Specifies the size of the data portion to be transmitted in a ping operation in octets. A ping request is usually an ICMP message encoded into an IP packet. An IP packet has a m…
columnoctets Unsigned32.1.3.6.1.4.1.5504.4.1.19.1.3.1.4
zhonePingCtlTimeOut
Specifies the time-out value, in seconds, for a remote ping operation.
columnseconds Unsigned32.1.3.6.1.4.1.5504.4.1.19.1.3.1.5
zhonePingCtlProbeCount
Specifies the number of times to perform a ping operation at a remote host.
columnprobes Unsigned32.1.3.6.1.4.1.5504.4.1.19.1.3.1.6
zhonePingCtlAdminStatus
Reflects the desired state that a zhonePingCtlEntry should be in: enabled(1) - Attempt to activate the test as defined by this zhonePingCtlEntr…
columnEnumeration.1.3.6.1.4.1.5504.4.1.19.1.3.1.7
zhonePingCtlDataFill
The content of this object is used together with the corresponding zhonePingCtlDataSize value to determine how to fill the data portion of a probe packet. The option of selecting…
columnOctetString.1.3.6.1.4.1.5504.4.1.19.1.3.1.8
zhonePingCtlFrequency
The number of seconds to wait before repeating a ping test as defined by the value of the various objects in the corresponding row. A single ping test consists of a…
columnseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.4.1.19.1.3.1.9