zhoneVoipServerId

ZHONE-COM-VOIP-MIB · .1.3.6.1.4.1.5504.4.3.4.6.1.1.6
MIB view Table view

Object

column r/w Enumeration 
Identifies the voip server type.

Context

MIB
ZHONE-COM-VOIP-MIB
OID
.1.3.6.1.4.1.5504.4.3.4.6.1.1.6
Type
column
Access
readwrite
Status
current
Parent
zhoneVoipServerEntry
Table
zhoneVoipServerTable
Siblings
33

Syntax

Enumeration

Values & Constraints

Enumerated Values
1longboard
2asterisk
3sipexpressrouter
4metaswitch
5sylantro
6broadsoft
7ubiquity
8generalbandwidth
9tekelec-T6000
10generic
11sonus
12siemens
13tekelec-T9000
14lucent-telica
15nortel-cs2000
16nuera
17lucent-imerge
18coppercom
19newcross
20cisco-bts
21cirpack-utp
22italtel-issw
23cisco-pgw
24microtrol-msk10
25nortel-dms10
26verso-clarent-c5cm
27cedarpoint-safari
28huawei-softx3000
29nortel-cs1500
30taqua-t7000
31utstarcom-mswitch
32broadsoft-broadworks
33broadsoft-m6
34genband-g9
35netcentrex
36genband-g6
37alu-5060
38ericsson-apz60

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
zhoneVoipServerAddressIndex
A unique identifier of a server address when multiple addresses are configured by the MGCP entity. If one address isn't reachable, then another can be tried.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.4.3.4.6.1.1.1
zhoneVoipServerRtcpPacketInterval
RTCP packet interval, in milleseconds. Range is 2500 to 10000 ms. This object's value is only pertinent if RTCP has been enabled.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.5504.4.3.4.6.1.1.10
zhoneVoipServerInterDigitTimeout
This parameter indicates the duration, in seconds, that the device will wait after each digit is entered before assuming the user has finished entering digits.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.5504.4.3.4.6.1.1.11
zhoneVoipServerIpTos
This parameter indicates the tos value that is set in the ip header for voice of ip traffic.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.5504.4.3.4.6.1.1.12
zhoneVoipServerDomainName
This parameter indicates the Universal Resource Identifier (URI) of the system.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.5504.4.3.4.6.1.1.13
zhoneVoipServerExpiresInvite
For user agent clients, this value is inserted into the Expires header. For proxy servers, if a received request contained an Expires header, then the value in the header ta…
columnseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.4.3.4.6.1.1.14
zhoneVoipServerExpiresRegister
For user agent clients, this value is inserted into the Expires header. For registrar servers, if a received request contained an Expires header, then the value in the heade…
columnseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.4.3.4.6.1.1.15
zhoneVoipServerHeaderMethod
This convention is a bit map. Each bit represents a SIP method where the Expires header should be included. If a bit has value 1, then the requests corresponding to that SIP…
columnBits.1.3.6.1.4.1.5504.4.3.4.6.1.1.16
zhoneVoipServerSessionTimer
Support session timers on : Session timers are supported, and SIP messages will have a 'Supported: timer' header off: Session timers are NOT supported, a…
columnEnumeration.1.3.6.1.4.1.5504.4.3.4.6.1.1.17
zhoneVoipServerSessionExpiration
The time at which an element (proxy, UAC, UAS) will consider the SIP session timed out, if no successful session refresh transaction occurs beforehand.
columnseconds Unsigned32.1.3.6.1.4.1.5504.4.3.4.6.1.1.18
zhoneVoipServerSessionMinSE
Because of the processing load of mid-dialog requests, all elements (proxy, UAC, UAS) can have configured minimum value for the session interval that they are willing to accept.
columnseconds Unsigned32.1.3.6.1.4.1.5504.4.3.4.6.1.1.19
zhoneVoipServerRowStatus
Row Status is used to create, modify or delete an entry.
columnZhone-TCZhoneRowStatus.1.3.6.1.4.1.5504.4.3.4.6.1.1.2
zhoneVoipServerSessionCallerReqTimer
This field specifies the caller's action yes: Caller (UAC) will request for timer when making outbound calls no : Caller (UAC) will NOT request for timer …
columnEnumeration.1.3.6.1.4.1.5504.4.3.4.6.1.1.20
zhoneVoipServerSessionCalleeReqTimer
When caller supports timer but did not request one this field specifies the callee's action yes: Callee (UAS) will request for timer no : Callee (UAS) will NOT requ…
columnEnumeration.1.3.6.1.4.1.5504.4.3.4.6.1.1.21
zhoneVoipServerSessionCallerSpecifyRefresher
Caller specifies the refresher: UAC : Caller specifies itself (UAC) as the refresher UAS : Caller specifies the callee (UAS) as the refresher Omit: Caller does NOT …
columnEnumeration.1.3.6.1.4.1.5504.4.3.4.6.1.1.22
zhoneVoipServerSessionCalleeSpecifyRefresher
When UAC did not specify refresher tag, callee specifies the refresher: UAC : Callee specifies the caller (UAC) as the refresher UAS : Callee specifies itself (UAS…
columnEnumeration.1.3.6.1.4.1.5504.4.3.4.6.1.1.23
zhoneVoipServerDtmfMode
Indicates whether dtmf digits are to be passed as codec voice packets or special separate packets (rfc2833).
columnEnumeration.1.3.6.1.4.1.5504.4.3.4.6.1.1.24
zhoneVoipServerBehaviorStringOne
This field is used to control any switch specific behavior of the VOIP Gateway.
columncharacters OctetString.1.3.6.1.4.1.5504.4.3.4.6.1.1.25
zhoneVoipServerRtpTermIdSyntax
This field describes the Ephemeral term ID syntax for the switch. The RTP syntax varies from switch to switch.But the string should contain atleast one %eid format, eg <string>%e…
columncharacters OctetString.1.3.6.1.4.1.5504.4.3.4.6.1.1.26
zhoneVoipServerRtpDSCP
This parameter indicates DSCP value for voip's rtp traffic. NOTE:zhoneVoipServerIpTos field must be zero before entering a new value into this field. …
columnOctetString.1.3.6.1.4.1.5504.4.3.4.6.1.1.27
zhoneVoipServerSignalingDSCP
This parameter indicates DSCP value for voip's signaling traffic. Valid code values: <0-63> Differentiated services codepoint value af11 Ma…
columnOctetString.1.3.6.1.4.1.5504.4.3.4.6.1.1.28
zhoneVoipServerDtmfPayloadId
Description.
columnInteger32.1.3.6.1.4.1.5504.4.3.4.6.1.1.29
zhoneVoipServerAddrType
This object specifies the type of address contained in the associated instance of sipVoipServerAddr.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.5504.4.3.4.6.1.1.3
zhoneVoipServerRegisterReadyTimeout
For Megaco Service change Messages this value will be used in service-change-delay.
columnseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.4.3.4.6.1.1.30
zhoneVoipServerMessageRetryCount
This field specifies the number of retries of SIP message to every DNS resolved server IP addresses. The default behaviour means that the SIP message will be retransmitted to the…
columnInteger32.1.3.6.1.4.1.5504.4.3.4.6.1.1.31
zhoneVoipServerFeatures
Set of features can be enabled for voip server Bit Feature --- -------- 1 sip outbound 2 gruu
columnBits.1.3.6.1.4.1.5504.4.3.4.6.1.1.32
zhoneVoipServerTransportProtocol
This field specifies type of transport protocol configured. Possible values are udp and tcp.
columnEnumeration.1.3.6.1.4.1.5504.4.3.4.6.1.1.33
zhoneVoipSigLocalPortNumber
This field specifies signalling local port number, used when tcp is configured as tranport protocol.
columnInteger32.1.3.6.1.4.1.5504.4.3.4.6.1.1.34
zhoneVoipServerAddr
This object specifies the address of a VOIP server this user agent will use to proxy/redirect calls.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.5504.4.3.4.6.1.1.4
zhoneVoipServerUdpPortNumber
Specifies the UDP Port number for the MGCP Gateway. 2427 is the IANA Registered MGCP Gateway port.
columnInteger32.1.3.6.1.4.1.5504.4.3.4.6.1.1.5
zhoneVoipServerProtocol
The signalling protocol used for VOIP. Choicees are SIP (Session Initiation Protocol) and MGCP (Media Gateway Control Protocol).
columnEnumeration.1.3.6.1.4.1.5504.4.3.4.6.1.1.7
zhoneVoipServerSendCallProceedingTone
ndicates whether, on call originations destined to the PSTN, the device should play a call proceeding tone while waiting for ring-back tone from the switch.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.5504.4.3.4.6.1.1.8
zhoneVoipServerRtcpEnabled
Indicates whether the Real-Time Control Protocol is enabled for the device.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.5504.4.3.4.6.1.1.9