wlSecurityMACFilterMode
ZHNWIRELESS ·
.1.3.6.1.4.1.5504.2.5.46.1.3.1.24
Object
column
r/w
WlMACFilterModes
Configure the MAC Filter mode. The MAC Filter rules defined in the wlMACFilterTable will be ignored when this object is set to disable(3).
Context
- MIB
- ZHNWIRELESS
- OID
.1.3.6.1.4.1.5504.2.5.46.1.3.1.24- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- wlSecurityEntry
- Table
- wlSecurityTable
- Siblings
- 23
Syntax
WlMACFilterModes
- Source
- WlMACFilterModes
- Base type
Enumeration
Values & Constraints
Type Values
1 | allow |
2 | deny |
3 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wlSecuritySsid The primary SSID assigned to the wl0 interface,
or the Guest SSIDs assigned to this virtual wireless
interface. | column | OctetString | .1.3.6.1.4.1.5504.2.5.46.1.3.1.1 |
| wlSecurityRadiusKey Remote Authentication Dial In User Server (RADIUS) authentication key.
This field cannot contain a SPACE and is returned as a string of asterisks. | column | OctetString | .1.3.6.1.4.1.5504.2.5.46.1.3.1.10 |
| wlSecurityWepKey Security encryption strength:
bit64(1)
bit128(2) | column | WlSecurityKeyCodes | .1.3.6.1.4.1.5504.2.5.46.1.3.1.11 |
| wlSecurityCurrentWepKeyIndex64 Index into array of 64-bit encryption keys. | column | Unsigned32 | .1.3.6.1.4.1.5504.2.5.46.1.3.1.12 |
| wlSecurityCurrentWepKeyIndex128 Index into array of 128-bit encryption keys. | column | Unsigned32 | .1.3.6.1.4.1.5504.2.5.46.1.3.1.13 |
| wlSecurityWep64Key1 WEP 64-bit encryption key 1 string, which must consist of 5 ASCII characters
or 10 hexadecimal digits. | column | OctetString | .1.3.6.1.4.1.5504.2.5.46.1.3.1.14 |
| wlSecurityWep64Key2 WEP 64-bit encryption key 2 string, which must consist of 5 ASCII characters
or 10 hexadecimal digits. | column | OctetString | .1.3.6.1.4.1.5504.2.5.46.1.3.1.15 |
| wlSecurityWep64Key3 WEP 64-bit encryption key 3 string, which must consist of 5 ASCII characters
or 10 hexadecimal digits. | column | OctetString | .1.3.6.1.4.1.5504.2.5.46.1.3.1.16 |
| wlSecurityWep64Key4 WEP 64-bit encryption key 4 string, which must consist of 5 ASCII characters
or 10 hexadecimal digits. | column | OctetString | .1.3.6.1.4.1.5504.2.5.46.1.3.1.17 |
| wlSecurityWep128Key1 WEP 128-bit encryption key 1 string, which must consist of 13 ASCII characters
or 26 hexadecimal digits. | column | OctetString | .1.3.6.1.4.1.5504.2.5.46.1.3.1.18 |
| wlSecurityWep128Key2 WEP 128-bit encryption key 2 string, which must consist of 13 ASCII characters
or 26 hexadecimal digits. | column | OctetString | .1.3.6.1.4.1.5504.2.5.46.1.3.1.19 |
| wlSecurityWps Enable or disable WiFi Protected Setup (WPS) security method. If
WPS is disabled, the network authentication method, the data encryption,
and network key should also be configure… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.2.5.46.1.3.1.2 |
| wlSecurityWep128Key3 WEP 128-bit encryption key 3 string, which must consist of 13 ASCII characters
or 26 hexadecimal digits. | column | OctetString | .1.3.6.1.4.1.5504.2.5.46.1.3.1.20 |
| wlSecurityWep128Key4 WEP 128-bit encryption key 4 string, which must consist of 13 ASCII characters
or 26 hexadecimal digits. | column | OctetString | .1.3.6.1.4.1.5504.2.5.46.1.3.1.21 |
| wlSecurityWpa2Preauth Enable or disable WPA2 pre-authentication. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.2.5.46.1.3.1.22 |
| wlSecurityWpa2NetReauth Configure the WPA2 network re-authentication time, in seconds. | column | Unsigned32 | .1.3.6.1.4.1.5504.2.5.46.1.3.1.23 |
| wlSecurityAuthMode Configure the network authentication method:
mode8011x(1),
open(2),
shared(3),
wpa(4),
wpa2(5),
wpaPsk(6),
wpa2Psk(7),
mixedWpa2Wpa(8),
mixedWpa2WpaPsk(9) | column | WlAuthenticationModes | .1.3.6.1.4.1.5504.2.5.46.1.3.1.3 |
| wlSecurityWpaPsk WPA/WPAI Passphrase. This field cannot contain a SPACE and is
returned as a string of asterisks. | column | OctetString | .1.3.6.1.4.1.5504.2.5.46.1.3.1.4 |
| wlSecurityWpaGTKRekey WPA Group Rekey Interval. | column | Unsigned32 | .1.3.6.1.4.1.5504.2.5.46.1.3.1.5 |
| wlSecurityWpaMode WPA/WAPI Encryption mode:
tkip(1),
aes(2),
tkipAes(3) | column | WlWpaModes | .1.3.6.1.4.1.5504.2.5.46.1.3.1.6 |
| wlSecurityWepStatus Status of Wireless Encryption Protocol (WEP) encryption:
disabled(1)
enabled(2) | column | WlWepModes | .1.3.6.1.4.1.5504.2.5.46.1.3.1.7 |
| wlSecurityRadiusServerIP IP address of the Remote Authentication Dial In User Server (RADIUS)
used for 802.1x authentication. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5504.2.5.46.1.3.1.8 |
| wlSecurityRadiusPort UDP port to use for accessing the Remote Authentication Dial In User
Server (RADIUS). | column | Unsigned32 | .1.3.6.1.4.1.5504.2.5.46.1.3.1.9 |