sysLocalTimingReference
ZHNSYSTEM ·
.1.3.6.1.4.1.5504.2.5.2.1.1.12
Object
scalar
r/w
LTRI
Source of the sysTransmitClockSource when set to Local. This object is not supported by ZNID devices.
Context
- MIB
- ZHNSYSTEM
- OID
.1.3.6.1.4.1.5504.2.5.2.1.1.12- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- zhnSystemGeneralObjects
- Siblings
- 25
Syntax
LTRI
- Source
- LTRI
- Base type
Enumeration
Values & Constraints
Type Values
0 | notApplicable |
1 | ethernet |
2 | internal |
3 | shdsl |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| modelNumber model no. of the device | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5504.2.5.2.1.1.1 |
| zhnSysContact System contact. This object is synonomous with the MIB II system
sysContact object. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5504.2.5.2.1.1.10 |
| sysTransmitClockSource T1 Clock source for PWE device. Since both T1/E1 interfaces
will be required to have the same source, this object will
replace the dsx1TransmitClockSource object in the DS1-MIB.… | scalar | TCSI | .1.3.6.1.4.1.5504.2.5.2.1.1.11 |
| sysSynchronizationMode Determines the method of ensuring Service Clock synchronization
between the Source and Remote PWE devices. | scalar | CSMI | .1.3.6.1.4.1.5504.2.5.2.1.1.13 |
| sysSynchronousEthernet Determines whether or not to use the 25MHz clock derived from the
Synchronous Ethernet Port. This object is not supported by ZNID
devices. | scalar | SEI | .1.3.6.1.4.1.5504.2.5.2.1.1.14 |
| sysClockMode Determines the mode for which the PWE chip will be initialized. | scalar | CMI | .1.3.6.1.4.1.5504.2.5.2.1.1.15 |
| sysCfgDBAction Perform an action on the configuration database. | scalar | CDA | .1.3.6.1.4.1.5504.2.5.2.1.1.16 |
| sysSoftwareReboot Perform a software reboot. | scalar | RBT | .1.3.6.1.4.1.5504.2.5.2.1.1.17 |
| sysSystemClockSource Determines the system-level clock mode for ZNID devices.
uplink - the system will recover its clock from the configured
uplink (e.g. GPON, SPF1, SFP2, etc.).
… | scalar | SCS | .1.3.6.1.4.1.5504.2.5.2.1.1.18 |
| sysEthernetTransmitClockSource Determines the transmit clock source for all ethernet ports requiring
a clock.
internal - all ethernet ports will recover clock from the local
oscil… | scalar | ETCS | .1.3.6.1.4.1.5504.2.5.2.1.1.19 |
| macBaseAddress First MAC Address in series | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.5504.2.5.2.1.1.2 |
| sysDs1ClockSourcePort The interface name for the DS1 port providing transmit clock when the
sysSystemClockSource is set to ds1. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5504.2.5.2.1.1.20 |
| sysBootloaderVersion System bootloader (CFE) firmware version. | scalar | OctetString | .1.3.6.1.4.1.5504.2.5.2.1.1.21 |
| sysFirmwareVersion The version of firmware the system is currently running. | scalar | OctetString | .1.3.6.1.4.1.5504.2.5.2.1.1.22 |
| sysAltFirmwareVersion The alternate firmware version currently stored in system flash. | scalar | OctetString | .1.3.6.1.4.1.5504.2.5.2.1.1.23 |
| sysRestoreAltFirmwareVersion This object can be used to restore the version of firmware to
the alternate firmware version currently stored in flash. | scalar | SysFirmwareAction | .1.3.6.1.4.1.5504.2.5.2.1.1.24 |
| sysSnmpProvisioningLock This object can be set by an SNMP client to indicate that system
configuration is in progress. All other SNMP clients will be locked
out while this is set to true. This lock will … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.2.5.2.1.1.25 |
| sysSnmpProvisioningChange This object can be incremented by SNMP clients to indicate a
sysCfgDBAction save has taken place. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.2.5.2.1.1.26 |
| numberOfMacAddresses Number of MAC Address sequentially defined in the Unit starting
at the MAC Base Address. | scalar | Unsigned32 | .1.3.6.1.4.1.5504.2.5.2.1.1.3 |
| wifiNetworkType Defines the Network Type or Mode of the Unit, i.e. Mesh or Base Station | scalar | WFNT | .1.3.6.1.4.1.5504.2.5.2.1.1.4 |
| powerSupplyType Type of Power Supply that the unit is using | scalar | UPT | .1.3.6.1.4.1.5504.2.5.2.1.1.5 |
| locationLatitude The latitude of the unit's location represented in degrees decimal.
The format of the location's latitude is:
[+ | -]ddd.dddddddd
where + indicates north
… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5504.2.5.2.1.1.6 |
| locationLongitude The longitude of the unit's location represented in degrees decimal.
The format of the location's longitude is:
[+ | -]ddd.dddddddd
where + indicates east
… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5504.2.5.2.1.1.7 |
| zhnSystemAction Action parameter to handle the action on other scalars. | scalar | SNMPv2-TCRowStatus | .1.3.6.1.4.1.5504.2.5.2.1.1.8 |
| zhnSysLocation System location. This object is synonomous with the MIB II system
sysLocation object. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5504.2.5.2.1.1.9 |