dot1qPvid
ZHNLANDEVICE ·
.1.3.6.1.4.1.5504.2.5.41.1.4.1.1.10
Object
Default 802.1Q VLAN ID for this ethernet interface.
Context
- MIB
- ZHNLANDEVICE
- OID
.1.3.6.1.4.1.5504.2.5.41.1.4.1.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- lanEthernetInterfaceConfigEntry
- Table
- lanEthernetInterfaceConfigTable
- Siblings
- 16
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| lanEthernetIndex LAN Ethernet Interface Index | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.2.5.41.1.4.1.1.1 |
| lanEthernetAlias A descriptive name for this ethernet interface. | column | OctetString | .1.3.6.1.4.1.5504.2.5.41.1.4.1.1.11 |
| pauseMode The pause mode available to this connection. Enumeration of:
Auto
Enable
Disable | column | LANEthernetPauseModeValues | .1.3.6.1.4.1.5504.2.5.41.1.4.1.1.12 |
| lanEthernetAcl The access list values available to an ethernet interface. Enumeration of:
Disable
BlackList
WhiteList
Unsupported | column | LANEthernetAclValues | .1.3.6.1.4.1.5504.2.5.41.1.4.1.1.13 |
| lanEthernetAclRulesNumberofEntries The number of entries in the access list table for this ethernet interface. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.2.5.41.1.4.1.1.14 |
| lanEthernetLanFollowsWan Enable or disable this LAN interface based upon the WAN status. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.2.5.41.1.4.1.1.15 |
| lanEthernetIgmpPriorityMark The 802.1P priority value that this LAN interface will assign to ingress untagged
IGMP frames. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.2.5.41.1.4.1.1.16 |
| lanEthernetIgmpPvid The VLAN ID that this LAN interface will assign to ingress untagged IGMP frames. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.2.5.41.1.4.1.1.17 |
| lanEthernetEnable Enables or disables this interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.2.5.41.1.4.1.1.2 |
| lanEthernetStatus Indicates the status of this interface. Enumeration of:
Up
NoLink
Error
Disabled | column | LANEthernetStatusValues | .1.3.6.1.4.1.5504.2.5.41.1.4.1.1.3 |
| macAddress ASCII representation of the physical address of the interface | column | OctetString | .1.3.6.1.4.1.5504.2.5.41.1.4.1.1.4 |
| macAddressControlEnabled Indicates whether MAC Address Control is enabled or not on this
interface. MAC Address Control limits the clients that connect to
those that match a list of allowed MAC addresse… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.2.5.41.1.4.1.1.5 |
| maxBitRate The maximum upstream and downstream bit rate available to this
connection. Enumeration of:
10
100
1000
Auto | column | LANEthernetMaxBitRateValues | .1.3.6.1.4.1.5504.2.5.41.1.4.1.1.6 |
| duplexMode The duplex mode available to this connection. Enumeration of:
Half
Full
Auto | column | LANEthernetDuplexModeValues | .1.3.6.1.4.1.5504.2.5.41.1.4.1.1.7 |
| zhnIfName Ethernet interface name such as eth0, eth1. | column | OctetString | .1.3.6.1.4.1.5504.2.5.41.1.4.1.1.8 |
| zhnEthernetPriorityMark 802.1P priority value for this ethernet interface. Assigment
of priority values is done via the Layer 2 Bridge Marking Table.
Therefore, this object is read-only. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.2.5.41.1.4.1.1.9 |