mcNtwSfpExist
XXX-MIB ·
.1.3.6.1.4.1.34592.1.1.1.4.2.1.1.19
Object
column
Enumeration
Center 1G card's Network SFP indication
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | inserted |
2 | removed |
3 | na |
4 | not-support |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mcShelfIdx Shelf index | column | Enumeration | .1.3.6.1.4.1.34592.1.1.1.4.2.1.1.1 |
| mcLFPCfg Remote fault detect function, valid only on center MC card | column | Enumeration | .1.3.6.1.4.1.34592.1.1.1.4.2.1.1.10 |
| mcUpStream Center card's up stream of MC | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.34592.1.1.1.4.2.1.1.11 |
| mcDownStream Center card's down stream of MC | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.34592.1.1.1.4.2.1.1.12 |
| mcTxlink Center card's electrical port's link status | column | Enumeration | .1.3.6.1.4.1.34592.1.1.1.4.2.1.1.13 |
| mcFxlink Center card's optical port's link status | column | Enumeration | .1.3.6.1.4.1.34592.1.1.1.4.2.1.1.14 |
| mcHWLFP Center card's HW LFP, not applicable for 1G card | column | Enumeration | .1.3.6.1.4.1.34592.1.1.1.4.2.1.1.15 |
| mcHWTransmitMode Center card's HW transmit mode, not applicable for 1G card | column | Enumeration | .1.3.6.1.4.1.34592.1.1.1.4.2.1.1.16 |
| mcHWWorkMode Center card's HW work mode, not applicable for 1G card | column | Enumeration | .1.3.6.1.4.1.34592.1.1.1.4.2.1.1.17 |
| mcHWRmtCtrlMode Center card's HW remote control mode (only valid for local card).
the disable mode indicates that all SET operations must be prohibited | column | Enumeration | .1.3.6.1.4.1.34592.1.1.1.4.2.1.1.18 |
| mcCardIdx Card index | column | Enumeration | .1.3.6.1.4.1.34592.1.1.1.4.2.1.1.2 |
| mcAccSfpExist Center 1G card's Access SFP indication, applicable only for O2O type | column | Enumeration | .1.3.6.1.4.1.34592.1.1.1.4.2.1.1.20 |
| mcUtility reset, default to factory, set to HW word, etc... | column | Enumeration | .1.3.6.1.4.1.34592.1.1.1.4.2.1.1.21 |
| mcRmtDetect An identifier to indicate if there is a remote MC currently connecting to system or not | column | Enumeration | .1.3.6.1.4.1.34592.1.1.1.4.2.1.1.22 |
| mcRmtType Remote card's type | column | Enumeration | .1.3.6.1.4.1.34592.1.1.1.4.2.1.1.23 |
| mcRmtTransmitMode Remote card's transmmit mode | column | Enumeration | .1.3.6.1.4.1.34592.1.1.1.4.2.1.1.24 |
| mcRmtCurWorkMode Remote card's current work mode | column | Enumeration | .1.3.6.1.4.1.34592.1.1.1.4.2.1.1.25 |
| mcRmtCfgWorkMode Remote card's configurable work mode | column | Enumeration | .1.3.6.1.4.1.34592.1.1.1.4.2.1.1.26 |
| mcRmtLFP Remote card's LFP lamp state | column | Enumeration | .1.3.6.1.4.1.34592.1.1.1.4.2.1.1.27 |
| mcRmtTxlink Remote card's electrial port status | column | Enumeration | .1.3.6.1.4.1.34592.1.1.1.4.2.1.1.28 |
| mcRmtHWLFP Remote card's HW LFP, not applicable for 1G card | column | Enumeration | .1.3.6.1.4.1.34592.1.1.1.4.2.1.1.29 |
| mcType Center card's type | column | Enumeration | .1.3.6.1.4.1.34592.1.1.1.4.2.1.1.3 |
| mcRmtHWTransmitMode Remote card's HW transmit mode, not applicable for 1G card | column | Enumeration | .1.3.6.1.4.1.34592.1.1.1.4.2.1.1.30 |
| mcRmtHWWorkMode Remote card's HW work mode, not applicable for 1G card | column | Enumeration | .1.3.6.1.4.1.34592.1.1.1.4.2.1.1.31 |
| mcRmtLoopback Remote card's HW Loopback state | column | Enumeration | .1.3.6.1.4.1.34592.1.1.1.4.2.1.1.32 |
| mcRmtPwrDown Remote card's power down state | column | Enumeration | .1.3.6.1.4.1.34592.1.1.1.4.2.1.1.33 |
| mcRmtAccSfpExist Remote 1G card's Access SFP indication, applicable only for O2O type | column | Enumeration | .1.3.6.1.4.1.34592.1.1.1.4.2.1.1.34 |
| mcRmtUtility Rmote cards's reset, default to factory, set to HW word, etc... | column | Enumeration | .1.3.6.1.4.1.34592.1.1.1.4.2.1.1.35 |
| mcTransceiverMode Center card's optical transceiver mode.
100M card support bidi/duplex_fiber; 1G card support bidi/duplex_fiber/sfp.
Once sfp is given, the following mcTransceiverDist should be ig… | column | Enumeration | .1.3.6.1.4.1.34592.1.1.1.4.2.1.1.4 |
| mcTransceiverDist Center card's optical transceiver distance,
1 means 550m for duplex_fiber mode in case of 1G card,
otherwise it represents the real distance (unit of km). | column | Integer32 | .1.3.6.1.4.1.34592.1.1.1.4.2.1.1.5 |
| mcPortState Center card's port status, locked or unlocked | column | Enumeration | .1.3.6.1.4.1.34592.1.1.1.4.2.1.1.6 |
| mcTransmitMode Center card's transmmit mode | column | Enumeration | .1.3.6.1.4.1.34592.1.1.1.4.2.1.1.7 |
| mcCurWorkMode Center card's current work mode | column | Enumeration | .1.3.6.1.4.1.34592.1.1.1.4.2.1.1.8 |
| mcCfgWorkMode Center card's configurable work mode | column | Enumeration | .1.3.6.1.4.1.34592.1.1.1.4.2.1.1.9 |