xcmPrtGeneralMonoPrintOptimization
XEROX-PRINTER-EXT-MIB ·
.1.3.6.1.4.1.253.8.55.5.1.1.51
Object
This object enables a printing mode wherein the printer can be set to either one of two modes overall. Mode 1 is Optimized for Speed, Mode 2 is Optimized for Economy. This setting affects the overall performance of the printer and thus affects all print quality modes.
Context
- MIB
- XEROX-PRINTER-EXT-MIB
- OID
.1.3.6.1.4.1.253.8.55.5.1.1.51- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- xcmPrtGeneralEntry
- Table
- xcmPrtGeneralTable
- Siblings
- 19
Syntax
XEROX-PRINTER-EXT-TCXcmPrtGeneralMonoPrintOpt
- Source
- XEROX-PRINTER-EXT-TCXcmPrtGeneralMonoPrintOpt
- Base type
Enumeration
Values & Constraints
Type Values
1 | other |
3 | optimizeForSpeed |
4 | optimizeForEconomy |
5 | notPresent |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| xcmPrtGeneralRowStatus Manages the status of this conceptual row in the
xcmPrtGeneralTable. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.253.8.55.5.1.1.1 |
| xcmPrtGeneralHexDumpEnable This object controls whether the printer is in a special
diagnostic mode wherein all received print data is printed in
hexadecimal format.
Whether a reset or power-… | column | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.5.1.1.10 |
| xcmPrtGeneralStartupPage Used to enable or disable printing a startup page. If
enabled, a startup page will be printed shortly after
power-up, when the device is ready. Typical startup
pages include test … | column | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.5.1.1.11 |
| xcmPrtGeneralBannerPage Used to enable or disable printing banner pages at the
beginning of jobs. This is a master switch which applies
to all jobs, regardless of interpreter.
Usage: Conf… | column | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.5.1.1.12 |
| xcmPrtGeneralTonerLowStop Indicates the action taken when a low toner condition exists.
'on' indicates that the printer will stop printing when then
toner is low
'off' indicat… | column | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.5.1.1.13 |
| xcmPrtGeneralEndBannerPage Used to enable or disable printing banner pages at the
end of jobs. This is a master switch which applies
to all jobs, regardless of interpreter. | column | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.5.1.1.14 |
| xcmPrtGeneralTrayLowWarning Indicates the action taken when a input tray paper condition
'on' indicates that the printer will report the warning over
the user interfaces: Control Panel, CWIS, SNMP, etc.… | column | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.5.1.1.15 |
| xcmPrtGeneralAuxSheetPackage This object is an index into the xcmPrtAuxPackageTable.
This table is used to enable or disable printing of
auxiliary sheets at the printer box level.
The value zero shall mean no… | column | XEROX-GENERAL-TCCardinal32 | .1.3.6.1.4.1.253.8.55.5.1.1.2 |
| xcmPrtGeneralManualFeedTimeout The duration in seconds after which the printer shall either:
(a) switch to another input subunit, if the value of
prtInputNextIndex is non-zero and prtGeneralA… | column | Seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.253.8.55.5.1.1.3 |
| xcmPrtGeneralInputAutoSwitch Indicates the state of the auto input switching feature.
The value notPresent indicates the feature is not currently
supported. Exact behavior of this feature is product specific. | column | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.5.1.1.4 |
| xcmPrtGeneralOutputAutoSwitch Indicates the state of the auto output tray switching feature.
The value notPresent indicates the feature is not currently
supported. Exact behavior of this feature is product sp… | column | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.5.1.1.5 |
| xcmPrtGeneralScanlineCompaction This object enables a printing mode wherein the printer
compresses selected scanlines of raster image data as they are
received and holds them in compressed form until they are to… | column | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.5.1.1.50 |
| xcmPrtGeneralMediumClassDefault This object sets the default medium size class for the printer.
This object sets the medium size for printer management
functions such as printing the configuration sheet.
… | column | XEROX-PRINTER-EXT-TCXcmPrtMediumClassType | .1.3.6.1.4.1.253.8.55.5.1.1.6 |
| xcmPrtGeneralDarknessLevels This value indicates the maximum number of darkness levels
supported by this printer.
The level settings range from 1 to xcmPrtGeneralDarknessLevels
where 1 represents the lightes… | column | XEROX-GENERAL-TCCardinal32 | .1.3.6.1.4.1.253.8.55.5.1.1.7 |
| xcmPrtGeneralInstalledFeeder This object uniquely specifies the currently installed Feeder
hardware. Its purpose is to allow clients to determine via a
single MIB object the number and type of input trays a… | column | OctetString | .1.3.6.1.4.1.253.8.55.5.1.1.70 |
| xcmPrtGeneralInstalledFinisher This object uniquely specifies the currently installed Finisher
hardware. Its purpose is to allow clients to determine via a
single MIB object the number and type of output tray… | column | OctetString | .1.3.6.1.4.1.253.8.55.5.1.1.71 |
| xcmPrtGeneralInstalledAnalogFax This object uniquely specifies the currently installed analog
fax card. Its purpose is to allow clients to determine via a
single MIB object whether an analog fax card is instal… | column | OctetString | .1.3.6.1.4.1.253.8.55.5.1.1.72 |
| xcmPrtGeneralDarknessLevelNorm The normal setting for the darkness printing object.
The value 0 means unspecified. | column | XEROX-GENERAL-TCCardinal32 | .1.3.6.1.4.1.253.8.55.5.1.1.8 |
| xcmPrtGeneralDarknessLevelDflt The default setting for the density printing option.
The value (-2) indicates unknown.
The value (-4) indicates the auto setting. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.253.8.55.5.1.1.9 |