wfOspfIfType
Wellfleet-OSPF-MIB ·
.1.3.6.1.4.1.18.3.5.3.2.3.5.1.7
Object
column
mandatory
r/w
Enumeration
'The OSPF interface type.
By way of a default, this field may be intuited from
the corresponding value of ifType. Broadcast LANs,
such as Ethernet and IEEE 802.5, take the value
'broadcast'. Medias which allow multiple devices
to be connected but don't support a broadcast
mechanism, such as X.25, take the value 'nbma'.
Point to Point protocols take the value of
'pointtopoint'. Non-fully meshed technologies
would take the value of either 'ietf' or 'pmp'.
Passive interface take the value of 'passive'.
An example topology is a Frame Relay cloud that
does not have a PVC between every device on the cloud.
broadcast (1),
nbma (2),
pointToPoint (3)
point to multipoint - proprietary (4)
point to multipoint - standard (5)
passive (6)
Context
- MIB
- Wellfleet-OSPF-MIB
- OID
.1.3.6.1.4.1.18.3.5.3.2.3.5.1.7- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- wfOspfIfEntry
- Table
- wfOspfIfTable
- Siblings
- 33
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | broadcast |
2 | nbma |
3 | pointtopoint |
4 | pmp |
5 | ietf |
6 | passive |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wfOspfIfDelete mandatory This variable determines in an OSPF Interface has been
configured on the router. | column | Enumeration | .1.3.6.1.4.1.18.3.5.3.2.3.5.1.1 |
| wfOspfIfRetransInterval mandatory 'The number of seconds between link-state advertisement
retransmissions, for adjacencies belonging to this
interface. This value is also used when retransmitting
database descrip… | column | Integer32 | .1.3.6.1.4.1.18.3.5.3.2.3.5.1.10 |
| wfOspfIfHelloInterval mandatory 'The length of time, in seconds, between the Hello
packets that the router sends on the interface. This
value must be the same for all routers attached to a
common network.' | column | Integer32 | .1.3.6.1.4.1.18.3.5.3.2.3.5.1.11 |
| wfOspfIfRtrDeadInterval mandatory 'The number of seconds that a router's Hello packets
have not been seen before it's neighbors declare the
router down. This should be some multiple of the Hello
interval. This v… | column | Integer32 | .1.3.6.1.4.1.18.3.5.3.2.3.5.1.12 |
| wfOspfIfPollInterval mandatory 'The larger time interval, in seconds, between the
Hello packets sent to an inactive non-broadcast multi-
access neighbor.' | column | Integer32 | .1.3.6.1.4.1.18.3.5.3.2.3.5.1.13 |
| wfOspfIfDesignatedRouter mandatory 'The IP Address of the Designated Router.'
default { '00000000'H } -- 0.0.0.0 | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.18.3.5.3.2.3.5.1.14 |
| wfOspfIfBackupDesignatedRouter mandatory 'The IP Address of the Backup Designated Router.'
default { '00000000'H } -- 0.0.0.0 | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.18.3.5.3.2.3.5.1.15 |
| wfOspfIfMetricCost mandatory 'The cost of using this type of service on this
interface. The default value of the TOS 0 Metric is
10^8 / ifSpeed.
The value FFFF is distinguished to mean 'no rou… | column | Integer32 | .1.3.6.1.4.1.18.3.5.3.2.3.5.1.16 |
| wfOspfIfAuthKey mandatory 'The Authentication Key. If the Area's Authorization
Type is simplePassword, and the key length is shorter
than 8 octets, the agent will left adjust and zero fill
to 8 octets.
… | column | OctetString | .1.3.6.1.4.1.18.3.5.3.2.3.5.1.17 |
| wfOspfIfTxHellos mandatory Number of OSPF Hello packets transmitted. | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.5.3.2.3.5.1.18 |
| wfOspfIfTxDBDescripts mandatory Number of OSPF DataBase Description packets transmitted. | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.5.3.2.3.5.1.19 |
| wfOspfIfDisable mandatory 'The OSPF interface's administrative status. The value
'enabled' denotes that neighbor relationships may be
formed on the interface, and the interface will be
advertised as an in… | column | Enumeration | .1.3.6.1.4.1.18.3.5.3.2.3.5.1.2 |
| wfOspfIfTxLinkStateReqs mandatory Number of OSPF Link State Request packets transmitted. | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.5.3.2.3.5.1.20 |
| wfOspfIfTxLinkStateUpds mandatory Number of OSPF Link State Update packets transmitted. | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.5.3.2.3.5.1.21 |
| wfOspfIfTxLinkStateAcks mandatory Number of OSPF Link States Acknowledgements transmitted. | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.5.3.2.3.5.1.22 |
| wfOspfIfRxHellos mandatory Number of OSPF Hello packets received. | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.5.3.2.3.5.1.23 |
| wfOspfIfRxDBDescripts mandatory Number of OSPF DataBase Description packets received. | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.5.3.2.3.5.1.24 |
| wfOspfIfRxLinkStateReqs mandatory Number of OSPF Link State Requests received. | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.5.3.2.3.5.1.25 |
| wfOspfIfRxLinkStateUpds mandatory Number of OSPF Link State Updates received. | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.5.3.2.3.5.1.26 |
| wfOspfIfRxLinkStateAcks mandatory Number of OSPF Link State Acknowledgements received. | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.5.3.2.3.5.1.27 |
| wfOspfIfDrops mandatory Number of OSPF packets dropped because of invalid information
in the packet. | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.5.3.2.3.5.1.28 |
| wfOspfMtuSize mandatory Configure MTU size per OSPF interface
This parameter has the following values/meanings:
1 - Use the MTU specified by IP
2 - Use the MTU of ethernet, regardless of w… | column | Integer32 | .1.3.6.1.4.1.18.3.5.3.2.3.5.1.29 |
| wfOspfIfState mandatory 'The OSPF Interface State.'
down (1),
loopback (2),
waiting (3),
pointToPoint (4),
designatedRouter (5),
backupDesignatedRouter (6),
otherDesignatedRouter (7) | column | Enumeration | .1.3.6.1.4.1.18.3.5.3.2.3.5.1.3 |
| wfOspfIfMulticastForwarding mandatory The way multicasts should forwarded on this
interface; not forwarded, forwarded as data
link multicasts, or forwarded as data link uni-
casts. Data link multicasting is n… | column | Enumeration | .1.3.6.1.4.1.18.3.5.3.2.3.5.1.30 |
| wfOspfIfOpaqueOn mandatory This controls whether or not OPAQUE LSAs are to be
flooded out this interface or not. | column | Enumeration | .1.3.6.1.4.1.18.3.5.3.2.3.5.1.31 |
| wfOspfIfBwRate mandatory Available BW (token bucket rate) on the intf | column | Integer32 | .1.3.6.1.4.1.18.3.5.3.2.3.5.1.32 |
| wfOspfIfBwDepth mandatory Available BW (token bucket depth) on the intf | column | Integer32 | .1.3.6.1.4.1.18.3.5.3.2.3.5.1.33 |
| wfOspfIfMtuMismatchDetect mandatory Controls the interpretation of the MTU field in the
database description packet header. Per RFC 2178 the
MTU indicates the largest size IP packet that an OSPF
interface can recei… | column | Enumeration | .1.3.6.1.4.1.18.3.5.3.2.3.5.1.34 |
| wfOspfIfIpAddress mandatory 'The IP address of this OSPF interface.' | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.18.3.5.3.2.3.5.1.4 |
| wfOspfAddressLessIf mandatory 'For the purpose of easing the instancing of addressed
and addressless interfaces; This variable takes the
value 0 on interfaces with IP Addresses, and the
corresponding value of … | column | Integer32 | .1.3.6.1.4.1.18.3.5.3.2.3.5.1.5 |
| wfOspfIfAreaId mandatory 'A 32-bit integer uniquely identifying the area to
which the interface connects. Area ID 0.0.0.0 is used
for the OSPF backbone.'
default { '00000000'H } -- 0.0.0.0 | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.18.3.5.3.2.3.5.1.6 |
| wfOspfIfRtrPriority mandatory 'The priority of this interface. Used in multi-access
networks, this field is used in the designated router
election algorithm. The value 0 signifies that the
router is not elig… | column | Integer32 | .1.3.6.1.4.1.18.3.5.3.2.3.5.1.8 |
| wfOspfIfTransitDelay mandatory 'The estimated number of seconds it takes to transmit a
link- state update packet over this interface.' | column | Integer32 | .1.3.6.1.4.1.18.3.5.3.2.3.5.1.9 |