wfCSMACDTurboBoflDebug
Wellfleet-CSMACD-MIB ·
.1.3.6.1.4.1.18.3.4.1.1.61
Object
column
mandatory
r/w
Integer32
Special Turbo-BOFL debug mechanism to be used by Engineering and Manufacturing only. 31-24 : TMO - period of breath (amount of time between successive breaths of life) 23-16 : Number of packets per breath. 15-0 : Packet length in bytes - 22 bytes minimum. All bits set to zero will disable this attribute.
Context
- MIB
- Wellfleet-CSMACD-MIB
- OID
.1.3.6.1.4.1.18.3.4.1.1.61- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- wfCSMACDEntry
- Table
- wfCSMACDTable
- Siblings
- 68
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wfCSMACDDelete mandatory create/delete parameter, dflt = created | column | Enumeration | .1.3.6.1.4.1.18.3.4.1.1.1 |
| wfCSMACDMadr mandatory line MAC address, fixed - line driver fills in | column | OctetString | .1.3.6.1.4.1.18.3.4.1.1.10 |
| wfCSMACDOctetsRxOk mandatory Number of octets received without error | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.4.1.1.11 |
| wfCSMACDFramesRxOk mandatory Number of frames received without error | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.4.1.1.12 |
| wfCSMACDOctetsTxOk mandatory Number of octets transmitted without error | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.4.1.1.13 |
| wfCSMACDFramesTxOk mandatory Number of frames transmitted without error | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.4.1.1.14 |
| wfCSMACDDeferredTx mandatory Number of deferred transmissions | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.4.1.1.15 |
| wfCSMACDLateCollnTx mandatory Number of late collisions | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.4.1.1.16 |
| wfCSMACDExcessvCollnTx mandatory Number of excessive collisions | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.4.1.1.17 |
| wfCSMACDBablErrorTx mandatory Number of frames transmitted larger than the MTU size
in wfCSMACDMtu | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.4.1.1.18 |
| wfCSMACDBufErrorTx mandatory Number of internal buffer errors | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.4.1.1.19 |
| wfCSMACDEnable mandatory enable/disable parameter, dflt = enabled | column | Enumeration | .1.3.6.1.4.1.18.3.4.1.1.2 |
| wfCSMACDLcarTx mandatory Number of loss of carrier errors | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.4.1.1.20 |
| wfCSMACDUfloTx mandatory Number of transmitter underflow errors | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.4.1.1.21 |
| wfCSMACDFcsErrorRx mandatory Number of receiver checksum errors | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.4.1.1.22 |
| wfCSMACDAlignErrorRx mandatory Number of receiver alignment errors | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.4.1.1.23 |
| wfCSMACDLackRescErrorRx mandatory Number of receiver lack of resource errors | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.4.1.1.24 |
| wfCSMACDTooLongErrorRx mandatory Number of frames received exceeding the MTU size
in wfCSMACDMtu. | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.4.1.1.25 |
| wfCSMACDOfloRx mandatory Number of receiver overflow errors | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.4.1.1.26 |
| wfCSMACDMerr mandatory Number of internal memory errors | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.4.1.1.27 |
| wfCSMACDCerr mandatory Number of collision errors | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.4.1.1.28 |
| wfCSMACDHardwareFilter mandatory Hardware filtering parameter. | column | Enumeration | .1.3.6.1.4.1.18.3.4.1.1.29 |
| wfCSMACDState mandatory line driver state variable, Not Present, Init, Down, Up | column | Enumeration | .1.3.6.1.4.1.18.3.4.1.1.3 |
| wfCSMACDTxQueueLength mandatory Current Transmit Queue Length | column | Integer32 | .1.3.6.1.4.1.18.3.4.1.1.30 |
| wfCSMACDRxQueueLength mandatory Current Receive Queue Length | column | Integer32 | .1.3.6.1.4.1.18.3.4.1.1.31 |
| wfCSMACDTxClipFrames mandatory Number of frames clipped in driver's transmit routine due to transmit
congestion. | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.4.1.1.32 |
| wfCSMACDRxReplenMisses mandatory Number of packet buffer misses while attempting to replenish driver
receive ring. | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.4.1.1.33 |
| wfCSMACDCfgTxQueueLength mandatory Configured Transmit Queue Length. Values other than zero over-ride
the router selected values. A value of zero has a special meaning.
Zero causes router based default values to be… | column | Integer32 | .1.3.6.1.4.1.18.3.4.1.1.34 |
| wfCSMACDCfgRxQueueLength mandatory Configured Receive Queue Length. Values other than zero over-ride
the router selected values. A value of zero has a special meaning.
Zero causes router based default values to be … | column | Integer32 | .1.3.6.1.4.1.18.3.4.1.1.35 |
| wfCSMACDAlignmentMode mandatory Enables special frame re-alignment in the Line Driver. Only needed when
4 ethernet interfaces are configured on a single slot. Only needed if
experiencing transmit underflow erro… | column | Enumeration | .1.3.6.1.4.1.18.3.4.1.1.36 |
| wfCSMACDUnAlignedFrames mandatory Number of non-optimally aligned frames queued to the driver for transmit.
This statistic does not indicate that any frames have been dropped. If
the ethernet I/O board is not a Qu… | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.4.1.1.37 |
| wfCSMACDLineNumber mandatory Logical line number associated with this driver entity. | column | Integer32 | .1.3.6.1.4.1.18.3.4.1.1.38 |
| wfCSMACDLateCollnRx mandatory Number of late collisions - found in QUICC Ethernet Rx Buffer Descriptors | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.4.1.1.39 |
| wfCSMACDSlot mandatory instance ID Slot, filled in by driver | column | Integer32 | .1.3.6.1.4.1.18.3.4.1.1.4 |
| wfCSMACDModule mandatory Module number for ASN platform, filled in by driver. For non-ASN
platforms this attribute will not be used. | column | Enumeration | .1.3.6.1.4.1.18.3.4.1.1.40 |
| wfCSMACDActualConnector mandatory Actual connector number for ASN platform, filled in by
driver. For non-ASN platforms this attribute will not be used. | column | Enumeration | .1.3.6.1.4.1.18.3.4.1.1.41 |
| wfCSMACDLastChange mandatory The value of SysUpTime at the time the interface entered it's current
operational state (UP state). SysUpTime is defined as the time (in
hundredths of a second) since the network… | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.18.3.4.1.1.42 |
| wfCSMACDOutQLen mandatory The instantaneous current length of the output packet queue (in packets). | column | RFC1155-SMIGauge | .1.3.6.1.4.1.18.3.4.1.1.43 |
| wfCSMACDIntProcessings mandatory counts the number of times the interrupt service routine
has been called | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.4.1.1.44 |
| wfCSMACDTxProcessings mandatory Counts the number of times the transmit routine
has been called | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.4.1.1.45 |
| wfCSMACDRxProcessings mandatory Counts the number of times RINT processing takes place
in the interrupt service routine. | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.4.1.1.46 |
| wfCSMACDTxCmplProcessings mandatory Counts the number of times the transmit complete
processing takes place | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.4.1.1.47 |
| wfCSMACDTxQueueReductions mandatory Counts the number of times the transmit queue
has been shrinked in size due to the number of
tx clips exceeding the treshold | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.4.1.1.48 |
| wfCSMACDSingleCollisionFrames mandatory A count of successfully transmitted frames on a particular interface
for which transmission is inhibited by exactly one collision. | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.4.1.1.49 |
| wfCSMACDConnector mandatory instance ID Connector, filled in by driver. For the ASN
this attribute is an encoded value and is equal to
'module'*10 + 'connector'. Where 'module' is defined in
attribute 42 and… | column | Integer32 | .1.3.6.1.4.1.18.3.4.1.1.5 |
| wfCSMACDMultipleCollisionFrames mandatory A count of successfully transmitted frames on a particular interface
for which transmission is inhibited by more than one collision. | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.4.1.1.50 |
| wfCSMACDInternalMacTxErrors mandatory A count of frames for which transmission on a particular interface fails
due to an internal MAC sublayer transmit error. A frame is only counted
by an instance of this object if … | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.4.1.1.51 |
| wfCSMACDLineCapability mandatory If NWay is configured, this attribute contains a value that uniquely
identifies the single capability that was agreed upon by the local and
remote interfaces. If NWay is not conf… | column | Enumeration | .1.3.6.1.4.1.18.3.4.1.1.52 |
| wfCSMACDEtherChipSet mandatory This object contains an OBJECT IDENTIFIER which identifies the chipset used
to realize the interface. This object usually identifies the Medium Access
Control (MAC) chip. | column | ObjectIdentifier | .1.3.6.1.4.1.18.3.4.1.1.53 |
| wfCSMACDRxSymbolErrors mandatory A count of frames received on a particular interface with one or more
100Mb symbol errors detected. | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.4.1.1.54 |
| wfCSMACDInternalMacRxErrors mandatory A count of frames for which reception on a particular interface fails
due to an internal MAC sublayer receive error. A frame is only counted
by an instance of this object if it i… | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.4.1.1.55 |
| wfCSMACDConfigurableSpeed mandatory This attribute will be enabled(1) if the interface supports different
speed configurations. If configurable speeds are not supported on the
interface, this attribute will be disa… | column | Enumeration | .1.3.6.1.4.1.18.3.4.1.1.56 |
| wfCSMACDRxFlushes mandatory This attribute describes the number of times the hardware
has entered a state which required a flush of the RX FIFO. | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.4.1.1.57 |
| wfCSMACDTxDeadlocks mandatory This attribute describes the number of times the hardware
has entered a Tx Deadlock condition, and the software
intervenes to free up the lock. | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.4.1.1.58 |
| wfCSMACDBoflRetries mandatory bofl retries, dflt = 5 | column | Integer32 | .1.3.6.1.4.1.18.3.4.1.1.59 |
| wfCSMACDCct mandatory cct number for this line instance | column | Integer32 | .1.3.6.1.4.1.18.3.4.1.1.6 |
| wfCSMACDBoflTmoDivisor mandatory bofl tmo divisorr, dflt = 1 | column | Integer32 | .1.3.6.1.4.1.18.3.4.1.1.60 |
| wfCSMACDIfIndex mandatory IfTable Index for this line instance,
filled in by driver. For the BAC it is not the same
as the circuit number. | column | Integer32 | .1.3.6.1.4.1.18.3.4.1.1.62 |
| wfCSMACDTxFlowControlPauseFrames mandatory This attribute indicates the number of Flow Control
Pause frames transmitted. | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.4.1.1.63 |
| wfCSMACDRxFlowControlPauseFrames mandatory This attribute indicates the number of Flow Control
Pause frames received. | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.4.1.1.64 |
| wfCSMACDRxUnsupportedOpcodes mandatory This attribute indicates the number of Control
frames received that were not pause frames. | column | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.4.1.1.65 |
| wfCSMACDFlowControlEnable mandatory Flow control enable/disable parameter, dflt = enabled | column | Enumeration | .1.3.6.1.4.1.18.3.4.1.1.66 |
| wfCSMACDTxFlowControlPauseTime mandatory This attribute indicates flow control pause time in slots. | column | Integer32 | .1.3.6.1.4.1.18.3.4.1.1.67 |
| wfCSMACDTxFlowControlPauseZeroEnable mandatory Tx Pause 0 frame generation enable/disable parameter, dflt = enabled. | column | Enumeration | .1.3.6.1.4.1.18.3.4.1.1.68 |
| wfCSMACDDsqmsLineSpeed mandatory User-selected line speed for DSQMS client | column | Integer32 | .1.3.6.1.4.1.18.3.4.1.1.69 |
| wfCSMACDBofl mandatory bofl parameter, dflt = enabled | column | Enumeration | .1.3.6.1.4.1.18.3.4.1.1.7 |
| wfCSMACDBoflTmo mandatory bofl parameter, dflt = 5. A value of zero has a special meaning.
When bofl tmo is zero, the line is killed as soon as the link down
down condition is determined. | column | Integer32 | .1.3.6.1.4.1.18.3.4.1.1.8 |
| wfCSMACDMtu mandatory mtu parameter, fixed | column | Enumeration | .1.3.6.1.4.1.18.3.4.1.1.9 |