swWACSwitchHttpProtocol
WebBase-Access-Control-MIB ·
.1.3.6.1.4.1.171.12.27.1.8
Object
scalar
r/w
Enumeration
Specifies which WAC protocol runs on this TCP port.
Context
- MIB
- WebBase-Access-Control-MIB
- OID
.1.3.6.1.4.1.171.12.27.1.8- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- swWACCtrl
- Siblings
- 23
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | http |
2 | https |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| swWebAuthAdminState This object enables/disables the web-based authentication status
of the device. | scalar | Enumeration | .1.3.6.1.4.1.171.12.27.1.1 |
| swWACAuthFailOverState This object enables/disables the web-based authentication auth_failover status
of the device. When the authentication failover is enabled,
if RADIU servers authentication are unr… | scalar | Enumeration | .1.3.6.1.4.1.171.12.27.1.10 |
| swWACRadiusAuthorizationState This object enables/disables the web-based authentication RADIUS authorization status
of the device. When the RADIUS authorization state is disabled,
the assigned information fro… | scalar | Enumeration | .1.3.6.1.4.1.171.12.27.1.11 |
| swWACLocalAuthorizationState This object enables/disables the web-based authentication local authorization status
of the device. When the local authorization state is disabled,
the assigned information from … | scalar | Enumeration | .1.3.6.1.4.1.171.12.27.1.12 |
| swWACAuthClearDefaultredirpath This object is used to clear the default redirect URL that has been previously configured. | scalar | Enumeration | .1.3.6.1.4.1.171.12.27.1.13 |
| swWACVirtualIPv6Addr Specifies the WAC virtual IPv6 address which is used to accept
authentication requests from an unauthenticated host.
The virtual IP of WAC is used to accept authentica… | scalar | IPV6-TCIpv6Address | .1.3.6.1.4.1.171.12.27.1.14 |
| swWebAuthMethod This object indicates the authentication method type.
The RADIUS method is authenticated per authentication server. | scalar | Enumeration | .1.3.6.1.4.1.171.12.27.1.2 |
| swWebAuthVlanName obsolete This object indicates the authentication method VLAN name. | scalar | OctetString | .1.3.6.1.4.1.171.12.27.1.3 |
| swWACPageElementPageTitle Specifies the JWAC page title of the authenticate page. | scalar | OctetString | .1.3.6.1.4.1.171.12.27.1.30 |
| swWACPageElementLoginWindowTitle Specifies the WAC login window title mapping of the
authenticate page. | scalar | OctetString | .1.3.6.1.4.1.171.12.27.1.31 |
| swWACPageElementUserName Specifies the JWAC user name mapping of the
authenticate page. | scalar | OctetString | .1.3.6.1.4.1.171.12.27.1.32 |
| swWACPageElementPassWord Specifies the remaining JWAC password mapping of the
authenticate page. | scalar | OctetString | .1.3.6.1.4.1.171.12.27.1.33 |
| swJWACPageElementLogoutWindowTitle Specifies the JWAC logout window title mapping of the
authenticate page. | scalar | OctetString | .1.3.6.1.4.1.171.12.27.1.34 |
| swWACPageElementNotificationLine1 Used to set the notification information of line 1
in web page after successful authentication. | scalar | OctetString | .1.3.6.1.4.1.171.12.27.1.35 |
| swWACPageElementNotificationLine2 Used to set the notification information of line 2
in web page after successful authentication. | scalar | OctetString | .1.3.6.1.4.1.171.12.27.1.36 |
| swWACPageElementNotificationLine3 Used to set the notification information of line 3
in web page after successful authentication. | scalar | OctetString | .1.3.6.1.4.1.171.12.27.1.37 |
| swWACPageElementNotificationLine4 Used to set the notification information of line 4
in web page after successful authentication. | scalar | OctetString | .1.3.6.1.4.1.171.12.27.1.38 |
| swWACPageElementNotificationLine5 Used to set the notification information of line 5
in web page after successful authentication. | scalar | OctetString | .1.3.6.1.4.1.171.12.27.1.39 |
| swWebAuthAllPortstate obsolete This object enables/disables the authentication state of all ports on the device. | scalar | Enumeration | .1.3.6.1.4.1.171.12.27.1.4 |
| swWebAuthDefaultredirpath The URL that the client will be redirected to after successful authentication.
Initially, the redirected path is an empty string.
It must be specified by the user before the funct… | scalar | OctetString | .1.3.6.1.4.1.171.12.27.1.5 |
| swWebAuthLogouttimer obsolete The authenticated port will revert to an un-authenticated state after the logout times out.
When the value is 0, it means the logout timer is infinite and the authenticated port
… | scalar | Integer32 | .1.3.6.1.4.1.171.12.27.1.6 |
| swWACVirtualIpAddr Specifies the WAC virtual IP address which is used to accept
authentication requests from an unauthenticated host.
The virtual IP of WAC is used to accept authenticati… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.171.12.27.1.7 |
| swWACSwitchHttpPort Specifies the TCP port which the WAC switch listens to and uses
to finish the authenticating process. | scalar | Integer32 | .1.3.6.1.4.1.171.12.27.1.9 |