wwpLeosSwXgradeOptype

The possible operations upgrading the software. 
The description of each option is given below:
                
none : No upgrade operation is selected.
          
download : This operation to initiate the file transfer of software package from
          TFTP server specified by wwpLeosTceSwXgradePackagePath to 
          wwpLeosTceSwXgradeDestPath.  The default TFTP server will be used 
          for file transfer if the wwpLeosTceSwXgradeTftpServer is set to
          empty string.
                     
install : This operation to install the software to the standby CM (if present)
         and all line cards. The image files are either stored in the TFTP server
         specified by wwpLeosTceSwXgradePackagePath and wwpLeosTceSwXgradeTftpServer
         or the compact flash of the active CM.
                            
activate : This operation to activate any new software installed on all the blades.
          the system will automatically revert to the previous software package 
          if a protect operation is not set within a time period specified by 
          wwpLeosTceSwXgradeRevertTimeout.  If no time period is specified 
          (wwpLeosTceSwXgradeRevertTimeout value 0)
          then the system will not revert automatically and it will remain in 
          the unprotected state indefinitely.  
          WARNING: Activating software requires a system restart.
                                           
protect : This operation to protect a new software package.  If the protect operation 
         is not entered before the protect timeout is reached specified by
         wwpLeosTceSwXgradeRevertTimeout, the system will 
         automatically revert to the previous software package.  
          
revert : This operation to revert to the previous software package.
          
validate : This operation to validate the software package at the location
          specified by the wwpLeosTceSwXgradePackagePath. Setting the 
          wwpLeosTceSwXgradePackagePath to empty string will validate the installed software.
          
run : This operation refers to the downloading, parsing, and executing of a specified
     command file as initiated through CLI, DHCP or the file transfer MIB module.
     This is used in appropriate notifications to report completion of such event.
     An error will be returned when this object is attempted to be set to this value
     using an SNMP set-request.

MIB

WWP-LEOS-SW-XGRADE-MIB

OID

.1.3.6.1.4.1.6141.2.60.10.1.1.25

Type

scalar

Access

readwrite

Status

current

Parent

wwpLeosSwXgrade

Siblings

5