wwpLeosSwXgradeOp

WWP-LEOS-SW-XGRADE-MIB · .1.3.6.1.4.1.6141.2.60.10.1.1.2.1.3
MIB view Table view

Object

column r/w SwXgradeOp 
The Xgrade operation to be performed on the 
specified blade. Following option can be set.
              
none:                       No upgrade option is selected.
              
install:                    This option will install the software 
                            on the specified blade, if 
                            the software is not currently installed there.
                             
inServiceActivate :         This option will activate any new software 
                            installed on the specified blade (or all the blades)
                            only if the installation is not service affecting. 
                            The option will fail if the blade cannot be activated 
                            without affecting service.
                                            
serviceAffectingActivate :  This option will activate any new software 
                            installed on the specified blade.
                            It will attempt to do so without affecting service, 
                            but will override if necessary.
                                          
inServiceXgrade:           This option will Xgrade the specified blade 
                            without affecting the services. 
                            If inServiceXgrade is not possible for the blade,
                            then setting this option will result in Error and 
                            a service affecting report will be generated.
                                          
serviceAffectingXgrade:    This option will Xgrade the specified blade 
                            with minimum service affecting downtime.
                                          
                  
servAffectingXgradeReport:  This option will generate a service affecting report for a 
                            blade to go to the specified package.
				 Report file will be stored in local flash at following location 
				 (/flash0/software/xgrade-sequence.txt)
              
 servNonAffectingXgradeReport:  This option will generate a service non affecting report for a 
                            blade to go to the specified package.
				 Report file will be stored in local flash at following location 
				 (/flash0/software/xgrade-sequence.txt)

Context

MIB
WWP-LEOS-SW-XGRADE-MIB
OID
.1.3.6.1.4.1.6141.2.60.10.1.1.2.1.3
Type
column
Access
readwrite
Status
current
Parent
wwpLeosSwXgradeBladeEntry
Table
wwpLeosSwXgradeBladeTable
Siblings
11

Syntax

SwXgradeOp
Source
SwXgradeOp
Base type
Enumeration

Values & Constraints

Type Values
0none
1install
2inServiceActivate
3serviceAffectingActivate
4inServiceXgrade
5serviceAffectingXgrade
6servAffectingXgradeReport
7servNonAffectingXgradeReport
8download
9cancelDownload

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
wwpLeosSwXgradeBladeId
The object indicates the unique id for the blade. The id zero is reserved for chassis and the corresponding Xgrade entry will be applied to all the blades.
columnInteger32.1.3.6.1.4.1.6141.2.60.10.1.1.2.1.1
wwpLeosSwXgradeLoginId
The username to use for xftp downloads.
columnOctetString.1.3.6.1.4.1.6141.2.60.10.1.1.2.1.10
wwpLeosSwXgradePassword
The password to use for xftp downloads.
columnOctetString.1.3.6.1.4.1.6141.2.60.10.1.1.2.1.11
wwpLeosSwXgradeSecret
The secret to use for xftp downloads.
columnOctetString.1.3.6.1.4.1.6141.2.60.10.1.1.2.1.12
wwpLeosSwXgradePackage
The package name to be Xgraded.
columnOctetString.1.3.6.1.4.1.6141.2.60.10.1.1.2.1.2
wwpLeosSwXgradeTftpAddrType
Specifies the wwpLeosSwXgradeTftpAddr type. It can be set to 1 for IPV4 type addresses or can be set to 16 for host name.
columnIANA-ADDRESS-FAMILY-NUMBERS-MIBAddressFamilyNumbers.1.3.6.1.4.1.6141.2.60.10.1.1.2.1.4
wwpLeosSwXgradeTftpAddr
The ip address of the TFTP server or the host name from which the software package should be downloaded. This is optional. Address must be a unicast address or host name that is…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.6141.2.60.10.1.1.2.1.5
wwpLeosSwXgradeOpActivate
Setting this object to 'true' will activate the Xgrade operation for the blade.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6141.2.60.10.1.1.2.1.6
wwpLeosSwXgradeOpStatus
Display the result of the wwpLeosSwXgradeOpActivate.
columnEnumeration.1.3.6.1.4.1.6141.2.60.10.1.1.2.1.7
wwpLeosSwXgradePackagePath
Specifies the path for the package. If this object is set, then device will prepend the package name specified by wwpLeosSwXgradePackage object with wwpLeosSwXgradePackagePath. …
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.6141.2.60.10.1.1.2.1.8
wwpLeosSwXgradeTransferMode
The type of server to use.
columnEnumeration.1.3.6.1.4.1.6141.2.60.10.1.1.2.1.9