wwpLeosRadiusClientServerTimeouts
WWP-LEOS-RADIUS-CLIENT-MIB ·
.1.3.6.1.4.1.6141.2.60.20.1.1.6.1.15
Object
column
SNMPv2-SMICounter32
The number of authentication timeouts to this server. After a timeout the client may retry to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as a Request as well as a timeout.
Context
- MIB
- WWP-LEOS-RADIUS-CLIENT-MIB
- OID
.1.3.6.1.4.1.6141.2.60.20.1.1.6.1.15- Type
- column
- Access
- readonly
- Status
- current
- Parent
- wwpLeosRadiusClientServerEntry
- Table
- wwpLeosRadiusClientServerTable
- Siblings
- 20
Syntax
SNMPv2-SMICounter32
- Source
- SNMPv2-SMICounter32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wwpLeosRadiusClientServerIndex Specifies the index of this table. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.1 |
| wwpLeosRadiusClientServerAccessRejects The number of RADIUS Access-Reject packets
(valid or invalid) received from this server. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.10 |
| wwpLeosRadiusClientServerAccessChallenges The number of RADIUS Access-Challenge packets
(valid or invalid) received from this server. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.11 |
| wwpLeosRadiusClientServerMalformedAccessResponses The number of malformed RADIUS Access-Response
packets received from this server.
Malformed packets include packets with
an invalid length. Bad authenticators or
Signature attribu… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.12 |
| wwpLeosRadiusClientServerBadAuthenticators The number of RADIUS Access-Response packets
containing invalid authenticators or Signature
attributes received from this server. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.13 |
| wwpLeosRadiusClientServerPendingRequests The number of RADIUS Access-Request packets
destined for this server that have not yet timed out
or received a response. This variable is incremented
when an Access-Request is sen… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.14 |
| wwpLeosRadiusClientServerUnknownTypes The number of RADIUS packets of unknown type which
were received from this server on the authentication port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.16 |
| wwpLeosRadiusClientServerPacketsDropped The number of RADIUS packets of which were
received from this server on the authentication port
and dropped for some other reason. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.17 |
| wwpLeosRadiusClientServerStatus To create a row in this table, a manager must
set this object to createAndGo(4).
While creating entry the following mib objects must be specified
wwpLeosRadiusClie… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.18 |
| wwpLeosRadiusClientServerApplication This object specifies how the radius server should be used for authentication.
Whether this radius server should be used for userLogin authentication or dot1x authentication
or b… | column | Enumeration | .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.19 |
| wwpLeosRadiusClientServerAddr Host name or ip address of the RADIUS server. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.2 |
| wwpLeosRadiusClientServerResolvedInetAddrType Specifies the resolved IP address type. This OID is used in conjunction
with wwpLeosRadiusClientServerInetAddrress.
When set to :
ipv4 : wwpLeosRadiusClientServerInetAddress sho… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.20 |
| wwpLeosRadiusClientServerResolvedInetAddress Specifies the resolved IP address if wwpLeosRadiusClientServerAddr is set to host name.
If wwpLeosRadiusClientServerAddr is set to ip address then
wwpLeosRadiusClientServerResolv… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.21 |
| wwpLeosRadiusClientServerResolvedAddr When wwpLeosRadiusClientServerAddr represents:
Host name : The resolved address will either be Ipv4 address or Ipv6 address.
Ipv4 address : The resolved address will be the sa… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.3 |
| wwpLeosRadiusClientServerPriority Specifies the priority of radius servers configured on the device. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.4 |
| wwpLeosRadiusClientServerAuthPort The destination UDP port number to which RADIUS
messages should be sent. The RADIUS server will not be
used for authentication if this port number is 0. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.5 |
| wwpLeosRadiusClientServerRoundTripTime The time interval (in hundredths of a second) between
the most recent Access-Reply/Access-Challenge and the
Access-Request that matched it from this RADIUS
authentication server. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.6 |
| wwpLeosRadiusClientServerAccessRequests The number of RADIUS Access-Request packets sent
to this server. This does not include retransmissions. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.7 |
| wwpLeosRadiusClientServerAccessRetransmissions The number of RADIUS Access-Request packets
retransmitted to this RADIUS authentication server. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.8 |
| wwpLeosRadiusClientServerAccessAccepts The number of RADIUS Access-Accept packets
(valid or invalid) received from this server. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.9 |