wwpLeosPortXcvrConnectorType
WWP-LEOS-PORT-XCVR-MIB ·
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.5
Object
column
Integer32
Type of connector.
unknown(1),
sc(2),
fiberChannelStyle1(3),
fiberChannelStyle2(4),
bnc/tnc(5),
coaxialHeader(6),
fiberJack(7),
lc(8),
mt-rj(9),
mu(10),
sg(11),
opticalPitTail(12),
reserved(13..32),
hssdc(33),
copperPitTail(34),
reserved(35..128),
vendorSpecific(129..256).
Context
- MIB
- WWP-LEOS-PORT-XCVR-MIB
- OID
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- wwpLeosPortXcvrEntry
- Table
- wwpLeosPortXcvrTable
- Siblings
- 85
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wwpLeosPortXcvrId The ID for the transceiver. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.1 |
| wwpLeosPortXcvrRevNum String containing this transceiver's part revision number. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.10 |
| wwpLeosPortXcvrXfpLaserLastWavelength This represents the last wavelength in pico meter | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.100 |
| wwpLeosPortXcvrXfpLaserFirstChannel This represents the first channel number | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.101 |
| wwpLeosPortXcvrXfpLaserLastChannel This represents the last channel number | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.102 |
| wwpLeosPortXcvrOperFrequency The operational frequency of the transceiver in GHz | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.103 |
| wwpLeosPortXcvrOperWavelength The operational wavelength of the transceiver in pico-meter | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.104 |
| wwpLeosPortXcvrRxDbmPower Indicates the Rx power level in dBm after scaling and conversion to an integer.
To convert back to dBm, convert this value to floating point and divide by 10,000. | column | dBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.105 |
| wwpLeosPortXcvrTxDbmPower Indicates the Tx power level in dBm after scaling and conversion to an integer.
To convert back to dBm, convert this value to floating point and divide by 10,000. | column | dBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.106 |
| wwpLeosPortXcvrHighTxDbmPwAlarmThreshold Indicates the higher threshold for Tx power alarm in dBm after scaling and conversion to an integer.
To convert back to dBm, convert this value to floating point and divide by 10,… | column | dBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.107 |
| wwpLeosPortXcvrLowTxDbmPwAlarmThreshold Indicates the lower threshold for Tx power alarm in dBm after scaling and conversion to an integer.
To convert back to dBm, convert this value to floating point and divide by 10,0… | column | dBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.108 |
| wwpLeosPortXcvrHighRxDbmPwAlarmThreshold Indicates the higher threshold for Rx power alarm in dBm after scaling and conversion to an integer.
To convert back to dBm, convert this value to floating point and divide by 10,… | column | dBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.109 |
| wwpLeosPortXcvrSerialNum String containing this transceiver's part serial number. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.11 |
| wwpLeosPortXcvrLowRxDbmPwAlarmThreshold Indicates the lower threshold for Rx power alarm in dBm after scaling and conversion to an integer.
To convert back to dBm, convert this value to floating point and divide by 10,0… | column | dBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.110 |
| wwpLeosPortXcvrEncodingType If wwpLeosPortXcvrIdentiferType is SFP, then the following values is defined for the encoding type:
unspecified(1),
8B10B(2),
4b5b(3),
NRZ(4),
Manchester(5),
SONET(6),
reserved(7-… | column | Integer32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.12 |
| wwpLeosPortXcvrMfgDate The transceiver's manufacture date in string. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.13 |
| wwpLeosPortXcvrComplianceVer This represents the compliance version.
Value 1 means digital diagnostic functionality
not included or undefined
Value 2 means includes functionality defined in
Rev 9.0 SFF-8472… | column | Integer32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.14 |
| wwpLeosPortXcvrWaveLength This represents the wavelength of the transceiver. Units are nano meter. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.15 |
| wwpLeosPortXcvrTemperature This represents the temperature of the transceiver. Units are in degrees C | column | centigrade Integer32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.16 |
| wwpLeosPortXcvrVcc This represents the voltage of the transceiver. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.17 |
| wwpLeosPortXcvrBias This represents the bias of the transceiver. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.18 |
| wwpLeosPortXcvrRxPower This represents the measured receive power of the transceiver.
Units are micro Watts. | column | uW Integer32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.19 |
| wwpLeosPortXcvrOperState The operational state of the transceiver. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.2 |
| wwpLeosPortXcvrTxState Indicates whether this transceiver is currently set to transmit. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.20 |
| wwpLeosPortXcvrTxFaultStatus Indicates the fault status of this transceiver. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.21 |
| wwpLeosPortXcvrRxRateStatus Indicates the Rx rate status of this transceiver. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.22 |
| wwpLeosPortXcvr9by125um Indicates the link length for 9/125um fiber. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.23 |
| wwpLeosPortXcvr50by125um Indicates the link length for 50/125um fiber. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.24 |
| wwpLeosPortXcvr62dot5by125um Indicates the link length for 62.5/125um fiber. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.25 |
| wwpLeosPortXcvrCu Indicates the link length for copper. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.26 |
| wwpLeosPortXcvrTxOutputPw Indicates the Tx Output power for the transceiver.
Units are micro Watts. | column | uW Integer32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.27 |
| wwpLeosPortXcvrLosState Indicates the Loss Of Signal State for the optical transceiver.
Ports without optical transceiver will always report 'false'. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.28 |
| wwpLeosPortXcvrDiagSupported Indicates if diagnostics are supported on this transceiver. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.29 |
| wwpLeosPortXcvrIdentiferType Type for the transceiver. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.3 |
| wwpLeosPortXcvrEnhDiagAlarmSupported Indicates if enhanced diagnostics alarms / warnings implemented. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.30 |
| wwpLeosPortXcvrEnhDiagSoftTxDisableSupported Indicates if enhanced diagnostics soft Tx disable control is implemented. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.31 |
| wwpLeosPortXcvrEnhDiagSoftTxFaultSupported Indicates if enhanced diagnostics soft Tx fault monitoring is implemented. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.32 |
| wwpLeosPortXcvrEnhDiagRxLosSupported Indicates if enhanced diagnostics Rx LOS monitoring is implemented. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.33 |
| wwpLeosPortXcvrHighTempAlarmThreshold Indicates the higher threshold for temperature alarm. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.34 |
| wwpLeosPortXcvrLowTempAlarmThreshold Indicates the lower threshold for temperature alarm. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.35 |
| wwpLeosPortXcvrHighVccAlarmThreshold Indicates the higher threshold for voltage alarm. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.36 |
| wwpLeosPortXcvrLowVccAlarmThreshold Indicates the lower threshold for voltage alarm. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.37 |
| wwpLeosPortXcvrHighBiasAlarmThreshold Indicates the higher threshold for bias alarm. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.38 |
| wwpLeosPortXcvrLowBiasAlarmThreshold Indicates the lower threshold for bias alarm. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.39 |
| wwpLeosPortXcvrExtIdentiferType Extended identifier type for this transceiver. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.4 |
| wwpLeosPortXcvrHighTxPwAlarmThreshold Indicates the higher threshold for Tx power alarm.
Units are micro watts | column | uW SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.40 |
| wwpLeosPortXcvrLowTxPwAlarmThreshold Indicates the lower threshold for Tx power alarm.
Units are micro watts. | column | uW SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.41 |
| wwpLeosPortXcvrHighRxPwAlarmThreshold Indicates the higher threshold for Rx power alarm.
Units are micro watts. | column | uW SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.42 |
| wwpLeosPortXcvrLowRxPwAlarmThreshold Indicates the lower threshold for Rx power alarm.
Units are micro watts. | column | uW SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.43 |
| wwpLeosPortXcvrEnhDiagRateSelectSupported Indicates if enhanced diagnostics soft rate select control is implemented. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.44 |
| wwpLeosPortXcvrAdminState The admin state of the transceiver. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.45 |
| wwpLeosPortXcvrType Type of Transceiver. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.6 |
| wwpLeosPortXcvrVendorName String containing this transceiver's vendor name. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.7 |
| wwpLeosPortXcvrXfpMinBitRate This represents the minimum bit rate. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.70 |
| wwpLeosPortXcvrXfpMaxBitRate This represents the maximum bit rate. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.71 |
| wwpLeosPortXcvrXfpLinkLenSmf1km This represents the length (SMF fiber) 1km. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.72 |
| wwpLeosPortXcvrXfpLinkLenE50u2m This represents the length (ext. BW MMF) 2m. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.73 |
| wwpLeosPortXcvrXfpLinkLen50u1m This represents the length (50um) 1m. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.74 |
| wwpLeosPortXcvrXfpLinkLen62dot5u1m This represents the length (62.5um) 1m. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.75 |
| wwpLeosPortXcvrXfpLinkLenCopper1m This represents the length (copper) 1m. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.76 |
| wwpLeosPortXcvrXfpDevTech This represents the device technology. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.77 |
| wwpLeosPortXcvrXfpTransmitterTech This represents the device transmitter technology:
Bit 3: Wavelength Control (active/none)
Bit 2: Transmitter Cooling (cooled/uncooled)
Bit 1: Detector Type (apd/pin)
Bit 0: Trans… | column | Integer32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.78 |
| wwpLeosPortXcvrXfpCdrSupport This represents the CDR support:
Bit 7: 9.95 Gb/s (yes/no)
Bit 6: 10.3 Gb/s (yes/no)
Bit 5: 10.5 Gb/s (yes/no)
Bit 4: 10.7 Gb/s (yes/no)
Bit 3: 11.1 Gb/s (yes/no)
Bit 2: … | column | Integer32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.79 |
| wwpLeosPortXcvrVendorOUI String containing this transceiver's vendor OUI. | column | OctetString | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.8 |
| wwpLeosPortXcvrXfpWaveLengthTol This represents the wavelength tolerance. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.80 |
| wwpLeosPortXcvrXfpMaxCaseTemp This represents the maximum case temperature. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.81 |
| wwpLeosPortXcvrXfpMaxPower This represents the maximum power dissipation. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.82 |
| wwpLeosPortXcvrXfpMax5vCurrent This represents the 5.0 Volt Max Current. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.83 |
| wwpLeosPortXcvrXfpMax3p3vCurrent This represents the 3.3 Volt Max Current. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.84 |
| wwpLeosPortXcvrXfpMax1p8vCurrent This represents the 1.8 Volt Max Current. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.85 |
| wwpLeosPortXcvrXfpMaxNeg5p2vCurrent This represents the -5.2 Volt Max Current. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.86 |
| wwpLeosPortXcvrXfpDiagMonitorType This represents the diag monitor type:
Bit 4 indicates BER support.
Bit 3 indidates the Rx Power Meas. type of Avg or OMA. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.87 |
| wwpLeosPortXcvrXfpEnhancedOptions This represents the enhanced options:
Bit 7: VPS Support (yes/no)
Bit 6: Soft TX_DISABLE (yes/no)
Bit 5: Soft P_down (yes/no)
Bit 4: VPS LV Regulator Mode (yes/no)
Bit 3: VPS bypa… | column | Integer32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.88 |
| wwpLeosPortXcvrXfpAuxMonitoringInput1 This represents the Aux monitoring of A/D input 1. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.89 |
| wwpLeosPortXcvrVendorPN String containing this transceiver's vendor OUI. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.9 |
| wwpLeosPortXcvrXfpAuxMonitoringInput2 This represents the Aux monitoring of A/D input 2. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.90 |
| wwpLeosPortXcvrAdminFrequency The admin frequency of the transceiver in GHz | column | Unsigned32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.91 |
| wwpLeosPortXcvrXfpLaserFirstFrequency This represents the first frequency in GHz | column | Unsigned32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.92 |
| wwpLeosPortXcvrXfpLaserLastFrquency This represents the last frequency in GHz | column | Unsigned32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.93 |
| wwpLeosPortXcvrXfpMaxGridScacing This represents the maximun support grid spacing in GHz | column | Integer32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.94 |
| wwpLeosPortXcvrXfpChannelNum This represents the channel number | column | Integer32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.95 |
| wwpLeosPortXcvrXfpFrequencyError This represents the frequency error | column | Integer32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.96 |
| wwpLeosPortXcvrAdminWavelength The admin wavelength of the transceiver in pico-meter | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.97 |
| wwpLeosPortXcvrAdminChannel The admin channel number of the transceiver | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.98 |
| wwpLeosPortXcvrXfpLaserFirstWavelenth This represents the first wavelength in pico meter | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.99 |