wwpLeosCfmRemoteMEPOperState

WWP-LEOS-CFM-MIB · .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.3
MIB view Table view

Object

column Enumeration 
The operational state of the Remote MEP State Machine.
disabled represents that remote mep is admin disabled.
enabled represents that remote mep is operationally enabled
hold represents that remote mep is admin enabled but currently in operational hold state
holdLocked represents that remote mep is locked in hold state.

Context

MIB
WWP-LEOS-CFM-MIB
OID
.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.3
Type
column
Access
readonly
Status
current
Parent
wwpLeosCfmRemoteMEPEntry
Table
wwpLeosCfmRemoteMEPTable
Siblings
43

Syntax

Enumeration

Values & Constraints

Enumerated Values
1disabled
2enabled
3hold
4holdLocked

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
wwpLeosCfmRemoteMEPID
This object is used as index in the table and is used to specify the MEPID.
columnUnsigned32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.1
wwpLeosCfmRemoteMEPNumCCMRx
This object is used to show the number of MEP CCM frames received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.10
wwpLeosCfmRemoteMEPNumDMMSent
The number of DMM frames sent.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.11
wwpLeosCfmRemoteMEPDelay
This object is used to show the average Delay in microseconds during the last Delay Measurement test.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.12
wwpLeosCfmRemoteMEPJitter
This object is used to show the average Jitter in microseconds during the last Delay Measurement test.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.13
wwpLeosCfmRemoteMEPNumLMMSent
This object is used to show the number of LMM frames sent.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.14
wwpLeosCfmRemoteMEPFrameLossNear
This object is used to show the near side Frame Loss during the last Frame Loss Measurement test.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.15
wwpLeosCfmRemoteMEPFrameLossFar
This object is used to show the far side Frame Loss during the last Frame Loss Measurement test.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.16
wwpLeosCfmRemoteMEPNumLMRReceived
This object is used to show the number of LMR frames received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.17
wwpLeosCfmRemoteMEPNumCCMLost
This object is used to show the number of MEP CCM frames lost, as calculated by watching for CCM sequence errors.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.18
wwpLeosCfmRemoteMEPNumDMRReceived
This object is used to show the number of DMR frames received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.19
wwpLeosCfmRemoteMEPAdminState
The administrative state of the Remote MEP State Machine.
columnEnumeration.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.2
wwpLeosCfmRemoteMEPHoldState deprecated
This object is used to set the remote MEP Hold State
columnEnumeration.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.20
wwpLeosCfmRemoteMEPRowStatus
This object is used to create entries in remote mep table
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.21
wwpLeosCfmRemoteMEPCCMComment
This mib object contains the CCM Comment, if available, that was sent by the remote Ciena device.
columnOctetString.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.22
wwpLeosCfmRemoteMEPBadSequence
This mib object contains the number of LMR frames received with bad sequence number, for a given service and remote mep.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.23
wwpLeosCfmRemoteMEPMinDelay
The minimum Delay in microseconds during the last Delay Measurement test.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.24
wwpLeosCfmRemoteMEPMaxDelay
The maximum Delay in microseconds during the last Delay Measurement test.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.25
wwpLeosCfmRemoteMEPMinJitter
The minimum jitter in microseconds during the last Delay Measurement test.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.26
wwpLeosCfmRemoteMEPMaxJitter
The maximum jitter in microseconds during the last Delay Measurement test.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.27
wwpLeosCfmRemoteCfmMEPHoldState
Hold-state for the remote-mep entry.
columnEnumeration.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.28
wwpLeosCfmRemoteMEPServiceClear
Setting this object to true causes the remote MEP for this service to be re-initialized .
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.29
wwpLeosCfmRemoteMEPServiceStatisticsClear
Setting this object to true resets the statistics for the remote MEP for this service.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.30
wwpLeosCfmRemoteMEPTime
This object is used to specify the time at which the Remote MEP State Machine last entered RMEP_FAILED or RMEP_OK states.
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.4
wwpLeosCfmRemoteMEPAccelerated
Specifies if the remote-mep is monitored in the hardware.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.49
wwpLeosCfmRemoteMEPMacAddr
This object is used to specify the MAC address of the remote MEP.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.5
wwpLeosCfmRemoteMEPSubPortName
The object indicates the unique index for the module.
columnOctetString.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.50
wwpLeosCfmRemoteMEPServiceName
This object is used to specify the Service name.
columnOctetString.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.51
wwpLeosCfmRemoteMEPBayIndex
This object is used as to specify the agent bay that MEP is in.
columnUnsigned32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.52
wwpLeosCfmRemoteMEPShelfIndex
This object is used as to specify the agent shelf that MEP is in.
columnUnsigned32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.53
wwpLeosCfmRemoteMEPModuleIndex
This object is used as to specify the agent module that MEP is in. Index = 255 is reserved for Lag ports and this this object cannot be set to 255 in this table.
columnUnsigned32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.54
wwpLeosCfmRemoteMEPPreviousBayIndex
This object is used as to specify the agent bay that MEP was previously in.
columnUnsigned32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.55
wwpLeosCfmRemoteMEPPreviousShelfIndex
This object is used as to specify the agent shelf that MEP was previously in.
columnUnsigned32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.56
wwpLeosCfmRemoteMEPPreviousModuleIndex
This object is used as to specify the agent module that MEP was previously in. Index = 255 is reserved for Lag ports and this this object cannot be set to 255 in this table.
columnUnsigned32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.57
wwpLeosCfmRemoteMEPLastPortStatus
This object is used as to specify the remote MEP last port status.
columnEnumeration.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.58
wwpLeosCfmRemoteMEPLastInterfaceStatus
This object is used as to specify the remote MEP interface status.
columnEnumeration.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.59
wwpLeosCfmRemoteMEPKLastMacStatus
This object is used to specify the last MAC status received.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.6
wwpLeosCfmRemoteMEPLastSeqNum
This object is used to show the tbd.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.60
wwpLeosCfmRemoteMEPCCMSeqErrors
This object is used to show the number of MEP CCM frames sequence errors.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.61
wwpLeosCfmRemoteMEPCCMLevel
This object is used as to specify the CCM level.
columnInteger32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.62
wwpLeosCfmRemoteMEPFailureFlag
This object is used to specify the Remote MEP failure flag.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.7
wwpLeosCfmRemoteMEPCCMErrorFlag
This object is used to specify the MEP CCM error flag.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.8
wwpLeosCfmRemoteMEPRDIErrorFlag
This object is used to specify the MEP RDI error flag.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.9