wwpLeosCfmRemoteMEPMacAddr

WWP-LEOS-CFM-MIB · .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.5
MIB view Table view

Object

column r/w SNMPv2-TCMacAddress 
This object is used to specify the MAC address of the remote MEP.

Context

MIB
WWP-LEOS-CFM-MIB
OID
.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.5
Type
column
Access
readwrite
Status
current
Parent
wwpLeosCfmRemoteMEPEntry
Table
wwpLeosCfmRemoteMEPTable
Siblings
43

Syntax

SNMPv2-TCMacAddress
Source
SNMPv2-TCMacAddress
Base type
OctetString

Values & Constraints

Type Constraints
range: 6

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
wwpLeosCfmRemoteMEPID
This object is used as index in the table and is used to specify the MEPID.
columnUnsigned32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.1
wwpLeosCfmRemoteMEPNumCCMRx
This object is used to show the number of MEP CCM frames received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.10
wwpLeosCfmRemoteMEPNumDMMSent
The number of DMM frames sent.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.11
wwpLeosCfmRemoteMEPDelay
This object is used to show the average Delay in microseconds during the last Delay Measurement test.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.12
wwpLeosCfmRemoteMEPJitter
This object is used to show the average Jitter in microseconds during the last Delay Measurement test.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.13
wwpLeosCfmRemoteMEPNumLMMSent
This object is used to show the number of LMM frames sent.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.14
wwpLeosCfmRemoteMEPFrameLossNear
This object is used to show the near side Frame Loss during the last Frame Loss Measurement test.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.15
wwpLeosCfmRemoteMEPFrameLossFar
This object is used to show the far side Frame Loss during the last Frame Loss Measurement test.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.16
wwpLeosCfmRemoteMEPNumLMRReceived
This object is used to show the number of LMR frames received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.17
wwpLeosCfmRemoteMEPNumCCMLost
This object is used to show the number of MEP CCM frames lost, as calculated by watching for CCM sequence errors.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.18
wwpLeosCfmRemoteMEPNumDMRReceived
This object is used to show the number of DMR frames received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.19
wwpLeosCfmRemoteMEPAdminState
The administrative state of the Remote MEP State Machine.
columnEnumeration.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.2
wwpLeosCfmRemoteMEPHoldState deprecated
This object is used to set the remote MEP Hold State
columnEnumeration.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.20
wwpLeosCfmRemoteMEPRowStatus
This object is used to create entries in remote mep table
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.21
wwpLeosCfmRemoteMEPCCMComment
This mib object contains the CCM Comment, if available, that was sent by the remote Ciena device.
columnOctetString.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.22
wwpLeosCfmRemoteMEPBadSequence
This mib object contains the number of LMR frames received with bad sequence number, for a given service and remote mep.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.23
wwpLeosCfmRemoteMEPMinDelay
The minimum Delay in microseconds during the last Delay Measurement test.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.24
wwpLeosCfmRemoteMEPMaxDelay
The maximum Delay in microseconds during the last Delay Measurement test.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.25
wwpLeosCfmRemoteMEPMinJitter
The minimum jitter in microseconds during the last Delay Measurement test.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.26
wwpLeosCfmRemoteMEPMaxJitter
The maximum jitter in microseconds during the last Delay Measurement test.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.27
wwpLeosCfmRemoteCfmMEPHoldState
Hold-state for the remote-mep entry.
columnEnumeration.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.28
wwpLeosCfmRemoteMEPServiceClear
Setting this object to true causes the remote MEP for this service to be re-initialized .
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.29
wwpLeosCfmRemoteMEPOperState
The operational state of the Remote MEP State Machine. disabled represents that remote mep is admin disabled. enabled represents that remote mep is operationally enabled hold repr…
columnEnumeration.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.3
wwpLeosCfmRemoteMEPServiceStatisticsClear
Setting this object to true resets the statistics for the remote MEP for this service.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.30
wwpLeosCfmRemoteMEPTime
This object is used to specify the time at which the Remote MEP State Machine last entered RMEP_FAILED or RMEP_OK states.
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.4
wwpLeosCfmRemoteMEPAccelerated
Specifies if the remote-mep is monitored in the hardware.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.49
wwpLeosCfmRemoteMEPSubPortName
The object indicates the unique index for the module.
columnOctetString.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.50
wwpLeosCfmRemoteMEPServiceName
This object is used to specify the Service name.
columnOctetString.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.51
wwpLeosCfmRemoteMEPBayIndex
This object is used as to specify the agent bay that MEP is in.
columnUnsigned32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.52
wwpLeosCfmRemoteMEPShelfIndex
This object is used as to specify the agent shelf that MEP is in.
columnUnsigned32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.53
wwpLeosCfmRemoteMEPModuleIndex
This object is used as to specify the agent module that MEP is in. Index = 255 is reserved for Lag ports and this this object cannot be set to 255 in this table.
columnUnsigned32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.54
wwpLeosCfmRemoteMEPPreviousBayIndex
This object is used as to specify the agent bay that MEP was previously in.
columnUnsigned32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.55
wwpLeosCfmRemoteMEPPreviousShelfIndex
This object is used as to specify the agent shelf that MEP was previously in.
columnUnsigned32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.56
wwpLeosCfmRemoteMEPPreviousModuleIndex
This object is used as to specify the agent module that MEP was previously in. Index = 255 is reserved for Lag ports and this this object cannot be set to 255 in this table.
columnUnsigned32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.57
wwpLeosCfmRemoteMEPLastPortStatus
This object is used as to specify the remote MEP last port status.
columnEnumeration.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.58
wwpLeosCfmRemoteMEPLastInterfaceStatus
This object is used as to specify the remote MEP interface status.
columnEnumeration.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.59
wwpLeosCfmRemoteMEPKLastMacStatus
This object is used to specify the last MAC status received.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.6
wwpLeosCfmRemoteMEPLastSeqNum
This object is used to show the tbd.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.60
wwpLeosCfmRemoteMEPCCMSeqErrors
This object is used to show the number of MEP CCM frames sequence errors.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.61
wwpLeosCfmRemoteMEPCCMLevel
This object is used as to specify the CCM level.
columnInteger32.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.62
wwpLeosCfmRemoteMEPFailureFlag
This object is used to specify the Remote MEP failure flag.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.7
wwpLeosCfmRemoteMEPCCMErrorFlag
This object is used to specify the MEP CCM error flag.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.8
wwpLeosCfmRemoteMEPRDIErrorFlag
This object is used to specify the MEP RDI error flag.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.9