wwpLeosCfmRemoteMEPLastInterfaceStatus
WWP-LEOS-CFM-MIB ·
.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.59
Object
column
Enumeration
This object is used as to specify the remote MEP interface status.
Context
- MIB
- WWP-LEOS-CFM-MIB
- OID
.1.3.6.1.4.1.6141.2.60.35.1.8.1.1.59- Type
- column
- Access
- readonly
- Status
- current
- Parent
- wwpLeosCfmRemoteMEPEntry
- Table
- wwpLeosCfmRemoteMEPTable
- Siblings
- 43
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | none |
2 | up |
3 | down |
4 | testing |
5 | dormant |
6 | lowerLayerDown |
7 | notPresent |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wwpLeosCfmRemoteMEPID This object is used as index in the table and is used to specify the MEPID. | column | Unsigned32 | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.1 |
| wwpLeosCfmRemoteMEPNumCCMRx This object is used to show the number of MEP CCM frames received. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.10 |
| wwpLeosCfmRemoteMEPNumDMMSent The number of DMM frames sent. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.11 |
| wwpLeosCfmRemoteMEPDelay This object is used to show the average Delay in microseconds
during the last Delay Measurement test. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.12 |
| wwpLeosCfmRemoteMEPJitter This object is used to show the average Jitter in microseconds
during the last Delay Measurement test. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.13 |
| wwpLeosCfmRemoteMEPNumLMMSent This object is used to show the number of LMM frames sent. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.14 |
| wwpLeosCfmRemoteMEPFrameLossNear This object is used to show the near side Frame Loss
during the last Frame Loss Measurement test. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.15 |
| wwpLeosCfmRemoteMEPFrameLossFar This object is used to show the far side Frame Loss
during the last Frame Loss Measurement test. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.16 |
| wwpLeosCfmRemoteMEPNumLMRReceived This object is used to show the number of LMR frames received. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.17 |
| wwpLeosCfmRemoteMEPNumCCMLost This object is used to show the number of MEP CCM frames lost,
as calculated by watching for CCM sequence errors. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.18 |
| wwpLeosCfmRemoteMEPNumDMRReceived This object is used to show the number of DMR frames received. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.19 |
| wwpLeosCfmRemoteMEPAdminState The administrative state of the Remote MEP State Machine. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.2 |
| wwpLeosCfmRemoteMEPHoldState deprecated This object is used to set the remote MEP Hold State | column | Enumeration | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.20 |
| wwpLeosCfmRemoteMEPRowStatus This object is used to create entries in remote mep table | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.21 |
| wwpLeosCfmRemoteMEPCCMComment This mib object contains the CCM Comment, if available,
that was sent by the remote Ciena device. | column | OctetString | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.22 |
| wwpLeosCfmRemoteMEPBadSequence This mib object contains the number of LMR frames received
with bad sequence number, for a given service and remote mep. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.23 |
| wwpLeosCfmRemoteMEPMinDelay The minimum Delay in microseconds
during the last Delay Measurement test. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.24 |
| wwpLeosCfmRemoteMEPMaxDelay The maximum Delay in microseconds
during the last Delay Measurement test. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.25 |
| wwpLeosCfmRemoteMEPMinJitter The minimum jitter in microseconds
during the last Delay Measurement test. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.26 |
| wwpLeosCfmRemoteMEPMaxJitter The maximum jitter in microseconds
during the last Delay Measurement test. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.27 |
| wwpLeosCfmRemoteCfmMEPHoldState Hold-state for the remote-mep entry. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.28 |
| wwpLeosCfmRemoteMEPServiceClear Setting this object to true causes the remote MEP for this service
to be re-initialized . | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.29 |
| wwpLeosCfmRemoteMEPOperState The operational state of the Remote MEP State Machine.
disabled represents that remote mep is admin disabled.
enabled represents that remote mep is operationally enabled
hold repr… | column | Enumeration | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.3 |
| wwpLeosCfmRemoteMEPServiceStatisticsClear Setting this object to true resets the statistics for the remote MEP
for this service. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.30 |
| wwpLeosCfmRemoteMEPTime This object is used to specify the time at which the Remote MEP State Machine last
entered RMEP_FAILED or RMEP_OK states. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.4 |
| wwpLeosCfmRemoteMEPAccelerated Specifies if the remote-mep is monitored in the hardware. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.49 |
| wwpLeosCfmRemoteMEPMacAddr This object is used to specify the MAC address of the remote MEP. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.5 |
| wwpLeosCfmRemoteMEPSubPortName The object indicates the unique index for the module. | column | OctetString | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.50 |
| wwpLeosCfmRemoteMEPServiceName This object is used to specify the Service name. | column | OctetString | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.51 |
| wwpLeosCfmRemoteMEPBayIndex This object is used as to specify the agent bay that MEP is in. | column | Unsigned32 | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.52 |
| wwpLeosCfmRemoteMEPShelfIndex This object is used as to specify the agent shelf that MEP is in. | column | Unsigned32 | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.53 |
| wwpLeosCfmRemoteMEPModuleIndex This object is used as to specify the agent module that MEP is in.
Index = 255 is reserved for Lag ports and this this object cannot be set to 255
in this table. | column | Unsigned32 | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.54 |
| wwpLeosCfmRemoteMEPPreviousBayIndex This object is used as to specify the agent bay that MEP was previously in. | column | Unsigned32 | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.55 |
| wwpLeosCfmRemoteMEPPreviousShelfIndex This object is used as to specify the agent shelf that MEP was previously in. | column | Unsigned32 | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.56 |
| wwpLeosCfmRemoteMEPPreviousModuleIndex This object is used as to specify the agent module that MEP was previously in.
Index = 255 is reserved for Lag ports and this this object cannot be set to 255
in this table. | column | Unsigned32 | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.57 |
| wwpLeosCfmRemoteMEPLastPortStatus This object is used as to specify the remote MEP last port status. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.58 |
| wwpLeosCfmRemoteMEPKLastMacStatus This object is used to specify the last MAC status received. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.6 |
| wwpLeosCfmRemoteMEPLastSeqNum This object is used to show the tbd. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.60 |
| wwpLeosCfmRemoteMEPCCMSeqErrors This object is used to show the number of MEP CCM frames sequence errors. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.61 |
| wwpLeosCfmRemoteMEPCCMLevel This object is used as to specify the CCM level. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.62 |
| wwpLeosCfmRemoteMEPFailureFlag This object is used to specify the Remote MEP failure flag. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.7 |
| wwpLeosCfmRemoteMEPCCMErrorFlag This object is used to specify the MEP CCM error flag. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.8 |
| wwpLeosCfmRemoteMEPRDIErrorFlag This object is used to specify the MEP RDI error flag. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.9 |