wwpLeosCfmMEPSubPortName

WWP-LEOS-CFM-MIB · .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.51
MIB view Table view

Object

column OctetString 
This object represents the sub-port name assigned to the given service and port.

Context

MIB
WWP-LEOS-CFM-MIB
OID
.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.51
Type
column
Access
readonly
Status
current
Parent
wwpLeosCfmMEPEntry
Table
wwpLeosCfmMEPTable
Siblings
47

Syntax

OctetString

Values & Constraints

Object Constraints
range: 0-31

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
wwpLeosCfmMEPPort
This object is used as index in the table and is used to specify the port id.
columnInteger32.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.1
wwpLeosCfmMEPNextLbmSeqNumber
This object specifies the next lbm sequence number received on the given service and port.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.10
wwpLeosCfmMEPRxValidInOrderLoopbackReply
The total valid in order loopback replies received on the given service and port.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.11
wwpLeosCfmMEPRxValidOutOrderLoopbackReply
This object specifies the total valid out of order loopback replies received on the given service and port.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.12
wwpLeosCfmMEPNextLTMSeqNumber
This object specifies the next LTM serquence number received on the given service and port.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.13
wwpLeosCfmMEPNumLoopbackRepliesTxmt
This object specifies the flags total loopback replies transmitted on the given service and port.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.14
wwpLeosCfmMEPNumLTMReceived
This object specifies the total LTM messages received on the given service and port.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.15
wwpLeosCfmMEPNumLTMTxmt
The total LTM transmitted on the given service and port.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.16
wwpLeosCfmMEPNumCCMTxmt
This object specifies the total CCM messages transmitted on the given service and port.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.17
wwpLeosCfmMEPRowStatus
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To d…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.18
wwpLeosCfmMEPNumDMMSent
This object specifies the total delay measurement messages transmitted on the given service and port.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.19
wwpLeosCfmMEPAdminState
This object is used to specify the admin state of CFM MEP.
columnEnumeration.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.2
wwpLeosCfmMEPDMMDelay
This object specifies the average delay in microseconds measured during the last DMM performance test on the given service and port.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.20
wwpLeosCfmMEPDMMJitter
This object specifies the average jitter in microseconds measured during the last DMM performance test on the given service and port.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.21
wwpLeosCfmMEPNumLMMSent
The total frame loss measurement messages transmitted during the last test performed on the given service and port.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.22
wwpLeosCfmMEPLMMFrameLossNear
This object specifies the number of lost frames on the near side measured during the last LMM performance test on the given service and port.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.23
wwpLeosCfmMEPLMMFrameLossFar
This object specifies the number of lost frames on the far side measured during the last LMM performance test on the given service and port.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.24
wwpLeosCfmMEPNumLMRReceived
This object specifies the total number of frame loss measurement replies received during the last test performed on the given service and port. If this count is zero, the near an…
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.25
wwpLeosCfmMEPNumDMRReceived
This object specifies the total number of delay measurement replies received during the last test performed on the given service and port. If this count is not equal to the numbe…
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.26
wwpLeosCfmMEPDMMMinDelay
The minimum delay in microseconds measured during the last DMM performance test on the given service and port.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.27
wwpLeosCfmMEPDMMMaxDelay
The maximum delay in microseconds measured during the last DMM performance test on the given service and port.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.28
wwpLeosCfmMEPDMMMinJitter
The minimum jitter in microseconds measured during the last DMM performance test on the given service and port.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.29
wwpLeosCfmMEPOperState obsolete
This object is obsolete and should not be used.
columnEnumeration.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.3
wwpLeosCfmMEPDMMMaxJitter
The maximum jitter in microseconds measured during the last DMM performance test on the given service and port.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.30
wwpLeosCfmMEPDirection
This object is used to specify the MEP direction of the service. This object can only be set if wwpLeosCfmServiceIndex is of type vlan.
columnEnumeration.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.4
wwpLeosCfmMEPCCMState
This object specifies the CCM transmission for the service specified by wwpLeosCfmServiceType.
columnEnumeration.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.5
wwpLeosCfmMEPServiceName
This object is used to specify the service name assigned to this port.
columnOctetString.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.50
wwpLeosCfmMEPVsPbtName
This object represents the virtual switch or Pbt tunnel assigned to the given service and port.
columnOctetString.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.52
wwpLeosCfmMEPLogicalPortName
This object represents the logical port name assigned to the given service and port.
columnOctetString.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.53
wwpLeosCfmMEPSubPortIndex
This object is used to specify the CFM sub-port index.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.54
wwpLeosCfmMEPEncapsulation
This object is used to specify the encapsulation applied to the service and port.
columnEnumeration.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.55
wwpLeosCfmMEPLeadPortBayIndex
This object is used as to specify the agent bay that MEP is in.
columnUnsigned32.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.56
wwpLeosCfmMEPLeadPortShelfIndex
This object is used as to specify the agent shelf that MEP is in.
columnUnsigned32.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.57
wwpLeosCfmMEPLeadPortModuleIndex
This object is used as to specify the agent module that MEP is in. Index = 255 is reserved for Lag ports and this this object cannot be set to 255 in this table.
columnUnsigned32.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.58
wwpLeosCfmMEPPBTBvid
This object specifies the BVID assigned to the given service and port.
columnUnsigned32.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.59
wwpLeosCfmMEPCCMPriority
This object specified the priority of CCM messages transmitted.
columnInteger32.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.6
wwpLeosCfmMEPPBTEtype
This object specifies the E-type assigned to the given service and port.
columnUnsigned32.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.60
wwpLeosCfmMEPNumLbmTxmt
This object specifies the total loopback messages transmitted on the given service and port.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.61
wwpLeosCfmMEPNumLbmReceived
This object specifies the total loopback messages received on the given service and port.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.62
wwpLeosCfmMEPNumLoopbackRepliesReceived
This object specifies the total loopback replies received on the given service and port.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.63
wwpLeosCfmMEPNumLTRepliesTxmt
This object specifies the total link trace replies transmitted on the given service and port.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.64
wwpLeosCfmMEPNumLTRepliesReceived
This object specifies the total link trace replies received on the given service and port.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.65
wwpLeosCfmMEPNumUnexpectedLTRepliesReceived
This object specifies the total unexpected link trace replies received on the given service and port.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.66
wwpLeosCfmMEPNumCCMReceived
This object specifies the total CCM messages received on the given service and port.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.67
wwpLeosCfmMEPLTMPriority obsolete
This object specifies the priority received on the given service and port.
columnInteger32.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.7
wwpLeosCfmMEPId
This object specifies the mep id for the given service and port.
columnUnsigned32.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.8
wwpLeosCfmMEPMacAddr
This object specifies the mac address received on the given service and port..
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.9