wwpLeosCfmMEPRxValidInOrderLoopbackReply
WWP-LEOS-CFM-MIB ·
.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.11
Object
column
SNMPv2-SMICounter32
The total valid in order loopback replies received on the given service and port.
Context
- MIB
- WWP-LEOS-CFM-MIB
- OID
.1.3.6.1.4.1.6141.2.60.35.1.7.1.1.11- Type
- column
- Access
- readonly
- Status
- current
- Parent
- wwpLeosCfmMEPEntry
- Table
- wwpLeosCfmMEPTable
- Siblings
- 47
Syntax
SNMPv2-SMICounter32
- Source
- SNMPv2-SMICounter32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wwpLeosCfmMEPPort This object is used as index in the table and is used to specify the port id. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.1 |
| wwpLeosCfmMEPNextLbmSeqNumber This object specifies the next lbm sequence number received on the given service and port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.10 |
| wwpLeosCfmMEPRxValidOutOrderLoopbackReply This object specifies the total valid out of order loopback replies received on the given service and port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.12 |
| wwpLeosCfmMEPNextLTMSeqNumber This object specifies the next LTM serquence number received on the given service and port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.13 |
| wwpLeosCfmMEPNumLoopbackRepliesTxmt This object specifies the flags total loopback replies transmitted on the given service and port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.14 |
| wwpLeosCfmMEPNumLTMReceived This object specifies the total LTM messages received on the given service and port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.15 |
| wwpLeosCfmMEPNumLTMTxmt The total LTM transmitted on the given service and port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.16 |
| wwpLeosCfmMEPNumCCMTxmt This object specifies the total CCM messages transmitted on the given service and port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.17 |
| wwpLeosCfmMEPRowStatus Used to manage the creation and deletion of the
conceptual rows in this table.
To create a row in this table, a manager must
set this object to 'createAndGo'. To d… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.18 |
| wwpLeosCfmMEPNumDMMSent This object specifies the total delay measurement messages
transmitted on the given service and port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.19 |
| wwpLeosCfmMEPAdminState This object is used to specify the admin state of CFM MEP. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.2 |
| wwpLeosCfmMEPDMMDelay This object specifies the average delay in microseconds
measured during the last DMM performance test on the given service and port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.20 |
| wwpLeosCfmMEPDMMJitter This object specifies the average jitter in microseconds
measured during the last DMM performance test on the given service and port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.21 |
| wwpLeosCfmMEPNumLMMSent The total frame loss measurement messages transmitted
during the last test performed on the given service and port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.22 |
| wwpLeosCfmMEPLMMFrameLossNear This object specifies the number of lost frames on the near side
measured during the last LMM performance test on the given service and port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.23 |
| wwpLeosCfmMEPLMMFrameLossFar This object specifies the number of lost frames on the far side
measured during the last LMM performance test on the given service and port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.24 |
| wwpLeosCfmMEPNumLMRReceived This object specifies the total number of frame loss measurement
replies received during the last test performed on the given service
and port. If this count is zero, the near an… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.25 |
| wwpLeosCfmMEPNumDMRReceived This object specifies the total number of delay measurement
replies received during the last test performed on the given service
and port. If this count is not equal to the numbe… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.26 |
| wwpLeosCfmMEPDMMMinDelay The minimum delay in microseconds measured during
the last DMM performance test on the given service and port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.27 |
| wwpLeosCfmMEPDMMMaxDelay The maximum delay in microseconds measured during
the last DMM performance test on the given service and port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.28 |
| wwpLeosCfmMEPDMMMinJitter The minimum jitter in microseconds measured during
the last DMM performance test on the given service and port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.29 |
| wwpLeosCfmMEPOperState obsolete This object is obsolete and should not be used. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.3 |
| wwpLeosCfmMEPDMMMaxJitter The maximum jitter in microseconds measured during
the last DMM performance test on the given service and port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.30 |
| wwpLeosCfmMEPDirection This object is used to specify the MEP direction of the service.
This object can only be set if wwpLeosCfmServiceIndex is of type vlan. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.4 |
| wwpLeosCfmMEPCCMState This object specifies the CCM transmission for the service specified by wwpLeosCfmServiceType. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.5 |
| wwpLeosCfmMEPServiceName This object is used to specify the service name assigned to this port. | column | OctetString | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.50 |
| wwpLeosCfmMEPSubPortName This object represents the sub-port name assigned to the given service and port. | column | OctetString | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.51 |
| wwpLeosCfmMEPVsPbtName This object represents the virtual switch or Pbt tunnel assigned to the given service and port. | column | OctetString | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.52 |
| wwpLeosCfmMEPLogicalPortName This object represents the logical port name assigned to the given service and port. | column | OctetString | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.53 |
| wwpLeosCfmMEPSubPortIndex This object is used to specify the CFM sub-port index. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.54 |
| wwpLeosCfmMEPEncapsulation This object is used to specify the encapsulation applied to the service and port. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.55 |
| wwpLeosCfmMEPLeadPortBayIndex This object is used as to specify the agent bay that MEP is in. | column | Unsigned32 | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.56 |
| wwpLeosCfmMEPLeadPortShelfIndex This object is used as to specify the agent shelf that MEP is in. | column | Unsigned32 | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.57 |
| wwpLeosCfmMEPLeadPortModuleIndex This object is used as to specify the agent module that MEP is in.
Index = 255 is reserved for Lag ports and this this object cannot be set to 255
in this table. | column | Unsigned32 | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.58 |
| wwpLeosCfmMEPPBTBvid This object specifies the BVID assigned to the given service and port. | column | Unsigned32 | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.59 |
| wwpLeosCfmMEPCCMPriority This object specified the priority of CCM messages transmitted. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.6 |
| wwpLeosCfmMEPPBTEtype This object specifies the E-type assigned to the given service and port. | column | Unsigned32 | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.60 |
| wwpLeosCfmMEPNumLbmTxmt This object specifies the total loopback messages transmitted on the
given service and port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.61 |
| wwpLeosCfmMEPNumLbmReceived This object specifies the total loopback messages received on the
given service and port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.62 |
| wwpLeosCfmMEPNumLoopbackRepliesReceived This object specifies the total loopback replies received on the
given service and port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.63 |
| wwpLeosCfmMEPNumLTRepliesTxmt This object specifies the total link trace replies transmitted on the
given service and port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.64 |
| wwpLeosCfmMEPNumLTRepliesReceived This object specifies the total link trace replies received on the
given service and port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.65 |
| wwpLeosCfmMEPNumUnexpectedLTRepliesReceived This object specifies the total unexpected link trace replies received on the
given service and port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.66 |
| wwpLeosCfmMEPNumCCMReceived This object specifies the total CCM messages received on the given service and port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.67 |
| wwpLeosCfmMEPLTMPriority obsolete This object specifies the priority received on the given service and port. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.7 |
| wwpLeosCfmMEPId This object specifies the mep id for the given service and port. | column | Unsigned32 | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.8 |
| wwpLeosCfmMEPMacAddr This object specifies the mac address received on the given service and port.. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.9 |