wwpLeosCfmExtDelayMsgAction
WWP-LEOS-CFM-MIB ·
.1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.43
Object
column
r/w
SendState
This object represents the action for the message (send, clear or cancel) If set to send(1) and if wwpLeosCfmExtDelayMsgTargetMacAddr is specified then loopbackMsg is sent to remote Mac. If set to send(1) and if wwpLeosCfmExtDelayMsgTargetMEPID is specified then loopbackMsg is sent to remote mepid. If set to clear(2) will clear mep statistics for given service and mepid. If set to cancel(3) and if wwpLeosCfmExtDelayMsgTargetMacAddr is specified then it will cancel sending Delay messages to remoteMac. If set to cancel(3) and if wwpLeosCfmExtDelayMsgTargetMEPID is specified then it will cancel sending Delay messages to remoteMEPID.
Context
- MIB
- WWP-LEOS-CFM-MIB
- OID
.1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.43- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- wwpLeosCfmExtDelayMsgEntry
- Table
- wwpLeosCfmExtDelayMsgTable
- Siblings
- 11
Syntax
SendState
- Source
- SendState
- Base type
Enumeration
Values & Constraints
Type Values
1 | send |
2 | clear |
3 | cancel |
99 | none |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wwpLeosCfmExtDelayMsgLocalMEPId This object is used to specify the local MEPId. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.1 |
| wwpLeosCfmExtDelayMsgTargetMEPID This object is used to specify the MEPID.
This object should only be set if wwpLeosCfmExtDelayMsgTargetMacAddr is not specified else
error will be returned. | column | Unsigned32 | .1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.2 |
| wwpLeosCfmExtDelayMsgTargetMacAddr This object is used to specify the MacAddress to be used when sending link LoopbackMsg.
This object should only be set if wwpLeosCfmExtDelayMsgTargetMEPID is not specified else
e… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.3 |
| wwpLeosCfmExtDelayMsgCount This object is used to specify the DelayMeasurementMsg count to be used
when sending link DelayMeasurementMsg. Counts between 2 and 600 are valid. The system
default count will b… | column | Integer32 | .1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.4 |
| wwpLeosCfmExtDelayMsgDelayThreshold Represents the fault Threshold for the average delay, specified
in microseconds. A value of -1 disables the generatation of faults,
0 or greater will be compared to the average d… | column | Integer32 | .1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.41 |
| wwpLeosCfmExtDelayMsgJitterThreshold Represents the fault threshold value for the average Jitter, specified
in microseconds. A value of -1 disables the generation of faults,
0 or greater will be compared to the aver… | column | Integer32 | .1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.42 |
| wwpLeosCfmExtDelayMsgMaxDelayThreshold Represents the Threshold for the maximum Delay, specified
in microseconds. A value of -1 disables the generatation of faults,
0 or greater will be compared to the maximum delay r… | column | Integer32 | .1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.44 |
| wwpLeosCfmExtDelayMsgMaxJitterThreshold Represents the threshold value for the maximum Jitter, specified
in microseconds. A value of -1 disables the generatation of faults,
0 or greater will be compared to the maximum … | column | Integer32 | .1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.45 |
| wwpLeosCfmExtDelayMsgPriority This object is used to specify the DelayMeasurementMsg priority to be
used when sending link DelayMeasurementMsg. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.5 |
| wwpLeosCfmExtDelayMsgRepeat Used to make the Delay Measurement test a repeating test. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.8 |
| wwpLeosCfmExtDelayMsgRepeatCount The repeat time in minutes for the Delay Measurement test.
If zero is specified, the test runs continuously. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.9 |