wrsPortStatusSfpRxPower
WR-SWITCH-MIB ·
.1.3.6.1.4.1.96.100.7.6.1.21
Object
column
SNMPv2-SMIInteger32
Measured RX output power in uW reported by SFP. According to SFF-8472, accuracy of this value must be better than 3dB%
Context
- MIB
- WR-SWITCH-MIB
- OID
.1.3.6.1.4.1.96.100.7.6.1.21- Type
- column
- Access
- readonly
- Status
- current
- Parent
- wrsPortStatusEntry
- Table
- wrsPortStatusTable
- Siblings
- 22
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wrsPortStatusIndex Index for wrsPortStatusTable | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.96.100.7.6.1.1 |
| wrsPortStatusSfpInDB Whether the SFP is in data base or not | column | Enumeration | .1.3.6.1.4.1.96.100.7.6.1.10 |
| wrsPortStatusSfpGbE Whether the SFP is 1 GbE | column | Enumeration | .1.3.6.1.4.1.96.100.7.6.1.11 |
| wrsPortStatusSfpError Problem with SFP configuration. Port has to be always 1GbE. Port has to be in data base as long as support WR. | column | Enumeration | .1.3.6.1.4.1.96.100.7.6.1.12 |
| wrsPortStatusPtpTxFrames Number of transmitted PTP frames per port (for all PPSI instances
running on particular port | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.96.100.7.6.1.13 |
| wrsPortStatusPtpRxFrames Number of received PTP frames per port (for all PPSI instances
running on particular port | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.96.100.7.6.1.14 |
| wrsPortStatusMonitor If disable, SNMP will not generate any errors for this port. | column | Enumeration | .1.3.6.1.4.1.96.100.7.6.1.15 |
| wrsPortStatusSfpDom SFP plugged into a given port has extra monitoring (DOM) capabilities. | column | Enumeration | .1.3.6.1.4.1.96.100.7.6.1.16 |
| wrsPortStatusSfpTemp Temperature reported by SFP. According to SFF-8472, accuracy of
this value must be better than 3 degrees Celsius | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.96.100.7.6.1.17 |
| wrsPortStatusSfpVcc Internally measured transceiver supply voltage reported by SFP.
According to SFF-8472, accuracy of this value must be better than 3% | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.96.100.7.6.1.18 |
| wrsPortStatusSfpTxBias Measured TX bias current in uA reported by SFP.
According to SFF-8472, accuracy of this value must be better than 10% | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.96.100.7.6.1.19 |
| wrsPortStatusPortName Name of port | column | OctetString | .1.3.6.1.4.1.96.100.7.6.1.2 |
| wrsPortStatusSfpTxPower Measured TX output power in uW reported by SFP.
According to SFF-8472, accuracy of this value must be better than 3dB% | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.96.100.7.6.1.20 |
| wrsPortStatusT24p T2/T4 phase transition point used for Rx timestamps correction | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.96.100.7.6.1.22 |
| wrsPortStatusT24pValid Validity of wrsPortStatusT24p | column | Enumeration | .1.3.6.1.4.1.96.100.7.6.1.23 |
| wrsPortStatusLink Whether the link is up or down | column | Enumeration | .1.3.6.1.4.1.96.100.7.6.1.3 |
| wrsPortStatusConfiguredMode Whether the port is configured as master, slave, non-wr or auto | column | Enumeration | .1.3.6.1.4.1.96.100.7.6.1.4 |
| wrsPortStatusLocked Whether the peers are locked or not | column | Enumeration | .1.3.6.1.4.1.96.100.7.6.1.5 |
| wrsPortStatusPeer obsolete the ClockID of the peer, if available. Or 0 | column | OctetString | .1.3.6.1.4.1.96.100.7.6.1.6 |
| wrsPortStatusSfpVN Vendor Name of SFP | column | OctetString | .1.3.6.1.4.1.96.100.7.6.1.7 |
| wrsPortStatusSfpPN Part Number of SFP | column | OctetString | .1.3.6.1.4.1.96.100.7.6.1.8 |
| wrsPortStatusSfpVS Vendor serial number of SFP | column | OctetString | .1.3.6.1.4.1.96.100.7.6.1.9 |