wrsFwUpdateStatus
WR-SWITCH-MIB ·
.1.3.6.1.4.1.96.100.7.1.2.16
Object
scalar
Enumeration
Status of the last firmware update. ok - Update successful checksumError - firmware checksum error
Context
- MIB
- WR-SWITCH-MIB
- OID
.1.3.6.1.4.1.96.100.7.1.2.16- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- wrsBootStatusGroup
- Siblings
- 21
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | na |
1 | ok |
2 | checksumError |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wrsBootCnt Number of switch's boots since power-on | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.96.100.7.1.2.1 |
| wrsBootHwinfoReadout Result of hwinfo readout
ok - hwinfo readout successful
error - hwinfo readout failed
errorMinor - cannot read status file, problem is probably somewhere else
warning - no hwinfo … | scalar | Enumeration | .1.3.6.1.4.1.96.100.7.1.2.10 |
| wrsBootLoadFPGA Result of loading FPGA
ok - FPGA loaded successfully
error - loading failed
errorMinor - cannot read status file, problem is probably somewhere else
fileNotFound - file to be load… | scalar | Enumeration | .1.3.6.1.4.1.96.100.7.1.2.11 |
| wrsBootLoadLM32 Result of loading LM32
ok - LM32 loaded successfully
error - loading failed
errorMinor - cannot read status file, problem is probably somewhere else
fileNotFound - file to be load… | scalar | Enumeration | .1.3.6.1.4.1.96.100.7.1.2.12 |
| wrsBootKernelModulesMissing Checking if all desired kernel modules are loaded.
allKernelModulesPresent - all modules loaded
other numbers represent number of modules not loaded
other errors (like unable to o… | scalar | Enumeration | .1.3.6.1.4.1.96.100.7.1.2.13 |
| wrsBootUserspaceDaemonsMissing Checking if all desired daemons are running.
allDaemonsPresent - all daemons running
other numbers represent number of daemons not running
other errors (can be: unable to run ps c… | scalar | Enumeration | .1.3.6.1.4.1.96.100.7.1.2.14 |
| wrsGwWatchdogTimeouts Number of times the watchdog has restarted the HDL module responsible
for the Ethernet switching process. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.96.100.7.1.2.15 |
| wrsCustomBootScriptSource Source of the custom boot script
local - used custom boot script was stored on the switch
remote - custom boot script was retrieved from the network; check the
wrsCustomB… | scalar | Enumeration | .1.3.6.1.4.1.96.100.7.1.2.17 |
| wrsCustomBootScriptSourceUrl Url to the custom boot script | scalar | OctetString | .1.3.6.1.4.1.96.100.7.1.2.18 |
| wrsCustomBootScriptStatus The result of execution of the custom boot script
ok - custom boot script executed successfully
failed - custom boot script failed during execution
wrongSrc - no valid source of t… | scalar | Enumeration | .1.3.6.1.4.1.96.100.7.1.2.19 |
| wrsRebootCnt The number of soft reboots. This is incremented by the
reboot system call. A healthy system should feature one
soft-reboot less than total boots. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.96.100.7.1.2.2 |
| wrsAuxClkSetStatus Result of setting up auxclk on connector clk2
ok - successful set pu of the auxclk
failed - error while setting up the auxclk
disabled - the setting up of the auxclk disabled in d… | scalar | Enumeration | .1.3.6.1.4.1.96.100.7.1.2.20 |
| wrsThrottlingSetStatus Result of setting up a limit on the Rx bandwidth of the traffic that
goes from WR ports to Linux.
ok - successful set up of the throttling
failed - error while setting up the thro… | scalar | Enumeration | .1.3.6.1.4.1.96.100.7.1.2.21 |
| wrsVlansSetStatus Result of setting up VLANs
ok - successful set up of VLANs
failed - error while setting up VLANs
disabled - the setting up of VLANs disabled in dot-config
error - unsuported statu… | scalar | Enumeration | .1.3.6.1.4.1.96.100.7.1.2.22 |
| wrsRestartReason Reason of last switch restart.
error(1) - unable to read restart reason or reset counters
generalReset(2) - Both VDDCORE and VDDBU rising (power-on)
wakeUpReset(3) - VDDCORE risi… | scalar | Enumeration | .1.3.6.1.4.1.96.100.7.1.2.3 |
| wrsFaultIP The fault address of the last panic. This is the instruction
pointer normally printed by the stack backtrace. The register
is zeroed at first boot and only modified within panic. | scalar | OctetString | .1.3.6.1.4.1.96.100.7.1.2.4 |
| wrsFaultLR The link register register at last panic.
This is usually the caller of the function that failed,
but it may be a local register if the failing function
saved lr to the stack and … | scalar | OctetString | .1.3.6.1.4.1.96.100.7.1.2.5 |
| wrsConfigSource Source of used dotconfig
local - used dot-config was stored on the switch
remote - dot-config retrieved from the network check the
wrsConfigSourceUrl for the path
tryDhcp… | scalar | Enumeration | .1.3.6.1.4.1.96.100.7.1.2.6 |
| wrsConfigSourceUrl Url to the dot-config | scalar | OctetString | .1.3.6.1.4.1.96.100.7.1.2.7 |
| wrsRestartReasonMonit Program's name which caused the monit to restart the switch due to too
many crashes. | scalar | OctetString | .1.3.6.1.4.1.96.100.7.1.2.8 |
| wrsBootConfigStatus Result of loading or downloading dot-config file
ok - dot-config downloaded or loaded correctly
downloadError - unable to download a file from a given source
checkError - config f… | scalar | Enumeration | .1.3.6.1.4.1.96.100.7.1.2.9 |