wlsxSuspectUnsecureAPDetected
WLSX-TRAP-MIB ·
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1150
Object
notification
This trap indicates that an access point, classified as Suspected Rogue, has been detected by a Controller. The AP is suspected to be rogue, with the supplied confidence level, because it was matched to the wired MAC address.
Context
- MIB
- WLSX-TRAP-MIB
- OID
.1.3.6.1.4.1.14823.2.3.1.11.1.2.1150- Type
- notification
- Status
- current
- Parent
- wlsxTrapDefinitionsGroup
- Siblings
- 293
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wlsxVlanLinkUp This trap indicates that a VLAN interface is up. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1000 |
| wlsxVlanLinkDown This trap indicates that a VLAN interface is down. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1001 |
| wlsxSignatureMatch This trap indicates that a signature match was detected. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1002 |
| wlsxNodeRateAnomaly This trap indicates that a node is exceeding the threshold set for
the frame type. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1003 |
| wlsxNormalTemperature This trap indicates that the Temperature has returned to
an acceptable range. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1004 |
| wlsxProcessRestart This trap indicates that the named process has been restarted. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1005 |
| wlsxFlashSpaceOK This trap which indicates that the system flash space is back
to a sufficient level. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1006 |
| wlsxMemoryUsageOK This trap which indicates that the free memory usage is back
to a sufficient level. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1007 |
| wlsxPowerSupplyOK This trap indicates that the system power supply condition have
returned to normal operation status. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1008 |
| wlsxFanOK This trap indicates that the fan has returned to normal. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1009 |
| wlsxInRangeVoltage This trap indicates that the controller Voltage is back within range. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1010 |
| wlsxCoverageHoleResolved This trap indicates that a coverage hole at location
wlsxTrapAPLocation has been resolved. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1011 |
| wlsxNSwitchIPChanged This trap indicates that the controller IP address has changed. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1012 |
| wlsxNSwitchRoleChange This trap indicates that the role of the controller IP address has
changed. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1013 |
| wlsxNUserEntryCreated This trap indicates that a new user was created. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1014 |
| wlsxNUserEntryDeleted This trap indicates that a user was deleted. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1015 |
| wlsxNUserEntryAuthenticated This trap indicates that a user is Authenticated. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1016 |
| wlsxNUserEntryDeAuthenticated This trap indicates that a user is Deauthenticated. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1017 |
| wlsxNUserAuthenticationFailed This trap indicates that a user authentication has failed. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1018 |
| wlsxNAuthServerReqTimedOut This trap indicates that the authentication server request timed out. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1019 |
| wlsxNAuthServerTimedOut This trap indicates that the authentication server timed out. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1020 |
| wlsxNAuthServerIsUp This trap indicates that an authentication server is up. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1021 |
| wlsxNAuthMaxUserEntries A trap which indicates that the user entries table is full and
cannot add any more entries. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1022 |
| wlsxNAuthMaxAclEntries A trap which indicates that the ACL Entries table is full and
cannot add any more entries. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1023 |
| wlsxNAuthMaxBWContracts A trap which indicates that the controller reached the maximum number
of configurable Bandwidth contracts. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1024 |
| wlsxNPowerSupplyFailure A trap which indicates that the power supply has failed. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1025 |
| wlsxNFanFailure A trap which indicates that the fan has failed. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1026 |
| wlsxNOutOfRangeVoltage A trap which indicates that the controller voltage is out of range. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1027 |
| wlsxNOutOfRangeTemperature A trap which indicates that the controller internal temperature is
out of range. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1028 |
| wlsxNLCInserted A Trap which indicates that a line card is inserted. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1029 |
| wlsxNSCInserted a Trap which indicates that a supervisor card is inserted. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1030 |
| wlsxNGBICInserted A Trap which indicates that a GBIC is inserted in a Line Card. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1031 |
| wlsxNProcessDied A Trap which indicates that a process has died. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1032 |
| wlsxNProcessExceedsMemoryLimits A Trap which indicates that a process is consuming Large
amounts of memory. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1033 |
| wlsxNLowOnFlashSpace A Trap which indicates that the controller is running low on flash space. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1034 |
| wlsxNLowMemory A Trap which indicates that the system free memory is low. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1035 |
| wlsxNFanTrayRemoved A Trap which indicates that a fan tray is removed. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1036 |
| wlsxNFanTrayInserted A Trap which indicates that a fan tray is inserted. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1037 |
| wlsxNLCRemoved A Trap which indicates that a Line card is removed. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1038 |
| wlsxNPowerSupplyMissing A Trap which indicates that the power supply is missing. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1039 |
| wlsxNAccessPointIsUp A Trap which indicates that an access point up. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1040 |
| wlsxNAccessPointIsDown A Trap which indicates that an access point down. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1041 |
| wlsxNCoverageHoleDetected This trap indicates that an access point at Location
wlsxTrapAPLocation has detected a Coverage Hole. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1042 |
| wlsxNChannelChanged This trap indicates that an access point at Location
wlsxTrapAPLocation has changed the channel. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1043 |
| wlsxNStationAddedToBlackList obsolete This trap indicates that the station is black listed.
**NOTE: this trap is obsoleted and replaced by
wlsxNStationAddedToDenyList | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1044 |
| wlsxNStationRemovedFromBlackList obsolete This trap indicates that the station is removed from the black list.
**NOTE: this trap is obsoleted and replaced by
wlsxNStationRemovedFromDenyList | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1045 |
| wlsxNIpSpoofingDetected A trap indicating that the controller detected IP Spoofing. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1046 |
| wlsxNDBCommunicationFailure This trap indicates that communication with Database failed. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1047 |
| wlsxNVrrpStateChange This trap indicates that VRRP state has changed on the controller. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1048 |
| wlsxNRadioAttributesChanged A Trap which indicates changes in the Radio attributes of an
access point. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1049 |
| wlsxNESIServerUp A Trap which indicates that a ESI server is up. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1050 |
| wlsxNESIServerDown A Trap which indicates that a ESI server is down. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1051 |
| wlsxNLicenseExpiry A Trap which indicates that one or more licenses on the controller will expire in wlsxTrapLicenseDaysRemaining days. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1052 |
| wlsxUnsecureAPDetected This trap indicates that an unauthorized access point is connected to the wired network. The access point is declared Rogue because it was matched to a MAC address. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1053 |
| wlsxUnsecureAPResolved This trap indicates that a previously detected access point, classified as Rogue,
is no longer present in the network. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1054 |
| wlsxStaImpersonation This trap indicates that an AM detected Station Impersonation. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1055 |
| wlsxReservedChannelViolation This trap indicates that an AM detected an access point
which is violating the Reserved Channel configuration. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1056 |
| wlsxValidSSIDViolation This trap indicates that an AP has detected an access point is violating
Valid SSID configuration by using an SSID that is reserved for use by a valid AP only. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1057 |
| wlsxChannelMisconfiguration This trap indicates that an AP detected an access point that has a channel misconfiguration
because it is using a channel that is not valid. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1058 |
| wlsxOUIMisconfiguration This trap indicates that an AP detected an access point that has an OUI misconfiguration because
it is using an OUI that is not valid. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1059 |
| wlsxSSIDMisconfiguration This trap indicates that an AP detected an access point that has an SSID misconfiguration because it is using
an SSID that is not valid. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1060 |
| wlsxShortPreableMisconfiguration This trap indicates that an access point has bad Short preamble
configuration. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1061 |
| wlsxWPAMisconfiguration This trap indicates that an AP detected an access point that is misconfigured because it is not using WPA. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1062 |
| wlsxAdhocNetworkDetected This trap indicates that an AM has detected an Ad hoc
network. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1063 |
| wlsxAdhocNetworkRemoved This trap indicates that a previously detected Ad hoc Network is no
longer present in the network. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1064 |
| wlsxStaPolicyViolation This trap indicates that Protection was enforced because a valid station's association to a non-valid access point violated Valid Station policy. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1065 |
| wlsxRepeatWEPIVViolation This trap indicates that an AP detected that a valid access point is using the same WEP initialization vector in consecutive packets. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1066 |
| wlsxWeakWEPIVViolation This trap indicates that an AP detected that a valid access point is using a Weak WEP initialization vector. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1067 |
| wlsxChannelInterferenceDetected This trap indicates that an AP has detected channel interference. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1068 |
| wlsxChannelInterferenceCleared This trap indicates that a previously detected channel interference
is no longer present. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1069 |
| wlsxAPInterferenceDetected This trap indicates that an AP has detected interference for an access point. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1070 |
| wlsxAPInterferenceCleared This trap indicates that the previously detected interference for an access point
is no longer present. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1071 |
| wlsxStaInterferenceDetected This trap indicates that an AP has detected interference for a station. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1072 |
| wlsxStaInterferenceCleared This trap indicates that the previously detected interference for a station
is no longer present. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1073 |
| wlsxFrameRetryRateExceeded This trap indicates that an AP detected that an access point has exceeded the configured upper threshold for Frame Retry Rate. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1074 |
| wlsxFrameReceiveErrorRateExceeded This trap indicates that an AP detected that an access point has exceeded the configured upper threshold for Frame Receive Error Rate. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1075 |
| wlsxFrameFragmentationRateExceeded This trap indicates that an AP detected that an access point exceeded the configured upper threshold for Frame Fragmentation Rate. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1076 |
| wlsxFrameBandWidthRateExceeded This trap indicates that an AP detected that a station or access point has exceeded the configured upper threshold for Bandwidth rate. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1077 |
| wlsxFrameLowSpeedRateExceeded This trap indicates that an AP detected that a station has exceeded the configured upper threshold for Low speed rate. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1078 |
| wlsxFrameNonUnicastRateExceeded This trap indicates that an AP detected that a station has exceeded the configured upper threshold for Non Unicast traffic rate. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1079 |
| wlsxLoadbalancingEnabled This trap indicates that an AM is reporting that an AP
has enabled Load balancing. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1080 |
| wlsxLoadbalancingDisabled This trap indicates that an AM is reporting that an AP
has enabled Load balancing. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1081 |
| wlsxChannelFrameRetryRateExceeded This trap indicates that an AP has detected that the configured upper threshold for Frame Retry Rate was exceeded on a channel. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1082 |
| wlsxChannelFrameFragmentationRateExceeded This trap indicates that an AP has detected that the configured upper threshold for Frame Fragmentation Rate was exceeded on a channel. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1083 |
| wlsxChannelFrameErrorRateExceeded This trap indicates that an AP has detected that the configured upper threshold for Frame Receive Error Rate was exceeded on a channel. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1084 |
| wlsxSignatureMatchAP This trap indicates that an AP detected a signature match in a frame from an access point. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1085 |
| wlsxSignatureMatchSta This trap indicates that an AP detected a signature match in a frame from a Station. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1086 |
| wlsxChannelRateAnomaly This trap indicates that an AP detected frames on a channel which
exceed the configured IDS rate threshold. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1087 |
| wlsxNodeRateAnomalyAP This trap indicates that an AP detected frames transmitted or received by an
access point, which exceed the configured IDS rate threshold. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1088 |
| wlsxNodeRateAnomalySta This trap indicates that an AP detected frames transmitted or received by a
node, which exceed the configured IDS rate threshold. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1089 |
| wlsxEAPRateAnomaly This trap indicates that the rate of EAP Handshake packets
received by an AP has exceeded the configured IDS EAP Handshake rate threshold. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1090 |
| wlsxSignalAnomaly This trap indicates that an AM detected a Signal Anomaly. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1091 |
| wlsxSequenceNumberAnomalyAP This trap indicates that an AM received packets from an AP
which exceeds the acceptable sequence number difference.
The acceptable sequence number difference is an IDS configurat… | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1092 |
| wlsxSequenceNumberAnomalySta This trap indicates that an AM received packets from a Node
which exceeds the acceptable sequence number difference.
The acceptable sequence number difference is an IDS configura… | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1093 |
| wlsxDisconnectStationAttack This trap indicates that an AM detected a station Disconnect
attack. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1094 |
| wlsxApFloodAttack This trap indicates that the number of potential fake APs detected by
an AP has exceeded the configured IDS threshold. This is the total number of fake APs observed across all ba… | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1095 |
| wlsxAdhocNetwork This trap indicates that an AM detected an Ad hoc
Network. An Station is connected to an ad hoc AP. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1096 |
| wlsxWirelessBridge This trap indicates that an AP detected a Wireless Bridge when a WDS frame was seen between the transmitter and receiver addresses. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1097 |
| wlsxInvalidMacOUIAP This trap indicates that an AP detected an invalid MAC OUI in the BSSID of a frame. An invalid MAC OUI suggests that the frame may be spoofed. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1098 |
| wlsxInvalidMacOUISta This trap indicates that an AP detected an invalid MAC OUI in the SRC or DST address of a frame. An invalid MAC OUI suggests that the frame may be spoofed. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1099 |
| wlsxWEPMisconfiguration This trap indicates that an AP detected an access point that is misconfigured because it does not have Privacy enabled. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1100 |
| wlsxStaRepeatWEPIVViolation This trap indicates that an AP detected that a valid station is using the same WEP initialization vector in consecutive packets. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1101 |
| wlsxStaWeakWEPIVViolation This trap indicates that an AP detected that a valid station is using a Weak WEP initialization vector. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1102 |
| wlsxStaAssociatedToUnsecureAP This trap indicates that an AM detected a client associated
with a Rogue access point. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1103 |
| wlsxStaUnAssociatedFromUnsecureAP This trap indicates that a previously detected rogue access point
association is no longer present. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1104 |
| wlsxAdhocNetworkBridgeDetected This trap indicates that an AM has detected an Ad hoc
network that is bridging to a wired network | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1105 |
| wlsxInterferingApDetected This trap indicates that an AP detected an access point classified as Interfering. The access point
is declared Interfering because it is neither authorized or classified as Rogu… | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1106 |
| wlsxPortUp deprecated This trap indicates that a Physical port is up. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1107 |
| wlsxPortDown deprecated This trap indicates that a Physical port is Down. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1108 |
| wlsxBSSIDIsUp A Trap which indicates that an access point BSSID is up. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1109 |
| wlsxBSSIDIsDown A Trap which indicates that an access point BSSID is down. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1110 |
| wlsxColdStart An enterprise version of cold start trap, which contains the controller time stamp. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1111 |
| wlsxWarmStart An enterprise version of warm start trap, which contains the controller time stamp. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1112 |
| wlsxAPImpersonation This trap indicates that an AP detected AP Impersonation because the number of beacons seen has exceeded the expected number by the configured percentage threshold.
The expected n… | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1113 |
| wlsxInformQueueOverFlow This trap indicates that an Inform queue overflow condition occurred. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1114 |
| wlsxNAuthServerIsDown This trap indicates that an authentication server is down. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1115 |
| wlsxCTSTransferError This trap indicates the status of the configuration transfer from the management station. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1116 |
| wlsxCTSTransferSucceeded This trap indicates the status of the configuration transfer from the management station. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1117 |
| wlsxConfigurationUpdateError This trap indicates the configuration update status. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1118 |
| wlsxConfigurationUpdateSucceeded This trap indicates the configuration update status. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1119 |
| wlsxGlobalConfigurationChangeNotification This trap indicates that global configuration was modified on the controller. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1120 |
| wlsxUserEntryChanged This trap indicates that the user configuration has changed. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1121 |
| wlsxAPBssidEntryChanged This trap indicates that the BSSID configuration has changed. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1122 |
| wlsxAPRadioEntryChanged This trap indicates that the Radio configuration has changed. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1123 |
| wlsxAPEntryChanged This trap indicates that the AP configuration has changed. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1124 |
| wlsxSwitchListEntryChanged This trap indicates that the controller list has changed. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1125 |
| wlsxPortEntryChanged This trap indicates that the port configuration has changed. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1126 |
| wlsxVlanEntryChanged This trap indicates that the VLAN configuration has changed. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1127 |
| wlsxVlanInterfaceEntryChanged This trap indicates that the VLAN Interface configuration has changed. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1128 |
| wlsxWindowsBridgeDetected This trap indicates that an AM has detected a station
that is bridging from a wireless network
to a wired network | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1129 |
| wlsxLicenseEntryChanged This trap indicates that the license table has changed. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1130 |
| wlsxEsiServerChanged This trap indicates that the ESI server table has changed. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1131 |
| wlsxMonAPEntryChanged This trap indicates that a monitored AP entry changed | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1132 |
| wlsxMonStationEntryChanged This trap indicates that a monitored station entry changed | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1133 |
| wlsxSignAPNetstumbler This trap indicates that an AP detected a signature match for Netstumbler from an access point. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1134 |
| wlsxSignStaNetstumbler This trap indicates that an AP detected a signature match for Netstumbler from a Station. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1135 |
| wlsxSignAPAsleap This trap indicates that an AP detected a signature match for ASLEAP from an access point. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1136 |
| wlsxSignStaAsleap This trap indicates that an AP detected a signature match for ASLEAP from a Station. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1137 |
| wlsxSignAPAirjack This trap indicates that an AP detected a signature match for AirJack from an access point. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1138 |
| wlsxSignStaAirjack This trap indicates that an AP detected a signature match for AirJack from a Station. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1139 |
| wlsxSignAPNullProbeResp This trap indicates that an AP detected a signature match for Null-Probe-Response from an access point. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1140 |
| wlsxSignStaNullProbeResp This trap indicates that an AP detected a signature match for Null-Probe-Response from a Station. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1141 |
| wlsxSignAPDeauthBcast This trap indicates that an AP detected a signature match for Deauth-Broadcast from an access point. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1142 |
| wlsxSignStaDeauthBcast This trap indicates that an AP detected a signature match for Deauth-Broadcast from a Station. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1143 |
| wlsxWindowsBridgeDetectedAP This trap indicates that an AP is detecting an access point that is bridging from a wireless network
to a wired network. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1144 |
| wlsxWindowsBridgeDetectedSta This trap indicates that an AP is detecting a station that is bridging from a wireless network
to a wired network. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1145 |
| wlsxAdhocNetworkBridgeDetectedAP This trap indicates that an AM has detected an Ad hoc
network that is bridging to a wired network | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1146 |
| wlsxAdhocNetworkBridgeDetectedSta This trap indicates that an AM has detected an Ad hoc
network that is bridging to a wired network | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1147 |
| wlsxDisconnectStationAttackAP This trap indicates that an AM detected a station disconnect
attack. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1148 |
| wlsxDisconnectStationAttackSta This trap indicates that an AM detected a station Disconnect
attack. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1149 |
| wlsxSuspectUnsecureAPResolved This trap indicates that a previously detected access point, classified Suspected
Rogue, is either no longer present in the network or
has changed its state. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1151 |
| wlsxConfigurationLicenseMismatch This trap indicates the configuration update status in the case
where some configuration could not be applied due to missing licenses. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1152 |
| wlsxVoiceCdrBufferThresholdReached This trap indicates that the CDR buffer threshold has been reached | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1153 |
| wlsxTunnelUp This trap indicates that a tunnel interface is up. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1154 |
| wlsxTunnelDown This trap indicates that a tunnel interface is down. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1155 |
| wlsxMeshNodeEntryChanged This trap indicates that the mesh node configuration has changed. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1156 |
| wlsxHtGreenfieldSupported This trap indicates that an AP detected an access point that supports HT Greenfield mode. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1157 |
| wlsxHT40MHzIntoleranceAP This trap indicates that an AP is detecting an access point with the HT 40MHz intolerance setting. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1158 |
| wlsxHT40MHzIntoleranceSta This trap indicates that the system is detecting an HT 40MHz Intolerance setting from a Station. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1159 |
| wlsxNAuthServerAllInService This trap indicates that all authentication servers is a server group are brought back in service. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1160 |
| wlsxNAdhocNetwork This trap indicates that an AP detected an ad hoc
network where a station is connected to an ad hoc access point. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1161 |
| wlsxNAdhocNetworkBridgeDetectedAP This trap indicates that an AP detected an ad hoc
network that is bridging to a wired network. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1162 |
| wlsxNAdhocNetworkBridgeDetectedSta This trap indicates that an AP detected an ad hoc
network that is bridging to a wired network. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1163 |
| wlsxNAuthMaxXsecUserEntries A trap which indicates that the xSec user limit is reached. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1164 |
| wlsxNVpnMaxSessions A trap which indicates that the VPN session limit is reached. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1165 |
| wlsxNRapExpiredPSK A trap which indicates that the RAP is using the Expired PSK. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1166 |
| wlsxNRapWarnExpiredPSK A trap which indicates that the Cached IKE PSK for RAPs will expire soon. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1167 |
| wlsxNConnectionResetWithLocal obsolete A trap which indicates that tcp connection between master controller and local controller has been lost. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1168 |
| wlsxNApOnBackupController A trap which indicates that the AP has registered with the backup controller. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1169 |
| wlsxClientFloodAttack This trap indicates that the number of potential fake clients detected by
an AP has exceeded the configured IDS threshold. This is the total number of fake clients observed acros… | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1170 |
| wlsxValidClientNotUsingEncryption This trap indicates that an AP detected an unencrypted data frame between a valid client and an access point. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1171 |
| wlsxAdhocUsingValidSSID This trap indicates that an AP detected an ad hoc network using a valid/protected SSID. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1172 |
| wlsxAPSpoofingDetected This trap indicates that an AP detected that one of its virtual APs is being spoofed using MAC spoofing. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1173 |
| wlsxClientAssociatingOnWrongChannel This trap indicates that an AP detected a client trying to associate to one of its BSSIDs on the wrong channel. This can be a sign that the BSSID is
being spoofed in order to fo… | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1174 |
| wlsxNDisconnectStationAttack This trap indicates that an AP has determined that a client is under Disconnect Attack because the rate of Assoc/Reassoc Response packets
received by that client exceeds the confi… | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1175 |
| wlsxNStaUnAssociatedFromUnsecureAP This trap indicates that an AP that had previously detected a client association to a Rogue access point is no longer detecting that association. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1176 |
| wlsxOmertaAttack This trap indicates that an AP detected an Omerta attack. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1177 |
| wlsxTKIPReplayAttack This trap indicates that an AP detected a possible TKIP replay attack. If successful this could be the precursor to more
advanced attacks. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1178 |
| wlsxChopChopAttack This trap indicates that an AP detected a ChopChop attack. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1179 |
| wlsxFataJackAttack This trap indicates that an AP detected a FATA-Jack attack. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1180 |
| wlsxInvalidAddressCombination This trap indicates that an AP detected an invalid source and destination combination. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1181 |
| wlsxValidClientMisassociation This trap indicates that an AP detected a misassociation between a valid client and an unsafe AP. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1182 |
| wlsxMalformedHTIEDetected This trap indicates that an AP detected a malformed HT Information Element. This can be the result of a misbehaving wireless driver or it may be an indication of a new wireless at… | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1183 |
| wlsxMalformedAssocReqDetected This trap indicates that an AP detected a malformed association request with a NULL SSID. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1184 |
| wlsxOverflowIEDetected This trap indicates that an AP detected a management frame with a malformed information element. The declared length of the element is larger than the entire frame containing the … | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1185 |
| wlsxOverflowEAPOLKeyDetected This trap indicates that an AP detected a key in an EAPOL Key message with a specified length greater than the length of the entire message. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1186 |
| wlsxMalformedFrameLargeDurationDetected This trap indicates that an AP detected an unusually large duration in a wireless frame. This may be an attempt to block other devices from transmitting. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1187 |
| wlsxMalformedFrameWrongChannelDetected This trap indicates that an AP detected a beacon on one channel advertising another channel. This could be an attempt to lure clients away from a valid AP. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1188 |
| wlsxMalformedAuthFrame This trap indicates that an AP detected an authentication frame with
either a bad algorithm (similar to Fata-Jack) or a bad transaction. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1189 |
| wlsxCTSRateAnomaly This trap indicates that the rate of CTS packets
received by an AP exceeds the configured IDS threshold. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1190 |
| wlsxRTSRateAnomaly This trap indicates that the rate of RTS packets
received by an AP exceeds the configured IDS threshold. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1191 |
| wlsxNRogueAPDetected This trap indicates that an unauthorized access point is connected to the wired network. The access point is
classified as Rogue by the system. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1192 |
| wlsxNRogueAPResolved This trap indicates that a previously detected access point, classified as Rogue,
is either no longer present in the network or it changed its state. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1193 |
| wlsxNeighborAPDetected This trap indicates that an access point has been classified as a Neighbor by the system. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1194 |
| wlsxNInterferingAPDetected This trap indicates that an access point has been classified as Interfering by the system. The access point
is declared Interfering because it is not authorized, nor has it been … | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1195 |
| wlsxNSuspectRogueAPDetected This trap indicates that an access point, classified as Suspected Rogue, is
detected by the system. The AP is suspected to be rogue
with the supplied confidence level. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1196 |
| wlsxNSuspectRogueAPResolved This trap indicates that a previously detected access point, classified as Suspected
Rogue, is either no longer present in the network or
has changed its state. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1197 |
| wlsxBlockAckAttackDetected This trap indicates that an attempt has been made to deny service to
the source address by spoofing a block ACK add request that sets a
sequence number window outside the currentl… | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1198 |
| wlsxHotspotterAttackDetected This trap indicates that a new AP has appeared immediately following a client probe request.
This is indicative of the Hotspotter tool or similar that attempts to trap clients wit… | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1199 |
| wlsxNSignatureMatch This trap indicates that an AP detected a signature match in a frame. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1200 |
| wlsxNSignatureMatchNetstumbler This trap indicates that an AP detected a signature match for Netstumbler in a frame. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1201 |
| wlsxNSignatureMatchAsleap This trap indicates that an AP detected a signature match for ASLEAP in a frame. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1202 |
| wlsxNSignatureMatchAirjack This trap indicates that an AP detected a signature match for Airjack in a frame. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1203 |
| wlsxNSignatureMatchNullProbeResp This trap indicates that an AP detected a signature match for Null-Probe-Response in a frame. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1204 |
| wlsxNSignatureMatchDeauthBcast This trap indicates that an AP detected a signature match for Deauth-Broadcast in a frame. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1205 |
| wlsxNSignatureMatchDisassocBcast This trap indicates that an AP detected a signature match for Disassoc-Broadcast in a frame. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1206 |
| wlsxNSignatureMatchWellenreiter This trap indicates that an AP detected a signature match for Wellenreiter in a frame. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1207 |
| wlsxAPDeauthContainment This trap indicates that an AP has attempted to contain an access point by disconnecting its client. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1208 |
| wlsxClientDeauthContainment This trap indicates that an AP has attempted to contain a client by disconnecting it from the AP that it is associated with. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1209 |
| wlsxAPWiredContainment This trap indicates that an AP has attempted to contain an access point by disrupting traffic to its client on the wired interface. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1210 |
| wlsxClientWiredContainment This trap indicates that an AP has attempted to contain a client by disrupting traffic to it on the wired interface. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1211 |
| wlsxAPTaggedWiredContainment This trap indicates that an AP has attempted to contain an access point by disrupting traffic to its client on the wired interface. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1212 |
| wlsxClientTaggedWiredContainment This trap indicates that an AP has attempted to contain a client by disrupting traffic to it on the wired interface. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1213 |
| wlsxTarpitContainment This trap indicates that an AP has attempted to contain an access point by moving a client that is attempting to associate to it to a tarpit. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1214 |
| wlsxVoiceClientLocationUpdate This trap indicates that the location of voice client has been changed. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1215 |
| wlsxAPChannelChange This trap indicates that an AP changed its channel. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1216 |
| wlsxAPPowerChange This trap indicates that an AP changed its transmit power level. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1217 |
| wlsxAPModeChange This trap indicates that an AP changed its mode from AP to APMonitor or vice versa. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1218 |
| wlsxUserEntryAttributesChanged This trap indicates that the user entry attributes have changed. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1219 |
| wlsxPowerSaveDosAttack This trap indicates that an AP detected a Power Save DoS attack. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1220 |
| wlsxNAPMasterStatusChange obsolete This trap indicates that the status of the AP as seen by
the master controller has changed.
**NOTE: this notification is obsoleted and replaced by
wlsxNAPConductorStatusChange | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1221 |
| wlsxNAdhocUsingValidSSID This trap indicates that an AP detected an ad hoc network node using a valid/protected SSID. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1222 |
| wlsxCRLExpired This trap indicates that the CRL associated with the particular Trustpoint is expired. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1223 |
| wlsxMgmtUserAuthenticationFailed This trap indicates that a management user authentication has failed. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1224 |
| wlsxNConnectionBackfromLocal obsolete A trap which indicates that tcp connection between master controller and local controller is back. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1225 |
| wlsxAPNumUpgradeFailure A trap which indicates the number of upgrade failure of an access point. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1226 |
| wlsxAPNumWarmStarts A trap which indicates the number of warm starts of an access point. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1227 |
| wlsxAPNumColdStarts A trap which indicates the number of cold starts of an access point. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1228 |
| wlsxAPNumDown A trap which indicates the number of down alarms of an access point. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1229 |
| wlsxAPNumRadioDown A trap which indicates the number of radio down alarms of an access point. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1230 |
| wlsxNumClockSyncErrors A trap which indicates the total number of clock sync errors between the
switch and access points. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1231 |
| wlsxNumColdStart A trap which indicates the number of cold-starts of the switch. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1232 |
| wlsxNumWarmStart A trap which indicates the number of warm-starts of the switch. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1233 |
| wlsxWirelessHostedNetworkDetected This trap indicates that an AP detected a wireless client that is
hosting a softAP. The softAP could be used to share the hosting
client's wired or wireless network connection w… | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1234 |
| wlsxClientAssociatedToHostedNetwork This trap indicates that an AP detected that a wireless client associated
to an access point that is hosted by another wireless client. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1235 |
| wlsxThresholdExceeded A trap indicates a particular resource under monitoring has gone above the threshold specified. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1236 |
| wlsxThresholdCleared A trap indicates a particular resource under monitoring has come below the threshold specified. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1237 |
| wlsxWirelessHostedNetworkContainment This trap indicates that containment is being enforced on a client associated to a hosted network. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1238 |
| wlsxHostOfWirelessNetworkContainment This trap indicates that containment is being enforced on a client that is hosting a wireless hosted network. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1239 |
| wlsxEnhancedAdhocContainment This trap indicates that an AP has attempted to contain an adhoc node by disconnecting it from other members of the adhoc network. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1240 |
| wlsxPowerSupplyOKTrap This trap indicates that the system power supply condition have
returned to normal operation status. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1241 |
| wlsxPowerSupplyFailureTrap A trap which indicates that the power supply has failed. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1242 |
| wlsxFanTrayRemovedTrap A Trap which indicates that a fan tray is removed. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1243 |
| wlsxFanTrayInsertedTrap A Trap which indicates that a fan tray is inserted. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1244 |
| wlsxPowerSupplyMissingTrap A Trap which indicates that the power supply is missing. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1245 |
| wlsxStackTopologyChangeTrap When change happens in any topology of the stack element in the
stack, then a notification is sent to the Management Entity. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1246 |
| wlsxStackIfStateChangeTrap When any stacking interface in any stack element joins or leaves
stacking topology, then a notification is sent to the Management
Entity with slot and interface information. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1247 |
| wlsxLicenseServerExpiry A Trap which indicates that licenses sent from the license
server will expire in wlsxTrapLicenseServerDaysRemaining days. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1248 |
| wlsxLicenseClientExpiry A Trap which indicates that licenses contributed by a license
client will expire in wlsxTrapLicenseClientDaysRemaining days. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1249 |
| wlsxIfStateChangeTrap When the link state of an interface changes due to reason
specified by wlsxIfStateChangeReason object, a notification is
sent to the Management Entity with reason for this state c… | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1250 |
| wlsxWMSOffloadRecommended This trap indicates that current state in the WMS module shows that WMS is reaching capacity, and
so it is recommended to enable WMS-Offload. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1251 |
| wlsxAPActiveUplinkChanged When the active uplink of an AP changes, a notification is
sent to the Management Entity with the new uplink type | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1252 |
| wlsxCertExpiringSoon This trap indicates that a particular Certificate is going to expire in less than 60 days. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1253 |
| wlsxCertExpired This trap indicates that a particular Certificate has expired and is no longer valid. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1254 |
| wlsxAPManagedModeConfigFailureTrap This trap indicates that config apply has failed on the IAP. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1255 |
| wlsxNAuthServerAcctTimedOut This trap indicates that the authentication server accounting timed out. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1256 |
| wlsxAPUp A Trap which indicates that AP is Up with AP name and IP address. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1257 |
| wlsxAPDown A Trap which indicates that AP is Down with AP name and IP address. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1258 |
| wlsxPortalServerDown This trap indicates that the captive portal server is down. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1259 |
| wlsxPortalServerUp This trap indicates that the captive portal server is up. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1260 |
| wlsxNAdhocUsingValidSSIDContainment This trap indicates that containment is being enforced on an ad hoc wireless network node using a valid/protected SSID. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1261 |
| wlsxLicensePlatformMismatch A Trap which indicates that license to be installed is not compatible with the platform. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1262 |
| wlsxIAPVoiceClientLocationUpdate The trap represents a IAP voice client location update. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1263 |
| wlsxNAceUsageThreshold A trap which indicates that the ACE Entries table has reached
eighty percent of the maximum limit. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1264 |
| wlsxNWebCCLicenseEnforcement A Trap which indicates that web-cc license enforcement has been triggered. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1265 |
| wlsxNFanAbsent A trap which indicates that the fan is absent. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1266 |
| wlsxWPAFTAttack This trap indicates there is a possible attack of the Fast BSS Transition causing a WPA key re-installation.
This can be indicative of a security breach where an attacker can hija… | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1267 |
| wlsxMitMDetected This trap indicates that an AP detected a possible channel-based Man in the Middle attack by someone using spoofed beacons with an invalid Channel Switch Announcement. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1268 |
| wlsxAPPortUp This trap indicates that AP's secure jack port is Up. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1269 |
| wlsxAPPortDown This trap indicates that AP's secure jack port is Down. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1270 |
| wlsxAPLoopDetected This trap indicates that loop is detected on AP's secure jack port. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1271 |
| wlsxAPBROADCASTSTORM This trap indicates that broadcast storm is detected on AP's secure jack port. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1272 |
| wlsxAPIPConflict This trap indicates that an IP conflict is detected on AP. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1273 |
| wlsxCLEARPASSSERVERINVALID This trap indicates that CLEARPASS server is not valid when using the CA to verity the server for download-role. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1274 |
| wlsxNLowOnFlash1Space A Trap which indicates that the controller is running low on flash1 space. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1275 |
| wlsxFlash1SpaceOK This trap which indicates that the system flash1 space is back
to a sufficient level. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1276 |
| wlsxTHERMALSHUTDOWN This trap indicates that an AP is overheat and in shutdown mode. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1277 |
| wlsxPhonyBSSIDDetected This trap indicates that an AP detected a non-configured BSSID that should belong to one of our known valid APs. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1278 |
| wlsxAPUSBPLUGALARM This trap indicates that an USB device is plugged in or out to an AP. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1279 |
| wlsxNSwitchIPv6Changed This trap indicates that the controller IPv6 address has changed. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1280 |
| wlsxNDot1xThresholdLimitHit A Trap which indicates that the controller is running on high optimum limit. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1281 |
| wlsxNDot1xTotalLimitHit A Trap which indicates that the controller is running on full optimum limit. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1282 |
| wlsxClusterVlanProbeStatus This trap indicates the cluster VLAN probe status. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1283 |
| wlsxClientRejectedByMaxClientCount This trap indicates the client is rejected by the max client count. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1284 |
| wlsxClientPskAuthenticationFailed This trap indicates the client PSK Authentication Failed. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1285 |
| wlsxNStationAddedToDenyList This trap indicates that the station is added to denylist. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1286 |
| wlsxNStationRemovedFromDenyList This trap indicates that the station is removed from denylist. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1287 |
| wlsxNAPConductorStatusChange This trap indicates that the status of the AP as seen by
the conductor controller has changed. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1288 |
| wlsxGhostTunnelserverAttack This trap indicates there is a possible attack of the Ghost Tunnel.
This can be airgap atttack only by beacon and probe request where an attacker can hijack a client. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1289 |
| wlsxGhostTunnelclientAttack This trap indicates there is a possible attack of the Ghost Tunnel.
This can be airgap atttack only by beacon and probe request where an attacker can hijack a client. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1290 |
| wlsxPeerAssociatedToWifiDirectGo This trap indicates that an AP detected a wireless client associated to a WIFI-Direct Group Owner. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1291 |
| wlsxPeerAssociatedToWifiDirectGoContainment This trap indicates that containment is being enforced on a wireless client that is associated to a WIFI-Direct Group Owner. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1292 |
| wlsxLicenseThresholdLimitHit A Trap which indicates that the Licenses are running on high optimum limit. | notification | - | .1.3.6.1.4.1.14823.2.3.1.11.1.2.1293 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wlsxTrapTime This object is used in all the enterprise traps to indicate the
the time when the trap is generated on the controller. | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.14823.2.3.1.11.1.1.60 |
| wlsxTrapTargetAPBSSID This object is used in the traps to indicate the BSSID of the
access point, for which we are raising the trap. If an
Air Monitor is sending the trap then this will indicate
AP. If… | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.14823.2.3.1.11.1.1.5 |
| wlsxTrapTargetAPSSID This object is used in the traps to indicate the SSID of the
access point, for which the trap is being raised. If an
Air Monitor is sending the trap then this will indicate
AP. If… | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.6 |
| wlsxTrapAPRadioNumber This object represents the radio number. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.56 |
| wlsxTrapMatchedMac This object is used in the traps to indicate the MAC address | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.14823.2.3.1.11.1.1.20 |
| wlsxTrapMatchedIp This object is used in the traps to indicate the IP address | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.14823.2.3.1.11.1.1.21 |
| wlsxTrapConfidenceLevel This object is used in the traps to indicate the Confidence Level as a percentage | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.73 |
| wlsxTrapAPLocation This object is used in the traps to indicate the Location of the AP. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.17 |
| wlsxTrapRogueInfoURL This object is used to point to the WEBGUI Rogue AP information
URL. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.57 |
| wlsxTrapMatchedIpv6 This object is used in the traps to indicate the IPv6 address | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.153 |