wlsxStackProtoIfTopoJoined
WLSX-TRAP-MIB ·
.1.3.6.1.4.1.14823.2.3.1.11.1.1.121
Object
scalar
ARUBA-TCArubaStackIfTopoJoined
This object specifies whether an interface has joined the stacking topology or left the topology.
Context
- MIB
- WLSX-TRAP-MIB
- OID
.1.3.6.1.4.1.14823.2.3.1.11.1.1.121- Type
- scalar
- Access
- notifyonly
- Status
- current
- Parent
- wlsxTrapObjectsGroup
- Siblings
- 166
Values & Constraints
Type Values
1 | connected |
2 | disconnected |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wlsxTrapAPMacAddress This object is used in the traps to indicate
the wired MAC address of an access point, for which the trap is being raised. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.14823.2.3.1.11.1.1.1 |
| wlsxReceiverMac This object is used in the traps to indicate the MAC address of
the receiver. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.14823.2.3.1.11.1.1.10 |
| wlsxTrapAPPrevMode This Object represents the APs Previous Mode. | scalar | ARUBA-TCArubaAccessPointMode | .1.3.6.1.4.1.14823.2.3.1.11.1.1.100 |
| wlsxTrapAPARMChangeReason This Object represents the APs Previous Mode. | scalar | ARUBA-TCArubaARMChangeReason | .1.3.6.1.4.1.14823.2.3.1.11.1.1.101 |
| wlsxTrapAPChannelSec This object is used in the traps to indicate the Current Secondary Channel. | scalar | ARUBA-TCArubaHTExtChannel | .1.3.6.1.4.1.14823.2.3.1.11.1.1.102 |
| wlsxTrapUserAttributeChangeType This object represents type of the configuration change. | scalar | ARUBA-TCArubaConfigurationChangeType | .1.3.6.1.4.1.14823.2.3.1.11.1.1.103 |
| wlsxTrapApControllerIp IP address of the controller to which the AP is
(or was most recently) registered. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.14823.2.3.1.11.1.1.104 |
| wlsxTrapApMasterStatus obsolete Status of the AP as seen by the master when the status changes.
**NOTE: this object is obsoleted and replaced by
wlsxTrapApConductorStatus | scalar | ARUBA-TCArubaAPMasterStatus | .1.3.6.1.4.1.14823.2.3.1.11.1.1.105 |
| wlsxTrapCaName This object is used in the traps to indicate the name of the trustpoint. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.106 |
| wlsxTrapCrlName This object is used in the traps to indicate the name of the crl. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.107 |
| wlsxTrapCount This object represents the number of occurrence of this trap. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.108 |
| wlsxTrapPowerSupplyNumber This object represents the power supply number. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.109 |
| wlsxTrapTransmitterMac This object is used in the traps to indicate the MAC address of
the transmitter. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.14823.2.3.1.11.1.1.11 |
| wlsxTrapFanTrayNumber This object represents the Fan Tray number. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.110 |
| wlsxTrapClientClassification This object is used in the traps to indicate the classification of the client. | scalar | ARUBA-TCArubaStationType | .1.3.6.1.4.1.14823.2.3.1.11.1.1.111 |
| wlsxThresholdResourceType This object represents the Threshold alert's Resource Type . | scalar | ARUBA-TCArubaThresholdResourceType | .1.3.6.1.4.1.14823.2.3.1.11.1.1.112 |
| wlsxThresholdResourceName This object represents the Threshold alert's Resource Name . | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.113 |
| wlsxThresholdValue This object represents the Threshold alert's set threshold value. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.114 |
| wlsxResourceValue This object represents the Threshold alert's actual value. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.115 |
| wlsxStackPrevSlot This object specifies the slot number of this stack element prior
to topology change in stack. A value of -1 indicates that this slot
was not in Active state of stack prior to top… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.116 |
| wlsxStackCurrentSlot This object specifies the slot number of this stack element after
the topology change in stack. A value of -1 indicates that this slot
is not in Active state of stack after the to… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.117 |
| wlsxStackPrevState This object specifies the state of this stack element prior to
topology change in stack. | scalar | ARUBA-TCArubaStackState | .1.3.6.1.4.1.14823.2.3.1.11.1.1.118 |
| wlsxStackCurrentState This object specifies the state of this stack element
after topology change in stack. | scalar | ARUBA-TCArubaStackState | .1.3.6.1.4.1.14823.2.3.1.11.1.1.119 |
| wlsxTrapReceiverMac This object is used in the traps to indicate the MAC address of
the receiver. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.14823.2.3.1.11.1.1.12 |
| wlsxStackChangeEvent This object specifies the event which caused change in topology in
stack. | scalar | ARUBA-TCArubaStackChangeEvent | .1.3.6.1.4.1.14823.2.3.1.11.1.1.120 |
| wlsxStackMemberMacAddress This object specifies mac-address of this stack element. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.14823.2.3.1.11.1.1.122 |
| wlsxStackMemberSlotNumber This object specifies the slot number of this element in stack. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.123 |
| wlsxStackIfName This object specifies the interface name which is part of stacking
link connected to other stacking element. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.124 |
| wlsxTrapLicenseServerDaysRemaining This object represents number of the days remaining prior to expiry
of license limits sent by the server. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.125 |
| wlsxTrapLicenseClientDaysRemaining This object represents number of the days remaining prior to expiry
of licenses contributed by a license client. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.126 |
| wlsxIfIndex This object specifies the ifIndex. | scalar | ARUBA-TCInterfaceIndex | .1.3.6.1.4.1.14823.2.3.1.11.1.1.127 |
| wlsxIfState This object specifies the state of an interface. | scalar | ARUBA-TCArubaIfState | .1.3.6.1.4.1.14823.2.3.1.11.1.1.128 |
| wlsxIfStateChangeReason This object specifies the reason for interface state change. | scalar | ARUBA-TCArubaIfStateChangeReason | .1.3.6.1.4.1.14823.2.3.1.11.1.1.129 |
| wlsxTrapSnr This object is used in the traps to indicate the Signal to Noise
ratio. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.13 |
| wlsxTrapAPPreviousUplinkType This object specifies the up link type for an AP. | scalar | ARUBA-TCArubaAPUplinkType | .1.3.6.1.4.1.14823.2.3.1.11.1.1.130 |
| wlsxTrapAPPreviousUplinkActiveTime This object specifies the up link type for an AP. | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.14823.2.3.1.11.1.1.131 |
| wlsxTrapAPActiveUplinkType This object specifies the up link type for an AP. | scalar | ARUBA-TCArubaAPUplinkType | .1.3.6.1.4.1.14823.2.3.1.11.1.1.132 |
| wlsxTrapAPUplinkChangeReason This object specifies the up link change reason. | scalar | ARUBA-TCArubaAPUplinkChangeReason | .1.3.6.1.4.1.14823.2.3.1.11.1.1.133 |
| wlsxTrapExpiringCertName This object is used in the traps to indicate the name of the certificate that is expiring in less than 60 days. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.134 |
| wlsxTrapExpiredCertName This object is used in the traps to indicate the name of the certificate that has expired. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.135 |
| wlsxTrapHTMode This object represents HT Mode. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.136 |
| wlsxTrapPhyType This object represents Physical Type. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.137 |
| wlsxTrapAPManagedModeConfigFailure This object indicates the error for the failure of config apply on IAP. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.138 |
| wlsxTrapAuthServerAddress This object is used in the traps to indicate the
Authentication Server IP used for Authentication. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.14823.2.3.1.11.1.1.139 |
| wlsxTrapSignatureName This object is used in the traps to indicate the Signature Name. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.14 |
| wlsxTrapPortalServerName This object is used in the traps to indicate the
Captive Portal Server used for Authentication. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.140 |
| wlsxTrapPortalServerAddress This object is used in the traps to indicate the
Captive Portal Server IP or host name used for Authentication. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.141 |
| wlsxTrapPortalServerDownReason This object specifies the captive portal server down reason. | scalar | ARUBA-TCArubaPortalServerDownReason | .1.3.6.1.4.1.14823.2.3.1.11.1.1.142 |
| wlsxTrapLicensePlatformMismatchKey This object represents license incompatibility with the given
platform. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.143 |
| wlsxTrapTargetAPName This object is used in the traps to indicate the target's AP name. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.144 |
| wlsxTrapTargetAPMac This object is used in the traps to indicate the target's MAC address. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.14823.2.3.1.11.1.1.145 |
| wlsxTrapAPUSBStatus This object represents plug in or plug out status of an USB device. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.146 |
| wlsxTrapUSBVendorProductID This object represents vendor ID or product ID of an USB device. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.147 |
| wlsxTrapSwitchIpv6 This object represents the controller IPv6 address. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.148 |
| wlsxTrapStationBlackListReasonStr obsolete The Reason for which a station is black listed in details.
**NOTE: this trap is obsoleted and replaced by
wlsxTrapStationDenyListReasonStr | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.149 |
| wlsxTrapFrameType This object is used in the traps to indicate the Frame Type | scalar | ARUBA-TCArubaFrameType | .1.3.6.1.4.1.14823.2.3.1.11.1.1.15 |
| wlsxTrapPeerIpAddress This object is used in the traps to indicate the peer IP address of Cluster VLAN probe. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.150 |
| wlsxTrapConnectionStatus This object is used in the traps to indicate the Connection status of Cluster VLAN probe. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.151 |
| wlsxTrapFailedVlan This object is used in the traps to indicate the failed VLAN id of cluster VLAN probe. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.152 |
| wlsxTrapMatchedIpv6 This object is used in the traps to indicate the IPv6 address | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.153 |
| wlsxTrapDeviceIpv6Address This object represents the IPv6 address of a device seen by an AP. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.154 |
| wlsxTrapAuthFailureReason This object represents the reason for the authentication failure. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.155 |
| wlsxTrapAPPhyType This object represents Band Information. | scalar | ARUBA-TCArubaPhyType | .1.3.6.1.4.1.14823.2.3.1.11.1.1.156 |
| wlsxTrapAPSecChannel This object represents Secondary Channel. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.157 |
| wlsxTrapAPHTMode This object represents HT-Mode Information. | scalar | ARUBA-TCArubaHTMode | .1.3.6.1.4.1.14823.2.3.1.11.1.1.158 |
| wlsxTrapAPBand This object represents the radio band on which an AP operates on. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.159 |
| wlsxTrapAddressType This object is used in the traps to indicate the Address type. | scalar | ARUBA-TCArubaAddressType | .1.3.6.1.4.1.14823.2.3.1.11.1.1.16 |
| wlsxTrapTargetAPBand This object represents the radio band on which the target AP operates on. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.160 |
| wlsxTrapStationDenyListReason The Reason for which a station is added to denylist. | scalar | ARUBA-TCArubaDenyListReason | .1.3.6.1.4.1.14823.2.3.1.11.1.1.161 |
| wlsxTrapStationDenyListReasonStr The Reason for which a station is added to denylist in details. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.162 |
| wlsxTrapApConductorStatus Status of the AP as seen by the conductor when the status changes. | scalar | ARUBA-TCArubaAPConductorStatus | .1.3.6.1.4.1.14823.2.3.1.11.1.1.163 |
| wlsxTrapAPPrevPhyType This object represents Prev Band Information. | scalar | ARUBA-TCArubaPhyType | .1.3.6.1.4.1.14823.2.3.1.11.1.1.164 |
| wlsxTrapAPPrevHTMode This object represents Previous HT-Mode Information. | scalar | ARUBA-TCArubaHTMode | .1.3.6.1.4.1.14823.2.3.1.11.1.1.165 |
| wlsxLicenseType This object is used in the traps to indicate the License Type. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.166 |
| wlsxLicensePoolName This object is used in the traps to indicate the pool name for a License. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.167 |
| wlsxTrapAPLocation This object is used in the traps to indicate the Location of the AP. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.17 |
| wlsxTrapAPChannel This object is used in the traps to indicate the Current Channel. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.18 |
| wlsxTrapAPTxPower This object is used in the traps to indicate the AP Transmit Power. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.19 |
| wlsxTrapAPIpAddress This object is used in the traps to indicate
the IP address of an access point, for which the trap is being raised. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.14823.2.3.1.11.1.1.2 |
| wlsxTrapMatchedMac This object is used in the traps to indicate the MAC address | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.14823.2.3.1.11.1.1.20 |
| wlsxTrapMatchedIp This object is used in the traps to indicate the IP address | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.14823.2.3.1.11.1.1.21 |
| wlsxTrapRogueIfoURL This object is used to point to the WEBUI Rogue AP information URL. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.22 |
| wlsxTrapVlanId This object is used in the traps to indicate the VLAN Id. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.23 |
| wlsxTrapAdminStatus This object is used in the traps to indicate the admin status of
VLAN. | scalar | ARUBA-TCArubaEnableValue | .1.3.6.1.4.1.14823.2.3.1.11.1.1.24 |
| wlsxTrapOperStatus This object is used in the traps to indicate the admin status of
VLAN. | scalar | ARUBA-TCArubaOperStateValue | .1.3.6.1.4.1.14823.2.3.1.11.1.1.25 |
| wlsxTrapAuthServerName This object is used in the traps to indicate the
Authentication Server used for Authentication. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.26 |
| wlsxTrapAuthServerTimeout This object is used in the traps to indicate the
Authentication Server Timeout. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.27 |
| wlsxTrapCardSlot This object is used in the traps to indicate the
Slot in which this card is present. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.28 |
| wlsxTrapTemperatureValue This object is used in the traps to indicate the
Temperature Value. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.29 |
| wlsxTrapAPBSSID This object is used in the traps to indicate the BSSID of the
access point, for which the trap is being raised. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.14823.2.3.1.11.1.1.3 |
| wlsxTrapProcessName This object is used in the traps to indicate the
Process name. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.30 |
| wlsxTrapFanNumber This object is used in the traps to indicate the
Fan Number. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.31 |
| wlsxTrapVoltageType This object is used in the traps to indicate the
type of Voltage. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.32 |
| wlsxTrapVoltageValue This object is used in the traps to indicate the
voltage value in Float. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.33 |
| wlsxTrapStationBlackListReason obsolete The Reason for which a station is black listed.
**NOTE: this trap is obsoleted and replaced by
wlsxTrapStationDenyListReason | scalar | ARUBA-TCArubaBlackListReason | .1.3.6.1.4.1.14823.2.3.1.11.1.1.34 |
| wlsxTrapSpoofedIpAddress This object is used in a trap to identify a spoofed IP address. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.14823.2.3.1.11.1.1.35 |
| wlsxTrapSpoofedOldPhyAddress This object is used in a trap to identify an old MAC address. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.14823.2.3.1.11.1.1.36 |
| wlsxTrapSpoofedNewPhyAddress This object is used in a trap to identify a New MAC address. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.14823.2.3.1.11.1.1.37 |
| wlsxTrapDBName This object is used in a trap to identify name of the database. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.38 |
| wlsxTrapDBUserName This object is used in a trap to identify name of the database user. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.39 |
| wlsxTrapEssid This object is used in the traps to indicate the SSID of the
access point, for which the trap is being raised. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.4 |
| wlsxTrapDBIpAddress This object is used in a trap to identify the IpAddress of the
Database. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.40 |
| wlsxTrapDBType This object is used in a trap to identify the port of the user. | scalar | ARUBA-TCArubaDBType | .1.3.6.1.4.1.14823.2.3.1.11.1.1.41 |
| wlsxTrapVrrpID This object contains the Virtual Router Identifier. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.42 |
| wlsxTrapVrrpMasterIp This object contains the Master IP address. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.14823.2.3.1.11.1.1.43 |
| wlsxTrapVrrpOperState This object represents the VRRP Operational state. | scalar | ARUBA-TCArubaVrrpState | .1.3.6.1.4.1.14823.2.3.1.11.1.1.44 |
| wlsxTrapESIServerGrpName This object represents the External Services Interface (ESI) Server
Group name | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.45 |
| wlsxTrapESIServerName This object represents the External Services Interface (ESI) Server
Name | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.46 |
| wlsxTrapESIServerIpAddress This object represents the External Services Interface (ESI) Server
IP address | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.14823.2.3.1.11.1.1.47 |
| wlsxTrapLicenseDaysRemaining This object represents number of the days remaining prior to a
license expiry. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.48 |
| wlsxTrapSwitchIp This object represents the controller IP address. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.14823.2.3.1.11.1.1.49 |
| wlsxTrapTargetAPBSSID This object is used in the traps to indicate the BSSID of the
access point, for which we are raising the trap. If an
Air Monitor is sending the trap then this will indicate
AP. If… | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.14823.2.3.1.11.1.1.5 |
| wlsxTrapSwitchRole This object represents the Role of the controller. | scalar | ARUBA-TCArubaSwitchRole | .1.3.6.1.4.1.14823.2.3.1.11.1.1.50 |
| wlsxTrapUserIpAddress This object represents IP address of the User. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.14823.2.3.1.11.1.1.51 |
| wlsxTrapUserPhyAddress This object represents MAC address of the User. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.14823.2.3.1.11.1.1.52 |
| wlsxTrapUserName This object represents the user name. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.53 |
| wlsxTrapUserRole This object represents the Authentication method of the user. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.54 |
| wlsxTrapUserAuthenticationMethod This object represents the Authentication method of the user. | scalar | ARUBA-TCArubaAuthenticationMethods | .1.3.6.1.4.1.14823.2.3.1.11.1.1.55 |
| wlsxTrapAPRadioNumber This object represents the radio number. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.56 |
| wlsxTrapRogueInfoURL This object is used to point to the WEBGUI Rogue AP information
URL. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.57 |
| wlsxTrapInterferingAPInfoURL This object is used to point to the WEBGUI Rogue interfering
AP information URL. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.58 |
| wlsxTrapPortNumber This object is used in the traps to indicate the
port number. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.59 |
| wlsxTrapTargetAPSSID This object is used in the traps to indicate the SSID of the
access point, for which the trap is being raised. If an
Air Monitor is sending the trap then this will indicate
AP. If… | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.6 |
| wlsxTrapTime This object is used in all the enterprise traps to indicate the
the time when the trap is generated on the controller. | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.14823.2.3.1.11.1.1.60 |
| wlsxTrapHostIp This object represents the Trap host. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.14823.2.3.1.11.1.1.61 |
| wlsxTrapHostPort This object represents the Trap host port. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.62 |
| wlsxTrapConfigurationId This object represents the ID of the configuration, to be used in traps. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.63 |
| wlsxTrapCTSURL This object represents the URL from which the transfer should happen. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.64 |
| wlsxTrapCTSTransferType This object represents the transfer type, upload or download. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.65 |
| wlsxTrapConfigurationState This object represents state of the configuration transfer. | scalar | ARUBA-TCArubaConfigurationState | .1.3.6.1.4.1.14823.2.3.1.11.1.1.66 |
| wlsxTrapUpdateFailureReason This object represents the reason for the update failure. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.67 |
| wlsxTrapUpdateFailedObj This variable represents the AMAPI object which is the reason for the the update failure. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.68 |
| wlsxTrapTableEntryChangeType This object represents type of the configuration change. | scalar | ARUBA-TCArubaConfigurationChangeType | .1.3.6.1.4.1.14823.2.3.1.11.1.1.69 |
| wlsxTrapTargetAPChannel This object is used in the traps to indicate the channel of the
access point, for which the trap is being raised. If an
air monitor is sending the trap then this will indicate
AP.… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.7 |
| wlsxTrapGlobalConfigObj This variable represents the AMAPI object corresponding to the global configuration change. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.70 |
| wlsxTrapTableGenNumber This object represents generation number of a table. Used in the MMS, to keep track of the table content changes. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.71 |
| wlsxTrapLicenseId This object is used in the traps to indicate the license ID. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.72 |
| wlsxTrapConfidenceLevel This object is used in the traps to indicate the Confidence Level as a percentage | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.73 |
| wlsxTrapMissingLicenses This variable indicates any licenses that are not present during a configuration update | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.74 |
| wlsxVoiceCurrentNumCdr This object represents the number of CDRs in buffer. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.75 |
| wlsxTrapTunnelId This Object represents the tunnel ID. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.76 |
| wlsxTrapTunnelStatus This Object represents the tunnel Status. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.77 |
| wlsxTrapTunnelUpReason This Object represents the tunnel up reason. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.78 |
| wlsxTrapTunnelDownReason This Object represents the tunnel down reason. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.79 |
| wlsxTrapNodeMac This object is used in the traps to indicate the MAC address of
a node. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.14823.2.3.1.11.1.1.8 |
| wlsxTrapApSerialNumber This object represents the AP Serial Number. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.80 |
| wlsxTrapTimeStr This object represents the Time in String format. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.81 |
| wlsxTrapMasterIp obsolete This object represents the master IP address. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.14823.2.3.1.11.1.1.82 |
| wlsxTrapLocalIp obsolete This object represents the Local IP address. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.14823.2.3.1.11.1.1.83 |
| wlsxTrapMasterName obsolete This object represents the master controller name. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.84 |
| wlsxTrapLocalName obsolete This object represents the local controller name. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.85 |
| wlsxTrapPrimaryControllerIp This object represents the IP address of the AP's primary controller. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.14823.2.3.1.11.1.1.86 |
| wlsxTrapBackupControllerIp This object represents the IP address of the AP's backup controller. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.14823.2.3.1.11.1.1.87 |
| wlsxTrapSpoofedFrameType This object is used in the traps to indicate the Spoofed Frame Type | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.88 |
| wlsxTrapAssociationType This object is used in the traps to indicate the type of association | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.89 |
| wlsxTrapSourceMac This object is used in the traps to indicate the MAC address of
the source. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.14823.2.3.1.11.1.1.9 |
| wlsxTrapDeviceIpAddress This object represents the IP address of a device seen by an AP. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.14823.2.3.1.11.1.1.90 |
| wlsxTrapDeviceMac This object represents the MAC address of a device seen by an AP. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.14823.2.3.1.11.1.1.91 |
| wlsxTrapVcIpAddress This object represents the Ip Address of a Voice client. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.14823.2.3.1.11.1.1.92 |
| wlsxTrapVcMacAddress This object represents the MAC address of a Voice client. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.14823.2.3.1.11.1.1.93 |
| wlsxTrapAPName This object is used in the traps to indicate the Name of the AP. | scalar | OctetString | .1.3.6.1.4.1.14823.2.3.1.11.1.1.94 |
| wlsxTrapApMode This Object represents the AP Mode. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.95 |
| wlsxTrapAPPrevChannel This object is used in the traps to indicate the Previous Channel. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.96 |
| wlsxTrapAPPrevChannelSec This object is used in the traps to indicate the Previous Secondary Channel. | scalar | ARUBA-TCArubaHTExtChannel | .1.3.6.1.4.1.14823.2.3.1.11.1.1.97 |
| wlsxTrapAPPrevTxPower This object is used in the traps to indicate previous AP Transmit Power. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.11.1.1.98 |
| wlsxTrapAPCurMode This Object represents the APs Current Mode. | scalar | ARUBA-TCArubaAccessPointMode | .1.3.6.1.4.1.14823.2.3.1.11.1.1.99 |