apTotalTime
WLSX-SWITCH-MIB ·
.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.10
Object
column
SNMPv2-SMITimeTicks
Time since the Ap is connected to the switch
Context
- MIB
- WLSX-SWITCH-MIB
- OID
.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.10- Type
- column
- Access
- readonly
- Status
- current
- Parent
- wlsxSwitchAccessPointEntry
- Table
- wlsxSwitchAccessPointTable
- Siblings
- 18
Syntax
SNMPv2-SMITimeTicks
- Source
- SNMPv2-SMITimeTicks
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| apBSSID The Physical Address of the Access Point. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.1 |
| apInactiveTime Time since the Ap has been inactive | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.11 |
| apLoadBalancing Indicates whether Load balancing is enabled or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.12 |
| apChannelNoise Indicates the noise on the channel | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.13 |
| apSignalToNoiseRatio SNR for the BSSID. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.14 |
| apTransmitRate Indicates Transmit rate of the channel | column | Enumeration | .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.15 |
| apReceiveRate Indicates Receive rate of the channel | column | Enumeration | .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.16 |
| apCurrentChannelV2 The Current Operating frequency channel. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.17 |
| apSecChannelNum The secondary channel number for 80+80MHz operation. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.18 |
| apHTMode The HT Mode of the AP. | column | - | .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.19 |
| apESSID ESSID of the Access Point | column | OctetString | .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.2 |
| apSlot Slot to which the Access Point is connected. | column | Unsigned32 | .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.3 |
| apPort Port to which the Access Point is connected. | column | Unsigned32 | .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.4 |
| apIpAddress Address of the Access Point. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.5 |
| apPhyType Physical Layer Protocol support of the AP. | column | Enumeration | .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.6 |
| apType Indicates whether the Access point is an Air Monitor or regular AP. | column | Enumeration | .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.7 |
| apCurrentChannel deprecated The Current Operating frequency channel. | column | Integer32 | .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.8 |
| apLocation Location of the AP defined in Building.Floor.... mode. | column | OctetString | .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.9 |