apLocation

WLSX-SWITCH-MIB · .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.9

MIB view Table view

Object

column OctetString

Location of the AP defined in Building.Floor.... mode.

Context

MIB: WLSX-SWITCH-MIB
OID: .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.9
Type: column
Access: readonly
Status: current
Parent: wlsxSwitchAccessPointEntry
Table: wlsxSwitchAccessPointTable
Siblings: 18

Syntax

OctetString

Values & Constraints

Object Constraints

range: 0-32

Related Objects

Sibling Objects

Object	Type	Syntax	OID
apBSSID The Physical Address of the Access Point.	column	SNMPv2-TCMacAddress	`.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.1`
apTotalTime Time since the Ap is connected to the switch	column	SNMPv2-SMITimeTicks	`.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.10`
apInactiveTime Time since the Ap has been inactive	column	SNMPv2-SMITimeTicks	`.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.11`
apLoadBalancing Indicates whether Load balancing is enabled or not.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.12`
apChannelNoise Indicates the noise on the channel	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.13`
apSignalToNoiseRatio SNR for the BSSID.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.14`
apTransmitRate Indicates Transmit rate of the channel	column	Enumeration	`.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.15`
apReceiveRate Indicates Receive rate of the channel	column	Enumeration	`.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.16`
apCurrentChannelV2 The Current Operating frequency channel.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.17`
apSecChannelNum The secondary channel number for 80+80MHz operation.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.18`
apHTMode The HT Mode of the AP.	column	-	`.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.19`
apESSID ESSID of the Access Point	column	OctetString	`.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.2`
apSlot Slot to which the Access Point is connected.	column	Unsigned32	`.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.3`
apPort Port to which the Access Point is connected.	column	Unsigned32	`.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.4`
apIpAddress Address of the Access Point.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.5`
apPhyType Physical Layer Protocol support of the AP.	column	Enumeration	`.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.6`
apType Indicates whether the Access point is an Air Monitor or regular AP.	column	Enumeration	`.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.7`
apCurrentChannel deprecated The Current Operating frequency channel.	column	Integer32	`.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.8`