ifExtNOperState
WLSX-IFEXT-MIB ·
.1.3.6.1.4.1.14823.2.2.1.3.1.5.1.6
Object
column
Enumeration
The current operational state of the interface.
Context
- MIB
- WLSX-IFEXT-MIB
- OID
.1.3.6.1.4.1.14823.2.2.1.3.1.5.1.6- Type
- column
- Access
- readonly
- Status
- current
- Parent
- wlsxIfExtNPortEntry
- Table
- wlsxIfExtNPortTable
- Siblings
- 23
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | up |
2 | down |
3 | testing |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ifExtNSlotNumber This object represents the user-visible (zero-based) Physical Slot of the Interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.2.1.3.1.5.1.1 |
| ifExtNMode This object indicates if the port is in a Trunk mode or access mode.
This object provides default switch port value if ifExtIsMonitoring
is true(1). | column | ARUBA-TCArubaPortMode | .1.3.6.1.4.1.14823.2.2.1.3.1.5.1.10 |
| ifExtNAccessVlanId The VLAN Id when the port is in Access Mode. This object provides
default switch port value if ifExtIsMonitoring is true(1). | column | ARUBA-TCArubaVlanValidRange | .1.3.6.1.4.1.14823.2.2.1.3.1.5.1.11 |
| ifExtNTrunkNativeVlanId The native VLAN Id of the Port, when the port is in dot1q mode.
This object provides default switch port value if ifExtIsMonitoring
is true(1). | column | ARUBA-TCArubaVlanValidRange | .1.3.6.1.4.1.14823.2.2.1.3.1.5.1.12 |
| ifExtNTrunkIsAllowedAll When the mode of the port is Trunk, this Object indicates
if the port is part of all the configured Vlans.
This object provides default switch port value if ifExtIsMonitoring
is t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.14823.2.2.1.3.1.5.1.13 |
| ifExtNTrunkAllowedVlanList A string of octets containing one bit per VLAN for a
total of 4096 VLANs in the management domain.
The most significant bit of the octet string is the
lowest value VLAN of 4096 VL… | column | OctetString | .1.3.6.1.4.1.14823.2.2.1.3.1.5.1.14 |
| ifExtNIngressACLName This object represents the Ingress ACL name applied to the port.
An Empty string indicates that there is not ACL applied on this
port. | column | OctetString | .1.3.6.1.4.1.14823.2.2.1.3.1.5.1.15 |
| ifExtNEgressACLName This object represents the Egress ACL name applied to the port.
An Empty string indicates that there is not ACL applied on this
port. | column | OctetString | .1.3.6.1.4.1.14823.2.2.1.3.1.5.1.16 |
| ifExtNSessionACLName This object represents the Session ACL name applied to the port.
An Empty string indicates that there is not ACL applied on this
port. | column | OctetString | .1.3.6.1.4.1.14823.2.2.1.3.1.5.1.17 |
| ifExtNXsecVlan This object indicates if the port is an Xsec Port. | column | ARUBA-TCArubaVlanValidRange | .1.3.6.1.4.1.14823.2.2.1.3.1.5.1.18 |
| ifExtNIsMonitoring This object indicates if the port is used for Port monitoring.
When the value of this object is true(1), then below objects provide
default switch port values configured on this p… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.14823.2.2.1.3.1.5.1.19 |
| ifExtNModuleNumber This object represents the user-visible (zero-based) Physical Module of the Interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.2.1.3.1.5.1.2 |
| ifExtNIsMux This object indicates if the port is used as a MUX Port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.14823.2.2.1.3.1.5.1.20 |
| ifExtNPortSpeed Speed of the Port. | column | ARUBA-TCArubaPortSpeed | .1.3.6.1.4.1.14823.2.2.1.3.1.5.1.21 |
| ifExtNPortDuplex Duplexity of the Port. | column | ARUBA-TCArubaPortDuplex | .1.3.6.1.4.1.14823.2.2.1.3.1.5.1.22 |
| ifExtNPortType Type of the Port. | column | ARUBA-TCArubaPortType | .1.3.6.1.4.1.14823.2.2.1.3.1.5.1.23 |
| ifExtNDescr Port Description. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.14823.2.2.1.3.1.5.1.24 |
| ifExtNPortNumber This object represents the user-visible (zero-based) Physical Port of the Interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.2.1.3.1.5.1.3 |
| ifExtNPortIfIndex This is the ifIndex in ifTable, representing this slot, module and port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.2.1.3.1.5.1.4 |
| ifExtNAdminState The desired state of the interface. | column | ARUBA-TCArubaEnableValue | .1.3.6.1.4.1.14823.2.2.1.3.1.5.1.5 |
| ifExtNPoeState The current state of the power over ethernet capability of the
port. | column | ARUBA-TCArubaPoeState | .1.3.6.1.4.1.14823.2.2.1.3.1.5.1.7 |
| ifExtNIsTrusted The object indicates if the port is used in the trusted side of the
network or the untrusted side. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.14823.2.2.1.3.1.5.1.8 |
| ifExtNDot1DState Current Dot1d state of the Port. | column | ARUBA-TCArubaDot1dState | .1.3.6.1.4.1.14823.2.2.1.3.1.5.1.9 |