wlsrRegDomain

WLSR-AP-MIB · .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.25

Object

column deprecated SNMPv2-SMIInteger32

This Object represents the configured Regulatory Domain this AP 
will adhere to.
1 -- US
2 -- JAPAN
3 -- EU
4 -- EU2
5 -- EU3
6 -- KOREA
7 -- CHINA
8 -- France
9 -- Singapore
10 -- MALAY
11 -- BRAZIL
12 -- Taiwan
13 -- Czech Republic
14 -- GR
15 -- South Africa
16 -- Argentina
17 -- Australia
18 -- Chile

Context

MIB: WLSR-AP-MIB
OID: .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.25
Type: column
Access: readonly
Status: deprecated
Parent: wlsrConfigEntry
Table: wlsrConfigTable
Siblings: 25

Syntax

SNMPv2-SMIInteger32

Source: SNMPv2-SMIInteger32
Base type: Integer32

Values & Constraints

Type Constraints

range: -2147483648..2147483647

Related Objects

Sibling Objects

Object	Type	Syntax	OID
wlsrBSSID BSSID of the WIFI Interface	column	SNMPv2-TCMacAddress	`.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.1`
wlsrPowerMgmt This attribute indicates whether Power Management is enabled or not.	column	Enumeration	`.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.10`
wlsrLoadBalance This attribute indicates if load balancing is enabled or disabled.	column	Enumeration	`.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.11`
wlsrSupportedRates Basic Bit rates supported by this WIFI interface.	column	Bits	`.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.12`
wlsrDTIMPeriod This attribute shall specify the number of beacon intervals that shall elapse between transmission of Beacons frames containing a TIM element whose DTIM Count field is 0. This val…	column	Integer32	`.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.13`
wlsrLMSAddress This attribute indicates the IP Address of the Local switch that the AP is connected to.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.14`
wlsrEncryption This attribute indicates the Encryption type of the WIFI interface.	column	Bits	`.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.15`
wlsrStatus This attribute indicates the status of the WIFI Interface.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.17`
wlsrAgeout This attribute indicates the ageout value in seconds.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.18`
wlsrMTU This attribute indicates the MTU of the WIFI Interface.	column	Integer32	`.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.19`
wlsrESSID ESSID of the WIFI Interface	column	OctetString	`.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.2`
wlsrLocation This attribute indicates the Location of the Access Point in Building.Floor.location format.	column	OctetString	`.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.20`
wlsrHideSSID This attribute indicates if SSID is hidden or not.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.21`
wlsrDenyBroadcast A True value indicates that Broadcast is disabled.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.22`
wlsrBGmode This attributes indicates the mode of the WIFI Interface	column	Enumeration	`.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.23`
wlsrCardType Indicates the type of the radio card.	column	Enumeration	`.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.24`
wlsrCountryCode This Object represents the configured Country code .	column	OctetString	`.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.26`
wlsrTxRates Transmit Bit rates supported by this WIFI interface.	column	Bits	`.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.27`
wlsrMode Mode of the Access Point. Conductor indicates that we are operating as Access Point. monitor indicates that the AP is an Air Monitor.	column	Enumeration	`.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.3`
wlsrCurrentChannel The current operating frequency channel of the DSSS PHY.	column	Integer32	`.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.4`
wlsrTxPower Transmit power of the Access point. The value is between 0 ... 4	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.5`
wlsrRTSThreshold This attribute shall indicate the number of octets in an MPDU, below which an RTS/CTS handshake shall not be performed.	column	Integer32	`.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.6`
wlsrRetryLimit This attribute shall indicate the maximum number of transmission attempts of a frame, the length of which is less than or equal to dot11RTSThreshold, that shall be made before a f…	column	Integer32	`.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.7`
wlsrPreamble The current radio preamble type in use by the wifi interface.	column	Enumeration	`.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.8`
wlsrBeaconInterval This object shall specify the number of TU that a station shall use for scheduling Beacon transmissions. This value is transmitted in Beacon and Probe Response frames.	column	Integer32	`.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.9`