wlsrMode
WLSR-AP-MIB ·
.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.3
Object
column
Enumeration
Mode of the Access Point. Conductor indicates that we are operating as Access Point. monitor indicates that the AP is an Air Monitor.
Context
- MIB
- WLSR-AP-MIB
- OID
.1.3.6.1.4.1.14823.2.3.1.1.1.1.1.3- Type
- column
- Access
- readonly
- Status
- current
- Parent
- wlsrConfigEntry
- Table
- wlsrConfigTable
- Siblings
- 25
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | conductor |
2 | adhoc |
3 | monitor |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wlsrBSSID BSSID of the WIFI Interface | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.1 |
| wlsrPowerMgmt This attribute indicates whether Power Management is enabled
or not. | column | Enumeration | .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.10 |
| wlsrLoadBalance This attribute indicates if load balancing is enabled or disabled. | column | Enumeration | .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.11 |
| wlsrSupportedRates Basic Bit rates supported by this WIFI interface. | column | Bits | .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.12 |
| wlsrDTIMPeriod This attribute shall specify the number of beacon
intervals that shall elapse between transmission of
Beacons frames containing a TIM element whose DTIM
Count field is 0. This val… | column | Integer32 | .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.13 |
| wlsrLMSAddress This attribute indicates the IP Address of the Local
switch that the AP is connected to. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.14 |
| wlsrEncryption This attribute indicates the Encryption type of the WIFI interface. | column | Bits | .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.15 |
| wlsrStatus This attribute indicates the status of the WIFI Interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.17 |
| wlsrAgeout This attribute indicates the ageout value in seconds. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.18 |
| wlsrMTU This attribute indicates the MTU of the WIFI Interface. | column | Integer32 | .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.19 |
| wlsrESSID ESSID of the WIFI Interface | column | OctetString | .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.2 |
| wlsrLocation This attribute indicates the Location of the Access Point in
Building.Floor.location format. | column | OctetString | .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.20 |
| wlsrHideSSID This attribute indicates if SSID is hidden or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.21 |
| wlsrDenyBroadcast A True value indicates that Broadcast is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.22 |
| wlsrBGmode This attributes indicates the mode of the WIFI Interface | column | Enumeration | .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.23 |
| wlsrCardType Indicates the type of the radio card. | column | Enumeration | .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.24 |
| wlsrRegDomain deprecated This Object represents the configured Regulatory Domain this AP
will adhere to.
1 -- US
2 -- JAPAN
3 -- EU
4 -- EU2
5 -- EU3
6 -- KOREA
7 -- CHINA
8 -- France
9 -- Singapore
10 -… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.25 |
| wlsrCountryCode This Object represents the configured Country code . | column | OctetString | .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.26 |
| wlsrTxRates Transmit Bit rates supported by this WIFI interface. | column | Bits | .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.27 |
| wlsrCurrentChannel The current operating frequency channel of the DSSS PHY. | column | Integer32 | .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.4 |
| wlsrTxPower Transmit power of the Access point. The value is between 0 ... 4 | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.5 |
| wlsrRTSThreshold This attribute shall indicate the number of octets in an MPDU,
below which an RTS/CTS handshake shall not be performed. | column | Integer32 | .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.6 |
| wlsrRetryLimit This attribute shall indicate the maximum number of
transmission attempts of a frame, the length of which is less
than or equal to dot11RTSThreshold, that shall be made before a
f… | column | Integer32 | .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.7 |
| wlsrPreamble The current radio preamble type in use by the wifi interface. | column | Enumeration | .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.8 |
| wlsrBeaconInterval This object shall specify the number of TU that a station shall
use for scheduling Beacon transmissions. This value is transmitted
in Beacon and Probe Response frames. | column | Integer32 | .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.9 |