wingCfgSmartRfChrSnrThresholdA
WING-MIB ·
.0.50.1.3.9.1.1.41
Object
column
r/w
dB Unsigned32
The signal to noise ratio below which coverage recovery is
initiated for 5GHz radios.
XPath: /wing-config/smart_rf_policy[name=key1]/chr_snr_threshold_a
Context
- MIB
- WING-MIB
- OID
.0.50.1.3.9.1.1.41- Type
- column
- Access
- readwrite
- Status
- current
- Units
- dB
- Parent
- wingCfgSmartRfEntry
- Table
- wingCfgSmartRfTable
- Siblings
- 46
Syntax
dB Unsigned32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wingCfgSmartRfName XPath: /wing-config/smart_rf_policy[name=key1]/name | column | WingIdentifier | .0.50.1.3.9.1.1.1 |
| wingCfgSmartRfChannelWidthA Channel width that Smart-RF should assign to 5GHz radios
Values:
20MHz
40MHz
auto
XPath: /wing-config/smart_rf_policy[name=key1]/channel_width_a | column | SNMPv2-TCDisplayString | .0.50.1.3.9.1.1.10 |
| wingCfgSmartRfChannelWidthBg Channel width that Smart-RF should assign to 2.4GHz radios
Values:
20MHz
40MHz
auto
XPath: /wing-config/smart_rf_policy[name=key1]/channel_width_bg | column | SNMPv2-TCDisplayString | .0.50.1.3.9.1.1.11 |
| wingCfgSmartRfGroupByArea Perform grouping of radios by area.
XPath: /wing-config/smart_rf_policy[name=key1]/group_by_area | column | SNMPv2-TCTruthValue | .0.50.1.3.9.1.1.12 |
| wingCfgSmartRfGroupByFloor Perform grouping of radios by floor.
XPath: /wing-config/smart_rf_policy[name=key1]/group_by_floor | column | SNMPv2-TCTruthValue | .0.50.1.3.9.1.1.13 |
| wingCfgSmartRfSmartOcsMonitoring Perform off channel scanning to perform recoveries.
XPath: /wing-config/smart_rf_policy[name=key1]/smart_ocs_monitoring | column | SNMPv2-TCTruthValue | .0.50.1.3.9.1.1.14 |
| wingCfgSmartRfOcsDurationA Duration in milliseconds to spend off-channel for 5GHz radios.
XPath: /wing-config/smart_rf_policy[name=key1]/ocs_duration_a | column | milliseconds Unsigned32 | .0.50.1.3.9.1.1.15 |
| wingCfgSmartRfOcsDurationBg Duration in milliseconds to spend off-channel for
2.4GHz radios.
XPath: /wing-config/smart_rf_policy[name=key1]/ocs_duration_bg | column | milliseconds Unsigned32 | .0.50.1.3.9.1.1.16 |
| wingCfgSmartRfOcsFrequencyA Frequency at which off channel scanning has to be performed
for 5GHz radios.
XPath: /wing-config/smart_rf_policy[name=key1]/ocs_frequency_a | column | seconds Unsigned32 | .0.50.1.3.9.1.1.17 |
| wingCfgSmartRfOcsFrequencyBg Frequency at which off channel scanning has to be performed
for 2.4GHz radios.
XPath: /wing-config/smart_rf_policy[name=key1]/ocs_frequency_bg | column | seconds Unsigned32 | .0.50.1.3.9.1.1.18 |
| wingCfgSmartRfOcsSampleCountA Number of samples to take during off channel scan for
5GHz radios.
XPath: /wing-config/smart_rf_policy[name=key1]/ocs_sample_count_a | column | Unsigned32 | .0.50.1.3.9.1.1.19 |
| wingCfgSmartRfOcsSampleCountBg Number of samples to take during off channel scan for
2.4GHz radios.
XPath: /wing-config/smart_rf_policy[name=key1]/ocs_sample_count_bg | column | Unsigned32 | .0.50.1.3.9.1.1.20 |
| wingCfgSmartRfOcsExtendedScanFrequencyA Frequency at which an extended scan has to be performed on
5GHz radios instead of a normal neighbor only scan.
XPath: /wing-config/smart_rf_policy[name=key1]/ocs_ex… | column | Unsigned32 | .0.50.1.3.9.1.1.21 |
| wingCfgSmartRfOcsExtendedScanFrequencyBg Frequency at which an extended scan has to be performed on
2.4GHz radios instead of a normal neighbor only scan.
XPath: /wing-config/smart_rf_policy[name=key1]/ocs_… | column | Unsigned32 | .0.50.1.3.9.1.1.22 |
| wingCfgSmartRfOcsVoiceAwareA Voice awareness setting during off channel scan for
5GHz radios
Values:
dynamic
strict
disable
XPath: /wing-config/smart_rf_policy[name=key1]/ocs_voi… | column | SNMPv2-TCDisplayString | .0.50.1.3.9.1.1.23 |
| wingCfgSmartRfOcsVoiceAwareBg Voice awareness setting during off channel scan for
2.4GHz radios
Values:
dynamic
strict
disable
XPath: /wing-config/smart_rf_policy[name=key1]/ocs_v… | column | SNMPv2-TCDisplayString | .0.50.1.3.9.1.1.24 |
| wingCfgSmartRfOcsPspAwareA PSP awareness setting during off channel scan for 5GHz radios
Values:
dynamic
strict
disable
XPath: /wing-config/smart_rf_policy[name=key1]/ocs_psp_a… | column | SNMPv2-TCDisplayString | .0.50.1.3.9.1.1.25 |
| wingCfgSmartRfOcsPspAwareBg PSP awareness setting during off channel scan for
2.4GHz radios
Values:
dynamic
strict
disable
XPath: /wing-config/smart_rf_policy[name=key1]/ocs_psp… | column | SNMPv2-TCDisplayString | .0.50.1.3.9.1.1.26 |
| wingCfgSmartRfInterferenceRecovery Recover issues due to excessive noise and interference.
XPath: /wing-config/smart_rf_policy[name=key1]/interference_recovery | column | SNMPv2-TCTruthValue | .0.50.1.3.9.1.1.27 |
| wingCfgSmartRfIrNoise Take noise into consideration while performing interference
recovery.
XPath: /wing-config/smart_rf_policy[name=key1]/ir_noise | column | SNMPv2-TCTruthValue | .0.50.1.3.9.1.1.28 |
| wingCfgSmartRfIrInterference Take external interference into consideration while performing
interference recovery.
XPath: /wing-config/smart_rf_policy[name=key1]/ir_interference | column | SNMPv2-TCTruthValue | .0.50.1.3.9.1.1.29 |
| wingCfgSmartRfEnable XPath: /wing-config/smart_rf_policy[name=key1]/enable | column | SNMPv2-TCTruthValue | .0.50.1.3.9.1.1.3 |
| wingCfgSmartRfIrClientThreshold Number of associated clients after which channel change due to
interference recovery is not allowed.
XPath: /wing-config/smart_rf_policy[name=key1]/ir_client_thresh… | column | Unsigned32 | .0.50.1.3.9.1.1.30 |
| wingCfgSmartRfIrChannelSwitchDeltaA Difference in interference between current channel and
the best possible channel to perform a channel switch on
5GHz radios
XPath: /wing-config/smart_rf_policy[name… | column | dBm Unsigned32 | .0.50.1.3.9.1.1.31 |
| wingCfgSmartRfIrChannelSwitchDeltaBg Difference in interference between current channel and
the best possible channel to perform a channel switch on
2.4GHz radios
XPath: /wing-config/smart_rf_policy[na… | column | dBm Unsigned32 | .0.50.1.3.9.1.1.32 |
| wingCfgSmartRfNeighborRecovery Recover issues due to faulty neighbor radios.
XPath: /wing-config/smart_rf_policy[name=key1]/neighbor_recovery | column | SNMPv2-TCTruthValue | .0.50.1.3.9.1.1.33 |
| wingCfgSmartRfNrPowerThresholdA Power threshold to be used while performing neighbor recovery
on 5GHz radios.
XPath: /wing-config/smart_rf_policy[name=key1]/nr_power_threshold_a | column | dBm Integer32 | .0.50.1.3.9.1.1.34 |
| wingCfgSmartRfNrPowerThresholdBg Power threshold to be used while performing neighbor recovery
on 2.4GHz radios.
XPath: /wing-config/smart_rf_policy[name=key1]/nr_power_threshold_bg | column | dBm Integer32 | .0.50.1.3.9.1.1.35 |
| wingCfgSmartRfCoverageHoleRecovery Recover from coverage hole.
XPath: /wing-config/smart_rf_policy[name=key1]/coverage_hole_recovery | column | SNMPv2-TCTruthValue | .0.50.1.3.9.1.1.36 |
| wingCfgSmartRfChrIntervalA Interval at which coverage-hole-recovery should be performed
for 5GHz radios.
XPath: /wing-config/smart_rf_policy[name=key1]/chr_interval_a | column | seconds Unsigned32 | .0.50.1.3.9.1.1.37 |
| wingCfgSmartRfChrIntervalBg Interval at which coverage-hole-recovery should be performed
for 2.4GHz radios.
XPath: /wing-config/smart_rf_policy[name=key1]/chr_interval_bg | column | seconds Unsigned32 | .0.50.1.3.9.1.1.38 |
| wingCfgSmartRfChrCovIntervalA Interval at which coverage-hole-recovery should be performed
after coverage hole is discovered for 5GHz radios.
XPath: /wing-config/smart_rf_policy[name=key1]/chr_c… | column | seconds Unsigned32 | .0.50.1.3.9.1.1.39 |
| wingCfgSmartRfSensitivity choose smart-rf sensitivity settings, modifies configuration
parameters to preset values.
Values:
low
medium
high
custom
XPath: /wing-config/smart_rf… | column | SNMPv2-TCDisplayString | .0.50.1.3.9.1.1.4 |
| wingCfgSmartRfChrCovIntervalBg Interval at which coverage-hole-recovery should be performed
after coverage hole is discovered for 2.4GHz radios.
XPath: /wing-config/smart_rf_policy[name=key1]/chr… | column | seconds Unsigned32 | .0.50.1.3.9.1.1.40 |
| wingCfgSmartRfChrSnrThresholdBg The signal to noise ratio below which coverage recovery is
initiated for 2.4GHz radios.
XPath: /wing-config/smart_rf_policy[name=key1]/chr_snr_threshold_bg | column | dB Unsigned32 | .0.50.1.3.9.1.1.42 |
| wingCfgSmartRfChrClientThresholdA Minimum number of clients below SNR threhold required for
coverage hole recovery on 5GHz radios.
XPath: /wing-config/smart_rf_policy[name=key1]/chr_client_threshold… | column | Unsigned32 | .0.50.1.3.9.1.1.43 |
| wingCfgSmartRfChrClientThresholdBg Minimum number of clients below SNR threhold required for
coverage hole recovery on 2.4GHz radios.
XPath: /wing-config/smart_rf_policy[name=key1]/chr_client_thresho… | column | Unsigned32 | .0.50.1.3.9.1.1.44 |
| wingCfgSmartRfChannelHoldTime The minimum time between two channel changes on a radio
during interference recovery.
XPath: /wing-config/smart_rf_policy[name=key1]/channel_hold_time | column | seconds Unsigned32 | .0.50.1.3.9.1.1.45 |
| wingCfgSmartRfPowerHoldTime The minimum time between two power changes on a radio during
neighbor recovery.
XPath: /wing-config/smart_rf_policy[name=key1]/power_hold_time | column | seconds Unsigned32 | .0.50.1.3.9.1.1.46 |
| wingCfgSmartRfOcsMeshpointA Meshpoint to be monitored during off channel scan for 5GHz radios
XPath: /wing-config/smart_rf_policy[name=key1]/ocs_meshpoint_a | column | OctetString | .0.50.1.3.9.1.1.47 |
| wingCfgSmartRfOcsMeshpointBg Meshpoint to be monitored during off channel scan for 2.4GHz radios
XPath: /wing-config/smart_rf_policy[name=key1]/ocs_meshpoint_bg | column | OctetString | .0.50.1.3.9.1.1.48 |
| wingCfgSmartRfAutoAssignSensor smart-rf automatically assigns optimal sensors for wips and
rogue ap detection.
XPath: /wing-config/smart_rf_policy[name=key1]/auto_assign_sensor | column | SNMPv2-TCTruthValue | .0.50.1.3.9.1.1.5 |
| wingCfgSmartRfMinPowerA Minimum assignable power on 5GHz radios
XPath: /wing-config/smart_rf_policy[name=key1]/min_power_a | column | dBm Unsigned32 | .0.50.1.3.9.1.1.6 |
| wingCfgSmartRfMaxPowerA Maximum assignable power on 5GHz radios
XPath: /wing-config/smart_rf_policy[name=key1]/max_power_a | column | dBm Unsigned32 | .0.50.1.3.9.1.1.7 |
| wingCfgSmartRfMinPowerBg Minimum assignable power on 2.4GHz radios
XPath: /wing-config/smart_rf_policy[name=key1]/min_power_bg | column | dBm Unsigned32 | .0.50.1.3.9.1.1.8 |
| wingCfgSmartRfMaxPowerBg Maximum assignable power on 2.4GHz radios
XPath: /wing-config/smart_rf_policy[name=key1]/max_power_bg | column | dBm Unsigned32 | .0.50.1.3.9.1.1.9 |