wingCfgDevIfRadioNonUnicastForwarding
WING-MIB ·
.0.50.1.3.18.3.5.1.17
Object
Whether broadcast and multicast packets should always follow
DTIM, or do so only if some wireless clients are in
power-save mode.
Values:
follow-dtim
power-save-aware
XPath: /wing-config/device[mac=key1]/interface[name=key2]/non_unicast_forwarding
Context
- MIB
- WING-MIB
- OID
.0.50.1.3.18.3.5.1.17- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- wingCfgDevIfRadioEntry
- Table
- wingCfgDevIfRadioTable
- Siblings
- 35
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wingCfgDevIfRadioRfMode Values:
2.4GHz-wlan
5GHz-wlan
sensor
Notes:
On a WM3400 the radio-mode of radio1 can only be 2.4|sensor.
radio2 can only be 5|sensor(so the 2.4-wlan and 5-wlan mode… | column | SNMPv2-TCDisplayString | .0.50.1.3.18.3.5.1.1 |
| wingCfgDevIfRadioAmpduMode Mode in which A-MPDU will be supported.
Values:
tx-only
rx-only
tx-rx
none
XPath: /wing-config/device[mac=key1]/interface[name=key2]/ampdu_mode | column | SNMPv2-TCDisplayString | .0.50.1.3.18.3.5.1.10 |
| wingCfgDevIfRadioAmsduMode Mode in which A-MSDU will be supported.
Values:
rx-only
tx-rx
XPath: /wing-config/device[mac=key1]/interface[name=key2]/amsdu_mode | column | SNMPv2-TCDisplayString | .0.50.1.3.18.3.5.1.11 |
| wingCfgDevIfRadioRifsMode Modes in which RIFS will be supported.
Values:
tx-only
rx-only
tx-rx
none
XPath: /wing-config/device[mac=key1]/interface[name=key2]/rifs_mode | column | SNMPv2-TCDisplayString | .0.50.1.3.18.3.5.1.12 |
| wingCfgDevIfRadioAmpduMaxAggrSizeRx Advertised maximum limit on A-MPDU aggregated received frames.
Values:
8191
16383
32767
65535
XPath: /wing-config/device[mac=key1]/interface[name=key… | column | bytes SNMPv2-TCDisplayString | .0.50.1.3.18.3.5.1.13 |
| wingCfgDevIfRadioAmpduMaxAggrSizeTx Limit on A-MPDU aggregated transmitted frames.
XPath: /wing-config/device[mac=key1]/interface[name=key2]/ampdu_max_aggr_size_tx | column | bytes Unsigned32 | .0.50.1.3.18.3.5.1.14 |
| wingCfgDevIfRadioAmpduMinSpacing Minimum gap between A-MPDU frames (in microseconds).
Values:
0
1
2
4
8
16
XPath: /wing-config/device[mac=key1]/interface[name=key2]/ampdu_min_spacing | column | microseconds SNMPv2-TCDisplayString | .0.50.1.3.18.3.5.1.15 |
| wingCfgDevIfRadioAntennaMode Number of transmit and receive antennas on the radio. 1x1 implies only the A antenna; 1x3 implies A for Tx and all three for Rx; default depends on the AP type, the type of power … | column | SNMPv2-TCDisplayString | .0.50.1.3.18.3.5.1.16 |
| wingCfgDevIfRadioDynamicChainSelection Whether the radio should dynamically change the number of
transmit chains used (use a single chain/antenna for frames
at non-11n data-rates).
XPath: /wing-config/de… | column | SNMPv2-TCTruthValue | .0.50.1.3.18.3.5.1.18 |
| wingCfgDevIfRadioLockRfMode Lock Smart RF mode of operation for this radio.
XPath: /wing-config/device[mac=key1]/interface[name=key2]/lock_rf_mode | column | SNMPv2-TCTruthValue | .0.50.1.3.18.3.5.1.19 |
| wingCfgDevIfRadioChannel Channel of operation for this radio.
Values:
1, 1+, 2, 2+, 3, 3+, 4, 4+, 5, 5+, 5-, 6, 6+, 6-, 7, 7+, 7-,
8, 8+, 8-, 9, 9+, 9-, 10, 10-, 11, 11-, 12, 12-, 13, 13-, … | column | SNMPv2-TCDisplayString | .0.50.1.3.18.3.5.1.2 |
| wingCfgDevIfRadioSnifferRedirHost Address of host to which captured packets are redirected.
XPath: /wing-config/device[mac=key1]/interface[name=key2]/sniffer_redirect/host | column | SNMPv2-TCDisplayString | .0.50.1.3.18.3.5.1.20 |
| wingCfgDevIfRadioSnifferRedirChannel Channel on which to capture packets.
Values:
1, 1+, 2, 2+, 3, 3+, 4, 4+, 5, 5+, 5-, 6, 6+, 6-, 7, 7+, 7-,
8, 8+, 8-, 9, 9+, 9-, 10, 10-, 11, 11-, 12, 12-, 13, 13-, … | column | SNMPv2-TCDisplayString | .0.50.1.3.18.3.5.1.21 |
| wingCfgDevIfRadioMesh Client operation scans for Mesh Portals, or nodes that have
connectivity to Portals, and connects through them.
Portal operation begins beaconing immediately and accepting
connec… | column | SNMPv2-TCDisplayString | .0.50.1.3.18.3.5.1.22 |
| wingCfgDevIfRadioMeshLinks Maximum number of Mesh links that this radio will attempt to
create.
XPath: /wing-config/device[mac=key1]/interface[name=key2]/mesh_links | column | Unsigned32 | .0.50.1.3.18.3.5.1.23 |
| wingCfgDevIfRadioProbeResponseRetry Whether Probe-Responses are retried on the air if they are
not acknowledged by the wireless client
XPath: /wing-config/device[mac=key1]/interface[name=key2]/probe_r… | column | SNMPv2-TCTruthValue | .0.50.1.3.18.3.5.1.24 |
| wingCfgDevIfRadioProbeResponseRate The data transmission rate used for sending Probe Responses
Values:
follow-probe-request
highest-basic
lowest-basic
XPath: /wing-config/device[mac=ke… | column | SNMPv2-TCDisplayString | .0.50.1.3.18.3.5.1.25 |
| wingCfgDevIfRadioMaxClients The maximum number of clients allowed to associate
with this radio
XPath: /wing-config/device[mac=key1]/interface[name=key2]/max_clients | column | Unsigned32 | .0.50.1.3.18.3.5.1.26 |
| wingCfgDevIfRadioRadioTapMode Radio tap mode of operation
Values:
off
inline
promiscuous
Note:
Radio tap can be enabled only on wlan radio and in 5.1,
only when another radio on A… | column | SNMPv2-TCDisplayString | .0.50.1.3.18.3.5.1.27 |
| wingCfgDevIfRadioWirelessClientPower Transmit power indicated to wireless clients for transmission.
XPath: /wing-config/device[mac=key1]/interface[name=key2]/wireless_client_power | column | dBm Unsigned32 | .0.50.1.3.18.3.5.1.28 |
| wingCfgDevIfRadioLoadBalLfCount Consider the number of Wireless Clients in determining
the load on an AP. High numbers indicate a higher weight
assigned to the criteria. 0 implies that count is
not considered.
… | column | Unsigned32 | .0.50.1.3.18.3.5.1.29 |
| wingCfgDevIfRadioPower Transmit power of the radio. A setting of 0 indicates
Smart RF is managing the power.
XPath: /wing-config/device[mac=key1]/interface[name=key2]/power | column | dBm Unsigned32 | .0.50.1.3.18.3.5.1.3 |
| wingCfgDevIfRadioLoadBalLfThroughput Consider the throughput of traffic in determining the load
on an AP. High numbers indicate a higher weight assigned
to the criteria. 0 implies that throughput is not considered.… | column | Unsigned32 | .0.50.1.3.18.3.5.1.30 |
| wingCfgDevIfRadioLoadBalWmCount The number of clients that can associate with a radio before
load-balancing would be triggered
XPath: /wing-config/device[mac=key1]/interface[name=key2]/load_balanc… | column | Unsigned32 | .0.50.1.3.18.3.5.1.31 |
| wingCfgDevIfRadioLoadBalWmTput When the average throughput of a radio exceeds this threshold
(in Mbps) load balancing would be triggered
XPath: /wing-config/device[mac=key1]/interface[name=key2]/… | column | Unsigned32 | .0.50.1.3.18.3.5.1.32 |
| wingCfgDevIfRadioAssocAcl XPath: /wing-config/device[mac=key1]/interface[name=key2]/assoc_acl | column | WingIdentifier | .0.50.1.3.18.3.5.1.33 |
| wingCfgDevIfRadioQosPolicy XPath: /wing-config/device[mac=key1]/interface[name=key2]/qos_policy | column | WingIdentifier | .0.50.1.3.18.3.5.1.34 |
| wingCfgDevIfRadioAntennaDowntilt Whether the radio should enable ADEPT antenna modes.
XPath: /wing-config/device[mac=key1]/interface[name=key2]/antenna_downtilt | column | SNMPv2-TCTruthValue | .0.50.1.3.18.3.5.1.35 |
| wingCfgDevIfRadioExtendedRange Configure extended rate selection.
Default Value
for 2.4 Ghz : 7 Kilometer
5 GHz : 2 Kilometer
XPath: /wing-config/device[mac=key1]/interface[name=key2]/extend… | column | SNMPv2-SMIUnsigned32 | .0.50.1.3.18.3.5.1.36 |
| wingCfgDevIfRadioPlacement Location where this radio is operating.
Values:
indoor
outdoor
XPath: /wing-config/device[mac=key1]/interface[name=key2]/placement | column | SNMPv2-TCDisplayString | .0.50.1.3.18.3.5.1.4 |
| wingCfgDevIfRadioBeaconInterval Interval between radio beacons.
Values:
50
100
200
XPath: /wing-config/device[mac=key1]/interface[name=key2]/beacon_interval | column | milliseconds SNMPv2-TCDisplayString | .0.50.1.3.18.3.5.1.5 |
| wingCfgDevIfRadioRtsThreshold Ready to Send threshold on this radio.
XPath: /wing-config/device[mac=key1]/interface[name=key2]/rts_threshold | column | bytes Unsigned32 | .0.50.1.3.18.3.5.1.6 |
| wingCfgDevIfRadioOffChannelScan Enable off-channel scanning on this radio.
XPath: /wing-config/device[mac=key1]/interface[name=key2]/off_channel_scan | column | SNMPv2-TCTruthValue | .0.50.1.3.18.3.5.1.7 |
| wingCfgDevIfRadioPreambleShort Configure use of short preamble.
XPath: /wing-config/device[mac=key1]/interface[name=key2]/preamble_short | column | SNMPv2-TCTruthValue | .0.50.1.3.18.3.5.1.8 |
| wingCfgDevIfRadioGuardInterval 802.11n guard interval.
Values:
any
long
XPath: /wing-config/device[mac=key1]/interface[name=key2]/guard_interval | column | SNMPv2-TCDisplayString | .0.50.1.3.18.3.5.1.9 |