redirectorBytesReceivedPerSec
WINDOWS-NT-PERFORMANCE ·
.1.3.6.1.4.1.311.1.1.3.1.1.8.4
Object
scalar
mandatory
Integer32
Bytes Received/sec is the rate of bytes coming in to the Redirector from the network. It includes all application data as well as network protocol information (such as packet headers.)
Context
- MIB
- WINDOWS-NT-PERFORMANCE
- OID
.1.3.6.1.4.1.311.1.1.3.1.1.8.4- Type
- scalar
- Access
- readonly
- Status
- mandatory
- Parent
- redirector
- Siblings
- 36
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| redirectorBytesTotalPerSec mandatory Bytes Total/sec is the rate the Redirector is processing data bytes. This includes all application and file data in addition to protocol information such as packet headers. | scalar | Integer32 | .1.3.6.1.4.1.311.1.1.3.1.1.8.1 |
| redirectorBytesTransmittedPerSec mandatory Bytes Transmitted/sec is the rate that bytes are leaving the Redirector to the network. It includes all application data as well as network protocol information (such as packet h… | scalar | Integer32 | .1.3.6.1.4.1.311.1.1.3.1.1.8.10 |
| redirectorPacketsTransmittedPerSec mandatory Packets Transmitted/sec is the rate that the Redirector is sending packets (also called SMBs or Server Message Blocks). Network transmissions are divided into packets. The avera… | scalar | Integer32 | .1.3.6.1.4.1.311.1.1.3.1.1.8.11 |
| redirectorWriteBytesPagingPerSec mandatory Write Bytes Paging/sec is the rate that the Redirector is attempting to write bytes changed in the pages being used by applications. The program data changed by modules (such as … | scalar | Integer32 | .1.3.6.1.4.1.311.1.1.3.1.1.8.12 |
| redirectorWriteBytesNon-PagingPerSec mandatory Write Bytes Non-Paging/sec is the rate of the bytes that are written by the Redirector in response to normal file outputs by an application when they are redirected to go to anoth… | scalar | Integer32 | .1.3.6.1.4.1.311.1.1.3.1.1.8.13 |
| redirectorWriteBytesCachePerSec mandatory Write Bytes Cache/sec is the rate that applications on your computer are writing to the Cache using the Redirector. The data may not leave your computer immediately, but may be r… | scalar | Integer32 | .1.3.6.1.4.1.311.1.1.3.1.1.8.14 |
| redirectorWriteBytesNetworkPerSec mandatory Write Bytes Network/sec is the rate that your applications are writing data across the network. Either the system Cache was bypassed, as for Named Pipes or Transactions, or else … | scalar | Integer32 | .1.3.6.1.4.1.311.1.1.3.1.1.8.15 |
| redirectorFileReadOperationsPerSec mandatory File Read Operations/sec is the rate that applications are asking the Redirector for data. Each call to a file system or similar Application Program Interface (API) call counts a… | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.311.1.1.3.1.1.8.16 |
| redirectorReadOperationsRandomPerSec mandatory Read Operations Random/sec counts the rate that, on a file-by-file basis, reads are made that are not sequential. If a read is made using a particular file handle, and then is fo… | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.311.1.1.3.1.1.8.17 |
| redirectorReadPacketsPerSec mandatory Read Packets/sec is the rate that read packets are being placed on the network. Each time a single packet is sent with a request to read data remotely, this counter is incremente… | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.311.1.1.3.1.1.8.18 |
| redirectorReadsLargePerSec mandatory Reads Large/sec is the rate that reads over 2 times the server's negotiated buffer size are made by applications. Too many of these could place a strain on server resources. Thi… | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.311.1.1.3.1.1.8.19 |
| redirectorFileDataOperationsPerSec mandatory File Data Operations/sec is the rate the Redirector is processing data operations. One operation includes (hopefully) many bytes. We say hopefully here because each operation ha… | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.311.1.1.3.1.1.8.2 |
| redirectorReadPacketsSmallPerSec mandatory Read Packets Small/sec is the rate that reads less than one-fourth of the server's negotiated buffer size are made by applications. Too many of these could indicate a waste of bu… | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.311.1.1.3.1.1.8.20 |
| redirectorFileWriteOperationsPerSec mandatory File Write Operations/sec is the rate that applications are sending data to the Redirector. Each call to a file system or similar Application Program Interface (API) call counts … | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.311.1.1.3.1.1.8.21 |
| redirectorWriteOperationsRandomPerSec mandatory Write Operations Random/sec is the rate that, on a file-by-file basis, writes are made that are not sequential. If a write is made using a particular file handle, and then is fol… | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.311.1.1.3.1.1.8.22 |
| redirectorWritePacketsPerSec mandatory Write Packets/sec is the rate that writes are being sent to the network. Each time a single packet is sent with a request to write remote data, this counter is incremented by one. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.311.1.1.3.1.1.8.23 |
| redirectorWritesLargePerSec mandatory Writes Large/sec is the rate that writes are made by applications that are over 2 times the server's negotiated buffer size. Too many of these could place a strain on server reso… | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.311.1.1.3.1.1.8.24 |
| redirectorWritePacketsSmallPerSec mandatory Write Packets Small/sec is the rate that writes are made by applications that are less than one-fourth of the server's negotiated buffer size. Too many of these could indicate a … | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.311.1.1.3.1.1.8.25 |
| redirectorReadsDeniedPerSec mandatory Reads Denied/sec is the rate that the server is unable to accommodate requests for Raw Reads. When a read is much larger than the server's negotiated buffer size, the Redirector … | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.311.1.1.3.1.1.8.26 |
| redirectorWritesDeniedPerSec mandatory Writes Denied/sec is the rate that the server is unable to accommodate requests for Raw Writes. When a write is much larger than the server's negotiated buffer size, the Redirect… | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.311.1.1.3.1.1.8.27 |
| redirectorNetworkErrorsPerSec mandatory Network Errors/sec counts serious unexpected errors that generally indicate the Redirector and one or more Servers are having serious communication difficulties. For example an S… | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.311.1.1.3.1.1.8.28 |
| redirectorServerSessions mandatory Server Sessions counts the total number of security objects the Redirector has managed. For example, a Logon to a server followed by a network access to the same server will esta… | scalar | Integer32 | .1.3.6.1.4.1.311.1.1.3.1.1.8.29 |
| redirectorPacketsPerSec mandatory Packets/sec is the rate the Redirector is processing data packets. One packet includes (hopefully) many bytes. We say hopefully here because each packet has protocol overhead. … | scalar | Integer32 | .1.3.6.1.4.1.311.1.1.3.1.1.8.3 |
| redirectorServerReconnects mandatory Server Reconnects counts the number of times your Redirector has had to reconnect to a server in order to complete a new active request. You can be disconnected by the Server if … | scalar | Integer32 | .1.3.6.1.4.1.311.1.1.3.1.1.8.30 |
| redirectorConnectsCore mandatory Connects Core counts the number of connections you have to servers running the original MS-Net SMB protocol, including MS-Net itself and Xenix and Vax's. | scalar | Integer32 | .1.3.6.1.4.1.311.1.1.3.1.1.8.31 |
| redirectorConnectsLanManager20 mandatory Connects Lan Manager 2.0 counts connections to Lan Manager 2.0 servers, including LMX servers. | scalar | Integer32 | .1.3.6.1.4.1.311.1.1.3.1.1.8.32 |
| redirectorConnectsLanManager21 mandatory Connects Lan Manager 2.1 counts connections to Lan Manager 2.1 servers, including LMX servers. | scalar | Integer32 | .1.3.6.1.4.1.311.1.1.3.1.1.8.33 |
| redirectorConnectsWindowsNT mandatory Connects Windows NT counts the connections to Windows NT computers. Good choice! | scalar | Integer32 | .1.3.6.1.4.1.311.1.1.3.1.1.8.34 |
| redirectorServerDisconnects mandatory Server Disconnects counts the number of times a Server has disconnected your Redirector. See also Server Reconnects. | scalar | Integer32 | .1.3.6.1.4.1.311.1.1.3.1.1.8.35 |
| redirectorServerSessionsHung mandatory Server Sessions Hung counts the number of active sessions that are timed out and unable to proceed due to a lack of response from the remote server. | scalar | Integer32 | .1.3.6.1.4.1.311.1.1.3.1.1.8.36 |
| redirectorCurrentCommands mandatory Current Commands counts the number of requests to the Redirector that are currently queued for service. If this number is much larger than the number of network adapter cards ins… | scalar | Integer32 | .1.3.6.1.4.1.311.1.1.3.1.1.8.37 |
| redirectorPacketsReceivedPerSec mandatory Packets Received/sec is the rate that the Redirector is receiving packets (also called SMBs or Server Message Blocks). Network transmissions are divided into packets. The averag… | scalar | Integer32 | .1.3.6.1.4.1.311.1.1.3.1.1.8.5 |
| redirectorReadBytesPagingPerSec mandatory Read Bytes Paging/sec is the rate that the Redirector is attempting to read bytes in response to page faults. Page faults are caused by loading of modules (such as programs and l… | scalar | Integer32 | .1.3.6.1.4.1.311.1.1.3.1.1.8.6 |
| redirectorReadBytesNon-PagingPerSec mandatory Read Bytes Non-Paging/sec are those bytes read by the Redirector in response to normal file requests by an application when they are redirected to come from another computer. In … | scalar | Integer32 | .1.3.6.1.4.1.311.1.1.3.1.1.8.7 |
| redirectorReadBytesCachePerSec mandatory Read Bytes Cache/sec is the rate that applications on your computer are accessing the Cache using the Redirector. Some of these data requests may be satisfied by merely retrievin… | scalar | Integer32 | .1.3.6.1.4.1.311.1.1.3.1.1.8.8 |
| redirectorReadBytesNetworkPerSec mandatory Read Bytes Network/sec is the rate that applications are reading data across the network. For one reason or another the data was not in the system Cache, and these bytes actually… | scalar | Integer32 | .1.3.6.1.4.1.311.1.1.3.1.1.8.9 |