userDefinedPort2

WHISP-SM-MIB · .1.3.6.1.4.1.161.19.3.2.1.46
MIB view Table view

Object

scalar obsolete r/w Integer32 
An integer value of number two user defined port. Range:0-65535
Obsolete - Use corresponding OID in whipsBoxConfig MIB.

Context

MIB
WHISP-SM-MIB
OID
.1.3.6.1.4.1.161.19.3.2.1.46
Type
scalar
Access
readwrite
Status
obsolete
Parent
whispSmConfig
Siblings
156

Syntax

Integer32
Source
COPS-PR-SPPIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rfScanList
RF scan list string. The frequencies vary by product and region. If the frequency list is too long an SNMP error will be returned. If this occurs please refer to OID rfScanListTa…
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.1.1
timingPulseGated
0 - Disable (Always propagate the frame timing pulse). 1 - Enable (If SM out of sync then dont propagate the frame timing pulse).
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.10
colorCodepriority3 deprecated
Priority setting for the third color code. The variable is deprecated. See additionalColorCodePriority in whispSmConfig.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.100
colorCode4 deprecated
Fourth Color code. The variable is deprecated. See additionalColorCode in whispSmConfig.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.101
colorCodepriority4 deprecated
Priority setting for the fourth color code. The variable is deprecated. See additionalColorCodePriority in whispSmConfig.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.102
colorCode5 deprecated
Fifth Color code. The variable is deprecated. See additionalColorCode in whispSmConfig.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.103
colorCodepriority5 deprecated
Priority setting for the fifth color code. The variable is deprecated. See additionalColorCodePriority in whispSmConfig.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.104
colorCode6 deprecated
Sixth Color code. The variable is deprecated. See additionalColorCode in whispSmConfig.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.105
colorCodepriority6 deprecated
Priority setting for the sixth color code. The variable is deprecated. See additionalColorCodePriority in whispSmConfig.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.106
colorCode7 deprecated
Seventh Color code. The variable is deprecated. See additionalColorCode in whispSmConfig.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.107
colorCodepriority7 deprecated
Priority setting for the seventh color code. The variable is deprecated. See additionalColorCodePriority in whispSmConfig.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.108
colorCode8 deprecated
Eighth Color code. The variable is deprecated. See additionalColorCode in whispSmConfig.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.109
naptPrivateIP
NAPT private IP address. Only the first three bytes can be changed when NAPT is enabled.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.2.1.11
colorCodepriority8 deprecated
Priority setting for the eighth color code. The variable is deprecated. See additionalColorCodePriority in whispSmConfig.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.110
colorCode9 deprecated
Ninth Color code. The variable is deprecated. See additionalColorCode in whispSmConfig.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.111
colorCodepriority9 deprecated
Priority setting for the ninth color code. The variable is deprecated. See additionalColorCodePriority in whispSmConfig.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.112
colorCode10 deprecated
Tenth Color code. The variable is deprecated. See additionalColorCode in whispSmConfig.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.113
colorCodepriority10 deprecated
Priority setting for the tenth color code. The variable is deprecated. See additionalColorCodePriority in whispSmConfig.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.114
natDNSProxyEnable
If enabled, the SM will advertise itself as the DNS server when it sends out DHCP client leases and forward DNS queries automatically. If disabled, the SM will forward on upstream…
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.115
allIpv4Filter obsolete
To set all IPv4 packet filter when NAT is disabled. Enabling this will automatically enable all of the known IP filters (SMB, SNMP, Bootp, IPv4 Mcast, User Defined Ports, and All…
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.116
spectrumAnalysisDisplay
The display for Spectrum Analyzer: (0) - Averaging over entire period (1) - Instantaneous showing the last reading
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.117
syslogSMXmitSetting deprecated
Obtains Syslog transmit configuration from AP/BHM if set to 0, overrides if 1 or 2. Transmits syslog data to Syslog server if enabled(1), stops if disabled (2).
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.118
syslogServerApPreferred
Uses Syslog server configuration from AP/BHM if enabled and available, otherwise uses local configuration.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.119
naptPrivateSubnetMask
NAPT private subnet mask. Only the last byte can be changed when NAPT is enabled. The address will always be: 255.255.255.x.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.2.1.12
syslogMinLevelApPreferred
Uses Syslog minimum transmit level configuration from AP/BHM if available, otherwise uses local configuration.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.120
syslogSMXmitControl
Obtains Syslog transmit configuration from AP/BHM if available, or specifies the local transmit state.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.121
eapPeerAAAServerCommonName
THIS OID IS CURRENTLY UNUSED: EAP Peer Server Common Name
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.1.126
rfScanListBandFilter obsolete
This element is obsolete.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.127
upLnkMaxBurstDataRate
Maximum burst uplink rate.
scalarKilobits/sec Integer32.1.3.6.1.4.1.161.19.3.2.1.128
dwnLnkMaxBurstDataRate
Maximum burst downlink rate.
scalarKilobits/sec Integer32.1.3.6.1.4.1.161.19.3.2.1.129
naptPublicIP
IP Address of NAPT Public Interface. The variable is available only when NAPT is enabled.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.2.1.13
cyclicPrefixScan
Cyclic Prefix value for frequency scanning used by MIMO SMs only. When setting use a comma delimited list of cyclic prefixes with no spaces. For example: 1/8,1/16
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.1.130
bandwidthScan
Bandwidth values for frequency scanning used by MIMO SMs only. When setting use a comma delimited list of bandwidths. For example: 10, 20
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.1.131
apSelection
This OID affects what AP to attempt to register to when Canopy SMs scan see more than one AP that are valid in it's configuration. (0) - Default, Canopy radios after scanning sele…
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.132
radioBandscanConfig
Used to determine when frequency, cyclic prefix and bandwidth settings take effect for band scanning MIMO SMs. 0 - Instant 1 - Delayed 2 - Apply changes
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.133
forcepoweradjust
This will force a multipoint SM to initiate an asynchronous power adjust sequence. This is done automatically every 2 minutes.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.134
clearBerrResults
This will clear the BER results.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.135
berrautoupdateflag
This indicates if the once a second BERR updating of counters is enabled. 1 = enabled 0 = disabled
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.136
testSMBER
0 - Disable (Return the SM to a normal operation state). 1 - Enable (Set SM into a BER test state).
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.137
allowedIPAccessNMLength1
Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.138
allowedIPAccessNMLength2
Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.139
naptPublicSubnetMask
Subnet mask for NAPT Public Interface. The variable is available only when NAPT is enabled.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.2.1.14
allowedIPAccessNMLength3
Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.140
naptRemoteManage
To enable or disable Remote Management. For multipoint only. 0=Disable Remote Management, 1=Enable - Standalone Config, 2=Enable - Use WAN Interface.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.141
spectrumAnalysisScanBandwidth
Scanning Bandwidth used for the Spectrum Analyzer. Only available on PMP 450.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.142
berDeModSelect
The BER demodulation level the SM is set. 0 for QPSK, 1 for 16-QAM, 2 for 64-QAM, and 3 for 256-QAM.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.143
multicastVCRcvRate
Multicast VC Receive Rate
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.1.144
pmp430ApRegistrationOptions deprecated
Deprecated. The 430 SM only supports PMP 450 interoperability mode.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.145
switchRadioModeAndReboot obsolete
As of 14.2, the 430 SM no longer supports multiple radio modes. It only support 450 interoperability mode.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.146
natTslTableSize
NAT Translation Table Size. Range 1024-8192.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.147
ingressVIDPriority
ingress VID VLAN Priority.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.148
ingressVIDPriorityMode
ingress VID VLAN Priority Mode.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.149
naptPublicGatewayIP
IP Address of NAPT Public Interface Gateway. The variable is available only when NAPT is enabled.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.2.1.15
providerVIDPriority
Provider VID VLAN Priority.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.150
providerVIDPriorityMode
Provider VID VLAN Priority Mode.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.151
additionalColorCode
Add an additional color code. Setting additionalColorCode and additionalColorCodePriority adds an entry.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.152
additionalColorCodePriority
Add an additional color code priority. Setting additionalColorCode and additionalColorCodePriority adds an entry.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.153
deleteAdditionalColorCode
Delete an additional color code.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.154
bCastMIRUnits
Units of Broadcast/ Multicast MIR value. Set units first and then bCastMIR
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.155
rfScanListTable
The list of configured scanning frequencies on the SM or BHS.
table-.1.3.6.1.4.1.161.19.3.2.1.156
txPowerControl
Enable/Disable Automatic control of SM TX power. Engineering use only.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.157
bridgeTableSize
Bridge Table Size : 4 -- 4096.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.158
bridgeTableRestrict
Restrict forwarding packets from hosts for which MAC address is not in the bridge table.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.159
naptRFPublicIP
IP Address of RF Public Interface. The variable is available only when NAPT is enabled.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.2.1.16
maxTxPowerEnable
Enable Max Tx Power configuration. This is used with OID maxTxPower to set the max transmit power. This might be required in certain regions and frequency bands. See User Guide fo…
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.160
maxTxPower
This OID is controled by OID maxTxPowerEnable. This might be required in certain regions and frequency bands. See user guide for more information. Setting this will not allow a ra…
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.161
naptRFPublicSubnetMask
Subnet mask of RF Public Interface. The variable is available only when NAPT is enabled.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.2.1.17
naptRFPublicGateway
IP Address of RF Public Interface Gateway. The variable is available only when NAPT is enabled.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.2.1.18
naptEnable
To enable or disable NAPT. For multipoint only. 1=Enable NAPT, 0=Disable NAPT.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.19
powerUpMode
SM Power Up Mode With No 802.3 Link. 0 - Power up in Operational mode. 1 - Power up in Aim mode.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.2
arpCacheTimeout
ARP cache time out in unit of minutes. For multipoint only. Range from 1-30.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.20
tcpGarbageCollectTmout
Units of minutes for TCP garbage collection. For multipoint only. Range 4-1440.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.21
udpGarbageCollectTmout
Units of minutes for UDP garbage collection. For multipoint only. Range 1-1440.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.22
dhcpClientEnable obsolete
To enable or disable DHCP client. For multipoint SM's with NAPT enabled.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.23
dhcpServerEnable
To enable or disable DHCP server. For multipoint SM's with NAPT enabled.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.24
dhcpServerLeaseTime
Units of days for DHCP server lease time. For multipoint SM's with NAPT enabled. Range from 1-30.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.25
dhcpIPStart
The last byte will be set for the starting IP that our DHCP server gives away. The first 3 bytes of the starting IP are the same as those of NAPT private IP
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.2.1.26
dnsAutomatic
To have DHCP Server obtain DNS information automatically or manually.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.27
prefferedDNSIP
The preferred DNS IP when we are configured for static DNS (Not used when configured for automatic DNS).
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.2.1.28
alternateDNSIP
The alternate DNS IP when we are configured for static DNS (Not used when configured for automatic DNS).
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.2.1.29
lanIpSm
LAN IP.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.2.1.3
dmzIP
Only the last byte of DMZ Host IP will be set. The first 3 bytes of DMZ IP are the same as those of NAPT private IP.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.2.1.30
dmzEnable
To enable or disable DMZ host functionality.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.31
dhcpNumIPsToLease
Number of IP addresses that our DHCP server can give away.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.32
pppoeFilter obsolete
To set PPPoE packet filter when NAT is disabled. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.33
smbFilter obsolete
To set SMB packet filter when NAT is disabled. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.34
snmpFilter obsolete
To set SNMP packet filter when NAT is disabled. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.35
userP1Filter obsolete
To set user defined port 1 packet filter when NAT is disabled. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.36
userP2Filter obsolete
To set user defined port 2 packet filter when NAT is disabled. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.37
userP3Filter obsolete
To set user defined port 3 packet filter when NAT is disabled. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.38
allOtherIpFilter obsolete
To set all other IPv4 packet filter when NAT is disabled. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.39
lanMaskSm
LAN subnet mask.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.2.1.4
upLinkBCastFilter obsolete
This variable is currently obsolete.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.40
arpFilter obsolete
To set ARP packet filter when NAT is disabled. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.41
allOthersFilter obsolete
To set all other packet filter when NAT is disabled. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.42
userDefinedPort1 obsolete
An integer value of number one user defined port. Range:0-65535 Obsolete - Use corresponding OID in whipsBoxConfig MIB.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.43
port1TCPFilter obsolete
To set user defined port 1 TCP traffic filter. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.44
port1UDPFilter obsolete
To set user defined port 1 UDP traffic filter. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.45
port2TCPFilter obsolete
To set user defined port 2 TCP traffic filter. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.47
port2UDPFilter obsolete
To set user defined port 2 UDP traffic filter. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.48
userDefinedPort3 obsolete
An integer value of number three user defined port. Range:0-65535 Obsolete - Use corresponding OID in whipsBoxConfig MIB.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.49
defaultGwSm
Default gateway.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.2.1.5
port3TCPFilter obsolete
To set user defined port 3 TCP traffic filter. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.50
port3UDPFilter obsolete
To set user defined port 3 UDP traffic filter. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.51
bootpcFilter obsolete
To set bootp client sourced packets filter when NAT is disabled. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.52
bootpsFilter obsolete
To set bootp server sourced packets filter when NAT is disabled. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.53
ip4MultFilter obsolete
To set IPv4 MultiCast packets filter when NAT is disabled. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.54
ingressVID
Untagged ingress VID.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.55
lowPriorityUplinkCIR
Low priority uplink CIR.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.56
lowPriorityDownlinkCIR
Low priority downlink CIR.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.57
hiPriorityChannel
To enable or disable high priority channel.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.58
hiPriorityUplinkCIR
High priority uplink CIR.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.59
networkAccess
Network accessibility. Public or local IP. For multipoint only.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.6
hiPriorityDownlinkCIR
High priority downlink CIR.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.60
smRateAdapt obsolete
Rate adaptation parameter. 0: no rate adaptation. 1: 1x and 2x adaptation. 2: 1x,2x and 3x adaptation.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.61
upLnkDataRate
Sustained uplink bandwidth cap.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.62
upLnkLimit
Burst uplink bandwidth cap.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.63
dwnLnkDataRate
Sustained downlink bandwidth cap.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.64
dwnLnkLimit
Burst downlink bandwidth cap.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.65
dfsConfig obsolete
To configure proper regions for Dynamic Frequency Shifting. For 5.2/5.4/5.7 GHz radios.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.66
ethAccessFilterEnable obsolete
To enable or disable Ethernet Port access filtering to SM Management Functions. (0) - Ethernet access to SM Management allowed. (1) - Ethernet access to SM Management blocked.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.67
ipAccessFilterEnable
To enable or disable IP access filtering to Management functions. (0) - IP access will be allowed from all addresses. (1) - IP access will be controlled using allowedIPAccess1-3 e…
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.68
allowedIPAccess1
Allow access to SM Management from this IP. 0 is default setting to allow from all IPs.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.2.1.69
authKeySm
Authentication key. It should be equal or less than 32 characters long.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.1.7
allowedIPAccess2
Allow access to SM Management from this IP. 0 is default setting to allow from all IPs.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.2.1.70
allowedIPAccess3
Allow access to SM Management from this IP. 0 is default setting to allow from all IPs.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.2.1.71
rfDhcpState
To enable or disable RF Interface DHCP feature.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.72
bCastMIR
To enable and set Broadcast/ Multicast MIR feature. Use value of 0 to disable. Units are as per bCastMIRUnits variable. Set the units first and then set this value.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.73
bhsReReg obsolete
Allows BHS re-registration every 24 hours. Enable allows re-registration and Disable does not. 24 Hour Encryption Refresh.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.74
smLEDModeFlag
To set LED Panel Operation to Revised Mode(1) or to Legacy Mode(0)
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.75
ethAccessEnable
To enable or disable Ethernet Port access to SM Management Functions. (1) - Ethernet access to SM Management allowed. (0) - Ethernet access to SM Management blocked.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.76
pppoeEnable
Enable or disable PPPoE on the SM. NAT MUST be enabled prior and Translation Bridging MUST be DISABLED on the AP.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.77
pppoeAuthenticationType
Set the PPPoE Authentication Type to either None or CHAP/pap
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.78
pppoeAccessConcentrator
Set the PPPoE Access Concentrator Name. Less than or equal to 32 characters
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.1.79
enable8023link deprecated
To enable or disable 802.3 link. For SMs only. Deprecated: Use enable8023linkBox instead.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.8
pppoeServiceName
Set the PPPoE Service Name. Less than or equal to 32 characters
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.1.80
pppoeUserName
Set the PPPoE Username. Less than or equal to 32 characters
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.1.81
pppoePassword
Set the PPPoE Password. Less than or equal to 32 characters
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.1.82
pppoeTCPMSSClampEnable
Enable or disable TCP MSS Clamping. Enabling this will cause the SM to edit the TCP MSS in TCP SYN and SYN-ACK packets. This will allow for a workaround for MTU issues so that th…
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.83
pppoeMTUOverrideEnable
Enable the overriding of the PPP link's MTU. Normally, the PPP link will set the MTU to the MRU of the PPPoE Server, but this may be overridden. If the MRU of the PPPoE server i…
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.84
pppoeMTUOverrideValue
Enable the overriding of the PPP link's MTU. Normally, the PPP link will set the MTU to the MRU of the PPPoE Server, but this may be overridden. If the MRU of the PPPoE server i…
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.85
pppoeTimerType
Set the PPPoE Timer type. Can be a Keep Alive timer where the link will be checked periodically and automatically redialed if the link is down. Also could be an Idle Timeout whe…
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.86
pppoeTimeoutPeriod
The Timeout Period. The use of this depends on the Timer Type. If the Timer Type is KeepAlive, then the timeout period is in seconds. If the Timer Type is Idle Timeout, then th…
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.87
timedSpectrumAnalysisDuration deprecated
As of release 13.0.2 this value is depricated. Please use the OID in whispBoxConfig. Value in seconds for a timed spectrum analysis. Range is 10-1000 seconds.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.88
spectrumAnalysisOnBoot
To enable or disable Spectrum Analysis on boot up for one scan through the band. (0) - Disabled (1) - Enabled
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.89
authKeyOption
This option is for SMs only. Backhaul timing slave always uses the set key. 0 - Use default key. 1 - Use set key.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.9
spectrumAnalysisAction deprecated
As of release 13.0.2, this OID has been deprecated. Please use the OID in whispBoxConfig. Start or stop timed or continuous Spectrum Analysis and also give status. (0) - Stop Spec…
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.90
pppoeConnectOD
Force a manual PPPoE connection attempt.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.91
pppoeDisconnectOD
Force a manual PPPoE disconnection.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.92
smAntennaType obsolete
Deprecated. See whispBoxStatus.antType for antenna type information.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.93
natConnectionType
To configure the SM NAT connection type. Options are Static IP, DHCP, or PPPoE.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.94
wanPingReplyEnable
Allow Ping replies from SM WAN interface. Applies to both NAT and PPPoE WAN interfaces.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.95
packetFilterDirection obsolete
To packet filter direction when NAT is disabled. Upstream is default. Obsolete - Use corresponding OID in whipsBoxConfig MIB.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.96
colorCode2 deprecated
Second Color code. The variable is deprecated. See additionalColorCode in whispSmConfig.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.97
colorCodepriority2 deprecated
Priority setting for the second color code. The variable is deprecated. See additionalColorCodePriority in whispSmConfig.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.1.98
colorCode3 deprecated
Third Color code. The variable is deprecated. See additionalColorCode in whispSmConfig.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.1.99