mimoQpskBerDisplay

WHISP-SM-MIB · .1.3.6.1.4.1.161.19.3.2.2.101
MIB view Table view

Object

scalar SNMPv2-TCDisplayString 
QPSK BER statistics.
MIMO platforms only.

Context

MIB
WHISP-SM-MIB
OID
.1.3.6.1.4.1.161.19.3.2.2.101
Type
scalar
Access
readonly
Status
current
Parent
whispSmStatus
Siblings
133

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString

Values & Constraints

Type Constraints
range: 0..255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
sessionStatus
SM registered or not.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.2.1
dhcpCip
Assigned IP address to DHCP client.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.2.2.10
bridgecbDownlinkCreditLimit
Uplink Burst Allocation.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.161.19.3.2.2.100
mimo16QamBerDisplay
16-QAM BER statistics MIMO platforms only. Engineering use only.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.2.102
mimo64QamBerDisplay
64-QAM BER statistics MIMO platforms only. Engineering use only.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.2.103
mimo256QamBerDisplay
256-QAM BER statistics MIMO platforms only. Engineering use only.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.2.104
mimoBerRcvModulationType
Receive modulation type. MIMO platforms only.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.2.105
signalToNoiseRatioSMHorizontal
An estimated signal to noise ratio based on the last received data for horizontal antenna. MIMO radios only. Will return zero if Signal to Noise Ratio Calculation is disabled. Whe…
scalarInteger32.1.3.6.1.4.1.161.19.3.2.2.106
maxRadioDbmDeprecated deprecated
This OID was inadvertently moved in 12.0.2. Please use maxRadioDbm. This OID is deprecated and kept for backwards compatibility.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.2.107
signalStrengthRatio
Signal Strength Ratio in dB is the power received by the vertical antenna input (dB) - power received by the horizontal antenna input (dB). MIMO radios only.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.2.108
fragmentsReceived1XHorizontal
Engineering use only. Number of fragments received in 1x modulation. For MIMO radios only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted …
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.2.2.109
dhcpSip
Public DHCP server IP.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.2.2.11
fragmentsReceived2XHorizontal
Engineering use only. Number of fragments received in 2x modulation. For MIMO radios only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted …
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.2.2.110
fragmentsReceived3XHorizontal
Engineering use only. Number of fragments received in 3x modulation. For MIMO radios only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted …
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.2.2.111
fragmentsReceived4XHorizontal
Engineering use only. Number of fragments received in 4x modulation. For MIMO radios only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted …
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.2.2.112
linkQualityData1XHorizontal
Engineering use only. Link Quality for the data VC for QPSK modulation (1X). For MIMO radios only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be …
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.2.113
linkQualityData2XHorizontal
Engineering use only. Link Quality for the data VC for 16-QAM modulation (2X). For MIMO radios only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only b…
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.2.114
linkQualityData3XHorizontal
Engineering use only. Link Quality for the data VC for 64-QAM modulation (3X). For MIMO radios only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only b…
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.2.115
linkQualityData4XHorizontal
Engineering use only. Link Quality for the data VC for 256-QAM modulation (4X). For MIMO radios only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only …
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.2.116
radioDbmHorizontal
Receive power level of the horizontal antenna in dBm. MIMO radios only.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.2.117
radioDbmVertical
Receive power level of the vertical antenna in dBm. MIMO radios only.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.2.118
bridgecbDownlinkMaxBurstBitRate
Maximum burst downlink rate.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.161.19.3.2.2.119
dhcpClientLease
DHCP client lease time.
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.161.19.3.2.2.12
bridgecbUplinkMaxBurstBitRate
Maximum burst uplink Rate.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.161.19.3.2.2.120
currentCyclicPrefix
The Current Cyclic Prefix of the AP/BHM when in session.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.2.121
currentBandwidth
The Current Bandwidth of the AP/BHM when in session.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.2.122
berPwrRxFPGAPathA
BER power level on FPGA Rx Path A of SM. Engineering Use Only.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.2.123
berPwrRxFPGAPathB
BER power level on FPGA Rx Path B of SM. Engineering Use Only.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.2.124
rawBERPwrRxPathA
Raw unadjusted BER power level on FPGA Rx Path A of SM. Engineering Use Only.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.2.125
rawBERPwrRxPathB
Raw unadjusted BER power level on FPGA Rx Path B of SM. Engineering Use Only.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.2.126
radioModeStatus deprecated
The current radio mode that SM is operating in. PMP 430 SMs only. As of 14.2, the 430 SM only supports PMP 450 interoperability mode, so this will only return pmp450Interoperabili…
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.2.127
adaptRateLowPri
The current transmitting rate of the low priority VC. 0 : SM is not in session 1 : 1X QPSK SISO 2 : 2X 16-QAM SISO or QPSK MIMO 3 : 3X 64-QAM SISO 4 : 4X 256-QAM SISO or 16-QAM MI…
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.2.128
adaptRateHighPri
The current transmitting rate of the high priority VC. -1 : High Priority Channel not configured 0 : SM is not in session 1 : 1X QPSK SISO 2 : 2X 16-QAM SISO or QPSK MIMO 3 : 3X 6…
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.2.129
dhcpCSMask
Public DHCP server subnet mask.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.2.2.13
bitErrorsQSPKpathA
Number of bit errors received from BER packet at QPSK path A. Valid MIMO platforms only.
scalarSNMPv2-SMICounter64.1.3.6.1.4.1.161.19.3.2.2.130
bitErrorsQSPKpathB
Number of bit errors received from BER packet at QPSK path B. Valid MIMO platforms only.
scalarSNMPv2-SMICounter64.1.3.6.1.4.1.161.19.3.2.2.131
bitErrors16QAMpathA
Number of bit errors received from BER packet at 16-QAM path A. Valid MIMO platforms only. Engineering use only.
scalarSNMPv2-SMICounter64.1.3.6.1.4.1.161.19.3.2.2.132
bitErrors16QAMpathB
Number of bit errors received from BER packet at 16-QAM path B. Valid MIMO platforms only. Engineering use only.
scalarSNMPv2-SMICounter64.1.3.6.1.4.1.161.19.3.2.2.133
bitErrors64QAMpathA
Number of bit errors received from BER packet at 64-QAM path A. Valid MIMO platforms only. Engineering use only.
scalarSNMPv2-SMICounter64.1.3.6.1.4.1.161.19.3.2.2.134
bitErrors64QAMpathB
Number of bit errors received from BER packet at 64-QAM path B. Valid MIMO platforms only. Engineering use only.
scalarSNMPv2-SMICounter64.1.3.6.1.4.1.161.19.3.2.2.135
bitErrors256QAMpathA
Number of bit errors received from BER packet at 256-QAM path A. Valid MIMO platforms only. Engineering use only.
scalarSNMPv2-SMICounter64.1.3.6.1.4.1.161.19.3.2.2.136
bitErrors256QAMpathB
Number of bit errors received from BER packet at 256-QAM path B. Valid MIMO platforms only. Engineering use only.
scalarSNMPv2-SMICounter64.1.3.6.1.4.1.161.19.3.2.2.137
bitsReceivedPerPathModulation
Number of bit received from BER. To calculate Bit Error Rate, take bit errors at a modulation and path and divide by this OID. To get combined BER add errors and divide by this mu…
scalarSNMPv2-SMICounter64.1.3.6.1.4.1.161.19.3.2.2.138
beaconsPercentReceived
The current percentage of beacons that the SM/BHS successfully receiving.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.2.139
dhcpDfltRterIP
Public default router IP address.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.2.2.14
mapsPercentReceived
PMP 450 only. The current percentage of scheduling maps that the SM/BHS successfully receiving.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.2.140
natTslTableEntries
Number of Entries in NAT Translation Table.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.2.141
maxReceivePower
Maximum receive power level for this session. MIMO radios only.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.2.142
beaconsPercentMinReceived
The percentage of the least number of beacons that the SM/BHS successfully received in a 16 second window for the last 15 minutes. This will be updated only once in 15 minutes.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.2.143
beaconsPercentMaxReceived
The percentage of the maximum number of beacons that the SM/BHS successfully received in a 16 second window for the last 15 minutes. This will be updated only once in 15 minutes.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.2.144
beaconsPercentReceivedSnapshot
The percentage of beacons that the SM/BHS successfully received for the last 15 minutes. This will be updated only once in 15 minutes.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.2.145
smSectorID
The current Sector ID of the Registered AP/BHM. A value of -1 is return when the device is not registered or AP/BHM does not support Sector ID.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.2.146
scanCycleCount
The number of scan cycles. This increments after the SM completes scanning every configured frequency and channel bandwidth.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.2.2.147
bridgeCbErrStatBridgeDropCount
Packet drop count for hosts with MAC address not in bridge table
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.2.2.148
dhcpcdns1
Primary public domain name server.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.2.2.15
dhcpcdns2
Secondary public domain name server.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.2.2.16
dhcpcdns3
Third public domain name server.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.2.2.17
dhcpDomName
Public domain name server.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.2.18
dhcpServerTable
The table of DHCP server hosts.
table-.1.3.6.1.4.1.161.19.3.2.2.19
rssi
Radio signal strength index. FSK only.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.2.2
adaptRate
VC adapt rate.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.2.20
radioDbmInt
Radio power level(integer). For MIMO radios this is the combined power of the horiztontal and vertical paths.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.2.21
dfsStatus
Dynamic frequency shifting status. For DFS Radio only.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.2.22
radioTxPwr
Tx Power level. Valid for FSK and OFDM SMs.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.2.23
activeRegion
The active region of the radio.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.2.24
snmpBerLevel
BER level. For PMP 450 systems: 2=MIMO QPSK, 4=MIMO 16-QAM, 6=MIMO64-QAM, 8=256-QAM For non PMP 450: 2=2 level BER, 4=4 level BER.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.2.25
nbBitsRcvd
Number of BER bits received (non MIMO platforms only).
scalarSNMPv2-SMICounter64.1.3.6.1.4.1.161.19.3.2.2.26
nbPriBitsErr
Number of Primary bit errors (non MIMO platforms only).
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.2.2.27
nbSndBitsErr
Number of secondary bit errors (non MIMO platforms only).
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.2.2.28
primaryBER obsolete
Obsoleted, invalid type to represent this data. Measured Primary Bit Error Rate.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.2.29
jitter
A measure of multipath interference. Applicable to FSK radios only.
scalarUnsigned32.1.3.6.1.4.1.161.19.3.2.2.3
secondaryBER obsolete
Obsoleted, invalid type to represent this data. Measured Secondary Bit Error Rate.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.2.30
totalBER obsolete
Obsoleted, invalid type to represent this data. Measured Total Bit Error Rate.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.2.31
minRSSI
Measured Min. RSSI. Applicable to FSK radios only.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.2.32
maxRSSI
Measured Max. RSSI. Applicable to FSK radios only.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.2.33
minJitter
Measured Min. Jitter. Applicable to FSK radios only.
scalarUnsigned32.1.3.6.1.4.1.161.19.3.2.2.34
maxJitter
Measured Max. Jitter. Applicable to FSK radios only.
scalarUnsigned32.1.3.6.1.4.1.161.19.3.2.2.35
smSessionTimer
SM current session timer.
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.161.19.3.2.2.36
pppoeSessionStatus
Current PPPoE Session Status
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.2.37
pppoeSessionID
Current PPPoE Session ID
scalarInteger32.1.3.6.1.4.1.161.19.3.2.2.38
pppoeIPCPAddress
Current PPPoE IPCP IP Address
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.2.2.39
airDelay
Round trip delay in bits.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.161.19.3.2.2.4
pppoeMTUOverrideEn
Current PPPoE MTU Override Setting
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.2.40
pppoeMTUValue
Current PPPoE MTU Value
scalarInteger32.1.3.6.1.4.1.161.19.3.2.2.41
pppoeTimerTypeValue
Current PPPoE Timer Type. 0 is disabled, 1 is Keep Alive timer, and 2 is Idle Timeout timer.
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.2.42
pppoeTimeoutValue
Current PPPoE Timeout Period. The use of this depends on the Timer Type. If the Timer Type is KeepAlive, then the timeout period is in seconds. If the Timer Type is Idle Timeou…
scalarInteger32.1.3.6.1.4.1.161.19.3.2.2.43
pppoeDNSServer1
PPPoE DNS Server 1
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.2.2.44
pppoeDNSServer2
PPPoE DNS Server 2
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.2.2.45
pppoeControlBytesSent
PPPoE Control Bytes Sent
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.2.2.46
pppoeControlBytesReceived
PPPoE Control Bytes Received
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.2.2.47
pppoeDataBytesSent
PPPoE Data Bytes Sent
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.2.2.48
pppoeDataBytesReceived
PPPoE Data Bytes Received
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.2.2.49
radioSlicingSm obsolete
This variable is deprecated.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.2.5
pppoeEnabledStatus
PPPoE Enabled
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.2.50
pppoeTCPMSSClampEnableStatus
PPPoE TCP MSS Clamping Enable
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.2.51
pppoeACNameStatus
Current PPPoE Access Concentrator In Use
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.2.52
pppoeSvcNameStatus
Current PPPoE Service Name In Use
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.2.53
pppoeSessUptime
Uptime of current PPPoE Session in ticks
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.161.19.3.2.2.54
primaryBERDisplay
Measured Primary Bit Error Rate. Non MIMO platforms only.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.2.55
secondaryBERDisplay
Measured Secondary Bit Error Rate. FSK platforms only.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.2.56
totalBERDisplay
Measured Total Bit Error Rate. For MIMO this is combined both paths.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.2.57
minRadioDbm
Maximum receive power of beacon in dBm. For MIMO radios, this is only available in the vertical path.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.2.58
maxRadioDbm
Maximum receive power in dBm (rounded to nearest integer).
scalarInteger32.1.3.6.1.4.1.161.19.3.2.2.59
radioTxGainSm
Radio transmission gain setting. Applicable to FSK radios only.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.2.6
pppoeSessIdleTime
Idle Time of current PPPoE Session in ticks
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.161.19.3.2.2.60
radioDbmAvg
Average Receive Power of the AP's beacon in dBm. OFDM Radios only. For MIMO this is only the verical path, as the beacon is not transmitted on horizontal.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.2.61
zoltarFPGAFreqOffset
FPGA peek of 70001088
scalarInteger32.1.3.6.1.4.1.161.19.3.2.2.62
zoltarSWFreqOffset
FPGA peek of 7000108C
scalarInteger32.1.3.6.1.4.1.161.19.3.2.2.63
airDelayns
Round trip delay in nanoseconds.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.161.19.3.2.2.64
currentColorCode
The current Color Code of the Registered AP/BHM. A value of -1 is return when the device is not registered.
scalarInteger32.1.3.6.1.4.1.161.19.3.2.2.65
currentColorCodePri
The current priority of the Registered color code
scalarEnumeration.1.3.6.1.4.1.161.19.3.2.2.66
currentChanFreq
The Current Channel Frequency of the AP/BHM when in session.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.161.19.3.2.2.67
linkQualityBeacon
Engineering only. Link Quality for incoming beacons. For Gen II OFDM radios and forward. For PMP 450 and forward this is vertical path.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.2.68
calibrationStatus deprecated
Varible deprecated. Please use calibrationStatusBox.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.2.7
dhcpServerPktXmt
Number of packets transmitted by SM DHCP Server
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.2.2.72
dhcpServerPktRcv
Number of packets received by SM DHCP Server
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.2.2.73
dhcpServerPktToss
Number of packets tossed by SM DHCP Server
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.2.2.74
radioDbm
Rx Power level. For MIMO this is the combined power of the horizontal and vertical paths.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.2.8
receiveFragmentsModulationPercentage
Engineering use only. The percentage of recent fragments received at which modulation. For Gen II OFDM only and forward.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.2.86
fragmentsReceived1XVertical
Engineering use only. Number of fragments received in 1x modulation. For GenII OFDM only and forward. For MIMO this is the vertical path.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.2.2.87
fragmentsReceived2XVertical
Engineering use only. Number of fragments received in 2x modulation. For GenII OFDM only and forward. For MIMO this is the vertical path.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.2.2.88
fragmentsReceived3XVertical
Engineering use only. Number of fragments received in 3x modulation. For GenII OFDM only and forward. For MIMO this is the vertical path.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.2.2.89
registeredToAp
AP MAC address that the SM registered to.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.2.9
fragmentsReceived4XVertical
Engineering use only. Number of fragments received in 4x modulation. For GenII OFDM only and forward. For MIMO this is the vertical path.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.2.2.90
linkQualityData1XVertical
Engineering use only. Link Quality for the data VC for QPSK modulation (1X). For Gen II OFDM radios and forward only. For MIMO this is the vertical path.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.2.91
linkQualityData2XVertical
Engineering use only. Link Quality for the data VC for 16-QAM modulation (2X). For Gen II OFDM radios and forward only. For MIMO this is the vertical path.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.2.92
linkQualityData3XVertical
Engineering use only. Link Quality for the data VC for 64-QAM modulation (3X). For Gen II OFDM radios and forward only. For MIMO this is the vertical path.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.2.93
linkQualityData4XVertical
Engineering use only. Link Quality for the data VC for 256-QAM modulation (4X). For Gen II OFDM radios and forward only. For MIMO this is the vertical path.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.2.2.94
signalToNoiseRatioSMVertical
An estimated signal to noise ratio based on the last received data. For GenII OFDM only and forward. For MIMO this is the vertical antenna. Will return zero if Signal to Noise Rat…
scalarInteger32.1.3.6.1.4.1.161.19.3.2.2.95
rfStatTxSuppressionCount
RF Scheduler Stats DFS TX Suppression Count
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.2.2.96
bridgecbUplinkCreditRate
Sustained uplink data rate.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.161.19.3.2.2.97
bridgecbUplinkCreditLimit
Uplink Burst Allocation.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.161.19.3.2.2.98
bridgecbDownlinkCreditRate
Sustained uplink data rate.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.161.19.3.2.2.99