ingressVIDPriority
WHISP-SM-MIB ·
.1.3.6.1.4.1.161.19.3.2.1.148
Object
scalar
r/w
Integer32
ingress VID VLAN Priority.
Context
- MIB
- WHISP-SM-MIB
- OID
.1.3.6.1.4.1.161.19.3.2.1.148- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- whispSmConfig
- Siblings
- 156
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-7
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rfScanList RF scan list string.
The frequencies vary by product and region.
If the frequency list is too long an SNMP error will be returned. If this occurs please refer to
OID rfScanListTa… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.1.1 |
| timingPulseGated 0 - Disable (Always propagate the frame timing pulse).
1 - Enable (If SM out of sync then dont propagate the frame timing pulse). | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.10 |
| colorCodepriority3 deprecated Priority setting for the third color code. The variable is deprecated.
See additionalColorCodePriority in whispSmConfig. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.100 |
| colorCode4 deprecated Fourth Color code. The variable is deprecated. See additionalColorCode in whispSmConfig. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.101 |
| colorCodepriority4 deprecated Priority setting for the fourth color code. The variable is deprecated.
See additionalColorCodePriority in whispSmConfig. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.102 |
| colorCode5 deprecated Fifth Color code. The variable is deprecated. See additionalColorCode in whispSmConfig. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.103 |
| colorCodepriority5 deprecated Priority setting for the fifth color code. The variable is deprecated.
See additionalColorCodePriority in whispSmConfig. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.104 |
| colorCode6 deprecated Sixth Color code. The variable is deprecated. See additionalColorCode in whispSmConfig. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.105 |
| colorCodepriority6 deprecated Priority setting for the sixth color code. The variable is deprecated.
See additionalColorCodePriority in whispSmConfig. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.106 |
| colorCode7 deprecated Seventh Color code. The variable is deprecated. See additionalColorCode in whispSmConfig. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.107 |
| colorCodepriority7 deprecated Priority setting for the seventh color code. The variable is deprecated.
See additionalColorCodePriority in whispSmConfig. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.108 |
| colorCode8 deprecated Eighth Color code. The variable is deprecated. See additionalColorCode in whispSmConfig. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.109 |
| naptPrivateIP NAPT private IP address. Only the first three bytes can be
changed when NAPT is enabled. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.2.1.11 |
| colorCodepriority8 deprecated Priority setting for the eighth color code. The variable is deprecated.
See additionalColorCodePriority in whispSmConfig. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.110 |
| colorCode9 deprecated Ninth Color code. The variable is deprecated. See additionalColorCode in whispSmConfig. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.111 |
| colorCodepriority9 deprecated Priority setting for the ninth color code. The variable is deprecated.
See additionalColorCodePriority in whispSmConfig. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.112 |
| colorCode10 deprecated Tenth Color code. The variable is deprecated. See additionalColorCode in whispSmConfig. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.113 |
| colorCodepriority10 deprecated Priority setting for the tenth color code. The variable is deprecated.
See additionalColorCodePriority in whispSmConfig. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.114 |
| natDNSProxyEnable If enabled, the SM will advertise itself as the DNS server when it sends out DHCP client leases and forward DNS queries automatically.
If disabled, the SM will forward on upstream… | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.115 |
| allIpv4Filter obsolete To set all IPv4 packet filter when NAT
is disabled. Enabling this will automatically enable all of the known IP filters (SMB, SNMP, Bootp,
IPv4 Mcast, User Defined Ports, and All… | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.116 |
| spectrumAnalysisDisplay The display for Spectrum Analyzer:
(0) - Averaging over entire period
(1) - Instantaneous showing the last reading | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.117 |
| syslogSMXmitSetting deprecated Obtains Syslog transmit configuration from AP/BHM if set to 0, overrides if 1 or 2. Transmits syslog data to Syslog server if enabled(1), stops if disabled (2). | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.118 |
| syslogServerApPreferred Uses Syslog server configuration from AP/BHM if enabled and available,
otherwise uses local configuration. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.119 |
| naptPrivateSubnetMask NAPT private subnet mask. Only the last byte can be
changed when NAPT is enabled. The address will always be:
255.255.255.x. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.2.1.12 |
| syslogMinLevelApPreferred Uses Syslog minimum transmit level configuration from AP/BHM if available,
otherwise uses local configuration. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.120 |
| syslogSMXmitControl Obtains Syslog transmit configuration from AP/BHM if available, or specifies the local transmit state. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.121 |
| eapPeerAAAServerCommonName THIS OID IS CURRENTLY UNUSED: EAP Peer Server Common Name | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.1.126 |
| rfScanListBandFilter obsolete This element is obsolete. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.127 |
| upLnkMaxBurstDataRate Maximum burst uplink rate. | scalar | Kilobits/sec Integer32 | .1.3.6.1.4.1.161.19.3.2.1.128 |
| dwnLnkMaxBurstDataRate Maximum burst downlink rate. | scalar | Kilobits/sec Integer32 | .1.3.6.1.4.1.161.19.3.2.1.129 |
| naptPublicIP IP Address of NAPT Public Interface. The variable is available
only when NAPT is enabled. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.2.1.13 |
| cyclicPrefixScan Cyclic Prefix value for frequency scanning used by MIMO SMs only.
When setting use a comma delimited list of cyclic prefixes with no spaces. For example: 1/8,1/16 | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.1.130 |
| bandwidthScan Bandwidth values for frequency scanning used by MIMO SMs only.
When setting use a comma delimited list of bandwidths.
For example: 10, 20 | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.1.131 |
| apSelection This OID affects what AP to attempt to register to when Canopy SMs scan see more than one AP that are valid in it's configuration.
(0) - Default, Canopy radios after scanning sele… | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.132 |
| radioBandscanConfig Used to determine when frequency, cyclic prefix and bandwidth settings take effect for
band scanning MIMO SMs.
0 - Instant
1 - Delayed
2 - Apply changes | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.133 |
| forcepoweradjust This will force a multipoint SM to initiate an asynchronous power adjust sequence.
This is done automatically every 2 minutes. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.134 |
| clearBerrResults This will clear the BER results. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.135 |
| berrautoupdateflag This indicates if the once a second BERR updating of counters is enabled. 1 = enabled 0 = disabled | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.136 |
| testSMBER 0 - Disable (Return the SM to a normal operation state).
1 - Enable (Set SM into a BER test state). | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.137 |
| allowedIPAccessNMLength1 Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.138 |
| allowedIPAccessNMLength2 Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.139 |
| naptPublicSubnetMask Subnet mask for NAPT Public Interface. The variable is available
only when NAPT is enabled. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.2.1.14 |
| allowedIPAccessNMLength3 Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.140 |
| naptRemoteManage To enable or disable Remote Management. For multipoint only.
0=Disable Remote Management,
1=Enable - Standalone Config,
2=Enable - Use WAN Interface. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.141 |
| spectrumAnalysisScanBandwidth Scanning Bandwidth used for the Spectrum Analyzer. Only available on PMP 450. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.142 |
| berDeModSelect The BER demodulation level the SM is set. 0 for QPSK, 1 for 16-QAM, 2 for 64-QAM, and 3 for 256-QAM. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.143 |
| multicastVCRcvRate Multicast VC Receive Rate | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.1.144 |
| pmp430ApRegistrationOptions deprecated Deprecated. The 430 SM only supports PMP 450
interoperability mode. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.145 |
| switchRadioModeAndReboot obsolete As of 14.2, the 430 SM no longer supports multiple
radio modes. It only support 450 interoperability
mode. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.146 |
| natTslTableSize NAT Translation Table Size.
Range 1024-8192. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.147 |
| ingressVIDPriorityMode ingress VID VLAN Priority Mode. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.149 |
| naptPublicGatewayIP IP Address of NAPT Public Interface Gateway. The variable is available
only when NAPT is enabled. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.2.1.15 |
| providerVIDPriority Provider VID VLAN Priority. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.150 |
| providerVIDPriorityMode Provider VID VLAN Priority Mode. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.151 |
| additionalColorCode Add an additional color code. Setting additionalColorCode and
additionalColorCodePriority adds an entry. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.152 |
| additionalColorCodePriority Add an additional color code priority. Setting additionalColorCode and
additionalColorCodePriority adds an entry. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.153 |
| deleteAdditionalColorCode Delete an additional color code. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.154 |
| bCastMIRUnits Units of Broadcast/ Multicast MIR value. Set units first and then bCastMIR | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.155 |
| rfScanListTable The list of configured scanning frequencies on the SM or BHS. | table | - | .1.3.6.1.4.1.161.19.3.2.1.156 |
| txPowerControl Enable/Disable Automatic control of SM TX power.
Engineering use only. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.157 |
| bridgeTableSize Bridge Table Size : 4 -- 4096. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.158 |
| bridgeTableRestrict Restrict forwarding packets from hosts for which MAC address is not in the bridge table. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.159 |
| naptRFPublicIP IP Address of RF Public Interface. The variable is available
only when NAPT is enabled. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.2.1.16 |
| maxTxPowerEnable Enable Max Tx Power configuration.
This is used with OID maxTxPower to set the max transmit power.
This might be required in certain regions and frequency bands.
See User Guide fo… | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.160 |
| maxTxPower This OID is controled by OID maxTxPowerEnable.
This might be required in certain regions and frequency bands.
See user guide for more information.
Setting this will not allow a ra… | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.161 |
| naptRFPublicSubnetMask Subnet mask of RF Public Interface. The variable is available
only when NAPT is enabled. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.2.1.17 |
| naptRFPublicGateway IP Address of RF Public Interface Gateway. The variable is
available only when NAPT is enabled. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.2.1.18 |
| naptEnable To enable or disable NAPT. For multipoint only.
1=Enable NAPT, 0=Disable NAPT. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.19 |
| powerUpMode SM Power Up Mode With No 802.3 Link.
0 - Power up in Operational mode.
1 - Power up in Aim mode. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.2 |
| arpCacheTimeout ARP cache time out in unit of minutes. For multipoint only.
Range from 1-30. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.20 |
| tcpGarbageCollectTmout Units of minutes for TCP garbage collection. For multipoint only.
Range 4-1440. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.21 |
| udpGarbageCollectTmout Units of minutes for UDP garbage collection. For multipoint only.
Range 1-1440. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.22 |
| dhcpClientEnable obsolete To enable or disable DHCP client. For multipoint SM's
with NAPT enabled. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.23 |
| dhcpServerEnable To enable or disable DHCP server. For multipoint SM's
with NAPT enabled. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.24 |
| dhcpServerLeaseTime Units of days for DHCP server lease time. For multipoint
SM's with NAPT enabled. Range from 1-30. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.25 |
| dhcpIPStart The last byte will be set for the starting IP that
our DHCP server gives away. The first 3 bytes of the
starting IP are the same as those of NAPT private IP | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.2.1.26 |
| dnsAutomatic To have DHCP Server obtain DNS information automatically or manually. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.27 |
| prefferedDNSIP The preferred DNS IP when we are configured for static DNS
(Not used when configured for automatic DNS). | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.2.1.28 |
| alternateDNSIP The alternate DNS IP when we are configured for static DNS
(Not used when configured for automatic DNS). | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.2.1.29 |
| lanIpSm LAN IP. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.2.1.3 |
| dmzIP Only the last byte of DMZ Host IP will be set.
The first 3 bytes of DMZ IP are the same as those of
NAPT private IP. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.2.1.30 |
| dmzEnable To enable or disable DMZ host functionality. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.31 |
| dhcpNumIPsToLease Number of IP addresses that our DHCP server can give away. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.32 |
| pppoeFilter obsolete To set PPPoE packet filter when NAT is disabled.
Obsolete - Use corresponding OID in whipsBoxConfig MIB. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.33 |
| smbFilter obsolete To set SMB packet filter when NAT is disabled.
Obsolete - Use corresponding OID in whipsBoxConfig MIB. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.34 |
| snmpFilter obsolete To set SNMP packet filter when NAT is disabled.
Obsolete - Use corresponding OID in whipsBoxConfig MIB. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.35 |
| userP1Filter obsolete To set user defined port 1 packet filter when
NAT is disabled.
Obsolete - Use corresponding OID in whipsBoxConfig MIB. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.36 |
| userP2Filter obsolete To set user defined port 2 packet filter when
NAT is disabled.
Obsolete - Use corresponding OID in whipsBoxConfig MIB. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.37 |
| userP3Filter obsolete To set user defined port 3 packet filter when
NAT is disabled.
Obsolete - Use corresponding OID in whipsBoxConfig MIB. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.38 |
| allOtherIpFilter obsolete To set all other IPv4 packet filter when NAT
is disabled.
Obsolete - Use corresponding OID in whipsBoxConfig MIB. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.39 |
| lanMaskSm LAN subnet mask. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.2.1.4 |
| upLinkBCastFilter obsolete This variable is currently obsolete. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.40 |
| arpFilter obsolete To set ARP packet filter when NAT is disabled.
Obsolete - Use corresponding OID in whipsBoxConfig MIB. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.41 |
| allOthersFilter obsolete To set all other packet filter when NAT is disabled.
Obsolete - Use corresponding OID in whipsBoxConfig MIB. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.42 |
| userDefinedPort1 obsolete An integer value of number one user defined port. Range:0-65535
Obsolete - Use corresponding OID in whipsBoxConfig MIB. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.43 |
| port1TCPFilter obsolete To set user defined port 1 TCP traffic filter.
Obsolete - Use corresponding OID in whipsBoxConfig MIB. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.44 |
| port1UDPFilter obsolete To set user defined port 1 UDP traffic filter.
Obsolete - Use corresponding OID in whipsBoxConfig MIB. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.45 |
| userDefinedPort2 obsolete An integer value of number two user defined port. Range:0-65535
Obsolete - Use corresponding OID in whipsBoxConfig MIB. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.46 |
| port2TCPFilter obsolete To set user defined port 2 TCP traffic filter.
Obsolete - Use corresponding OID in whipsBoxConfig MIB. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.47 |
| port2UDPFilter obsolete To set user defined port 2 UDP traffic filter.
Obsolete - Use corresponding OID in whipsBoxConfig MIB. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.48 |
| userDefinedPort3 obsolete An integer value of number three user defined port. Range:0-65535
Obsolete - Use corresponding OID in whipsBoxConfig MIB. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.49 |
| defaultGwSm Default gateway. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.2.1.5 |
| port3TCPFilter obsolete To set user defined port 3 TCP traffic filter.
Obsolete - Use corresponding OID in whipsBoxConfig MIB. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.50 |
| port3UDPFilter obsolete To set user defined port 3 UDP traffic filter.
Obsolete - Use corresponding OID in whipsBoxConfig MIB. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.51 |
| bootpcFilter obsolete To set bootp client sourced packets filter when
NAT is disabled.
Obsolete - Use corresponding OID in whipsBoxConfig MIB. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.52 |
| bootpsFilter obsolete To set bootp server sourced packets filter when
NAT is disabled.
Obsolete - Use corresponding OID in whipsBoxConfig MIB. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.53 |
| ip4MultFilter obsolete To set IPv4 MultiCast packets filter when
NAT is disabled.
Obsolete - Use corresponding OID in whipsBoxConfig MIB. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.54 |
| ingressVID Untagged ingress VID. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.55 |
| lowPriorityUplinkCIR Low priority uplink CIR. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.56 |
| lowPriorityDownlinkCIR Low priority downlink CIR. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.57 |
| hiPriorityChannel To enable or disable high priority channel. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.58 |
| hiPriorityUplinkCIR High priority uplink CIR. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.59 |
| networkAccess Network accessibility. Public or local IP.
For multipoint only. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.6 |
| hiPriorityDownlinkCIR High priority downlink CIR. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.60 |
| smRateAdapt obsolete Rate adaptation parameter. 0: no rate adaptation. 1: 1x and 2x adaptation. 2: 1x,2x and 3x adaptation. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.61 |
| upLnkDataRate Sustained uplink bandwidth cap. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.62 |
| upLnkLimit Burst uplink bandwidth cap. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.63 |
| dwnLnkDataRate Sustained downlink bandwidth cap. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.64 |
| dwnLnkLimit Burst downlink bandwidth cap. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.65 |
| dfsConfig obsolete To configure proper regions for Dynamic Frequency Shifting. For 5.2/5.4/5.7 GHz radios. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.66 |
| ethAccessFilterEnable obsolete To enable or disable Ethernet Port access filtering to SM Management Functions.
(0) - Ethernet access to SM Management allowed.
(1) - Ethernet access to SM Management blocked. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.67 |
| ipAccessFilterEnable To enable or disable IP access filtering to Management functions.
(0) - IP access will be allowed from all addresses.
(1) - IP access will be controlled using allowedIPAccess1-3 e… | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.68 |
| allowedIPAccess1 Allow access to SM Management from this IP.
0 is default setting to allow from all IPs. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.2.1.69 |
| authKeySm Authentication key. It should be equal or less than 32
characters long. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.1.7 |
| allowedIPAccess2 Allow access to SM Management from this IP.
0 is default setting to allow from all IPs. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.2.1.70 |
| allowedIPAccess3 Allow access to SM Management from this IP.
0 is default setting to allow from all IPs. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.2.1.71 |
| rfDhcpState To enable or disable RF Interface DHCP feature. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.72 |
| bCastMIR To enable and set Broadcast/ Multicast MIR feature. Use value of 0 to disable.
Units are as per bCastMIRUnits variable. Set the units first and then set this value. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.73 |
| bhsReReg obsolete Allows BHS re-registration every 24 hours. Enable allows re-registration and Disable does not. 24 Hour Encryption Refresh. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.74 |
| smLEDModeFlag To set LED Panel Operation to Revised Mode(1) or to Legacy Mode(0) | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.75 |
| ethAccessEnable To enable or disable Ethernet Port access to SM Management Functions.
(1) - Ethernet access to SM Management allowed.
(0) - Ethernet access to SM Management blocked. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.76 |
| pppoeEnable Enable or disable PPPoE on the SM. NAT MUST be enabled prior and Translation Bridging MUST be DISABLED on the AP. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.77 |
| pppoeAuthenticationType Set the PPPoE Authentication Type to either None or CHAP/pap | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.78 |
| pppoeAccessConcentrator Set the PPPoE Access Concentrator Name. Less than or equal to 32 characters | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.1.79 |
| enable8023link deprecated To enable or disable 802.3 link. For SMs only. Deprecated: Use enable8023linkBox instead. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.8 |
| pppoeServiceName Set the PPPoE Service Name. Less than or equal to 32 characters | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.1.80 |
| pppoeUserName Set the PPPoE Username. Less than or equal to 32 characters | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.1.81 |
| pppoePassword Set the PPPoE Password. Less than or equal to 32 characters | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.1.82 |
| pppoeTCPMSSClampEnable Enable or disable TCP MSS Clamping. Enabling this will cause the SM to edit the TCP MSS in TCP SYN and SYN-ACK packets.
This will allow for a workaround for MTU issues so that th… | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.83 |
| pppoeMTUOverrideEnable Enable the overriding of the PPP link's MTU. Normally, the PPP link will set the MTU to the MRU of the
PPPoE Server, but this may be overridden. If the MRU of the PPPoE server i… | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.84 |
| pppoeMTUOverrideValue Enable the overriding of the PPP link's MTU. Normally, the PPP link will set the MTU to the MRU of the
PPPoE Server, but this may be overridden. If the MRU of the PPPoE server i… | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.85 |
| pppoeTimerType Set the PPPoE Timer type. Can be a Keep Alive timer where the link will be checked periodically and
automatically redialed if the link is down. Also could be an Idle Timeout whe… | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.86 |
| pppoeTimeoutPeriod The Timeout Period. The use of this depends on the Timer Type. If the Timer Type is KeepAlive, then
the timeout period is in seconds. If the Timer Type is Idle Timeout, then th… | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.87 |
| timedSpectrumAnalysisDuration deprecated As of release 13.0.2 this value is depricated. Please use the OID in whispBoxConfig.
Value in seconds for a timed spectrum analysis. Range is 10-1000 seconds. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.88 |
| spectrumAnalysisOnBoot To enable or disable Spectrum Analysis on boot up for one scan through the band.
(0) - Disabled
(1) - Enabled | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.89 |
| authKeyOption This option is for SMs only. Backhaul timing slave always
uses the set key.
0 - Use default key.
1 - Use set key. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.9 |
| spectrumAnalysisAction deprecated As of release 13.0.2, this OID has been deprecated. Please use the OID in whispBoxConfig.
Start or stop timed or continuous Spectrum Analysis and also give status.
(0) - Stop Spec… | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.90 |
| pppoeConnectOD Force a manual PPPoE connection attempt. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.91 |
| pppoeDisconnectOD Force a manual PPPoE disconnection. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.92 |
| smAntennaType obsolete Deprecated. See whispBoxStatus.antType for antenna type information. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.93 |
| natConnectionType To configure the SM NAT connection type. Options are Static IP, DHCP, or PPPoE. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.94 |
| wanPingReplyEnable Allow Ping replies from SM WAN interface. Applies to both NAT and PPPoE WAN interfaces. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.95 |
| packetFilterDirection obsolete To packet filter direction when NAT is disabled. Upstream is default.
Obsolete - Use corresponding OID in whipsBoxConfig MIB. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.96 |
| colorCode2 deprecated Second Color code. The variable is deprecated. See additionalColorCode in whispSmConfig. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.97 |
| colorCodepriority2 deprecated Priority setting for the second color code. The variable is deprecated.
See additionalColorCodePriority in whispSmConfig. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.1.98 |
| colorCode3 deprecated Third Color code. The variable is deprecated. See additionalColorCode in whispSmConfig. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.1.99 |