adaptRateHighPri
WHISP-SM-MIB ·
.1.3.6.1.4.1.161.19.3.2.2.129
Object
scalar
Enumeration
The current transmitting rate of the high priority VC. -1 : High Priority Channel not configured 0 : SM is not in session 1 : 1X QPSK SISO 2 : 2X 16-QAM SISO or QPSK MIMO 3 : 3X 64-QAM SISO 4 : 4X 256-QAM SISO or 16-QAM MIMO 6 : 6X 64-QAM MIMO 8 : 8X 256-QAM MIMO
Context
- MIB
- WHISP-SM-MIB
- OID
.1.3.6.1.4.1.161.19.3.2.2.129- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- whispSmStatus
- Siblings
- 133
Syntax
Enumeration
Values & Constraints
Enumerated Values
-1 | noHighPriorityChannel |
0 | noSession |
1 | rate1X |
2 | rate2X |
3 | rete3X |
4 | rate4X |
6 | rate6X |
8 | rate8X |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sessionStatus SM registered or not. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.2.1 |
| dhcpCip Assigned IP address to DHCP client. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.2.2.10 |
| bridgecbDownlinkCreditLimit Uplink Burst Allocation. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.161.19.3.2.2.100 |
| mimoQpskBerDisplay QPSK BER statistics.
MIMO platforms only. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.2.101 |
| mimo16QamBerDisplay 16-QAM BER statistics
MIMO platforms only.
Engineering use only. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.2.102 |
| mimo64QamBerDisplay 64-QAM BER statistics
MIMO platforms only.
Engineering use only. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.2.103 |
| mimo256QamBerDisplay 256-QAM BER statistics
MIMO platforms only.
Engineering use only. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.2.104 |
| mimoBerRcvModulationType Receive modulation type.
MIMO platforms only. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.2.105 |
| signalToNoiseRatioSMHorizontal An estimated signal to noise ratio based on the last received data for horizontal antenna.
MIMO radios only.
Will return zero if Signal to Noise Ratio Calculation is disabled.
Whe… | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.2.106 |
| maxRadioDbmDeprecated deprecated This OID was inadvertently moved in 12.0.2. Please use maxRadioDbm. This OID is deprecated
and kept for backwards compatibility. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.2.107 |
| signalStrengthRatio Signal Strength Ratio in dB is the power received by the vertical antenna input (dB) -
power received by the horizontal antenna input (dB).
MIMO radios only. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.2.108 |
| fragmentsReceived1XHorizontal Engineering use only.
Number of fragments received in 1x modulation.
For MIMO radios only.
For MIMO this is the horizontal path.
Fragments received in MIMO-A will only be counted … | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.2.2.109 |
| dhcpSip Public DHCP server IP. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.2.2.11 |
| fragmentsReceived2XHorizontal Engineering use only.
Number of fragments received in 2x modulation.
For MIMO radios only.
For MIMO this is the horizontal path.
Fragments received in MIMO-A will only be counted … | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.2.2.110 |
| fragmentsReceived3XHorizontal Engineering use only.
Number of fragments received in 3x modulation.
For MIMO radios only.
For MIMO this is the horizontal path.
Fragments received in MIMO-A will only be counted … | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.2.2.111 |
| fragmentsReceived4XHorizontal Engineering use only.
Number of fragments received in 4x modulation.
For MIMO radios only.
For MIMO this is the horizontal path.
Fragments received in MIMO-A will only be counted … | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.2.2.112 |
| linkQualityData1XHorizontal Engineering use only.
Link Quality for the data VC for QPSK modulation (1X).
For MIMO radios only.
For MIMO this is the horizontal path.
Fragments received in MIMO-A will only be … | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.2.113 |
| linkQualityData2XHorizontal Engineering use only.
Link Quality for the data VC for 16-QAM modulation (2X).
For MIMO radios only.
For MIMO this is the horizontal path.
Fragments received in MIMO-A will only b… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.2.114 |
| linkQualityData3XHorizontal Engineering use only.
Link Quality for the data VC for 64-QAM modulation (3X).
For MIMO radios only.
For MIMO this is the horizontal path.
Fragments received in MIMO-A will only b… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.2.115 |
| linkQualityData4XHorizontal Engineering use only.
Link Quality for the data VC for 256-QAM modulation (4X).
For MIMO radios only.
For MIMO this is the horizontal path.
Fragments received in MIMO-A will only … | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.2.116 |
| radioDbmHorizontal Receive power level of the horizontal antenna in dBm.
MIMO radios only. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.2.117 |
| radioDbmVertical Receive power level of the vertical antenna in dBm.
MIMO radios only. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.2.118 |
| bridgecbDownlinkMaxBurstBitRate Maximum burst downlink rate. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.161.19.3.2.2.119 |
| dhcpClientLease DHCP client lease time. | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.161.19.3.2.2.12 |
| bridgecbUplinkMaxBurstBitRate Maximum burst uplink Rate. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.161.19.3.2.2.120 |
| currentCyclicPrefix The Current Cyclic Prefix of the AP/BHM when in session. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.2.121 |
| currentBandwidth The Current Bandwidth of the AP/BHM when in session. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.2.122 |
| berPwrRxFPGAPathA BER power level on FPGA Rx Path A of SM. Engineering Use Only. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.2.123 |
| berPwrRxFPGAPathB BER power level on FPGA Rx Path B of SM. Engineering Use Only. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.2.124 |
| rawBERPwrRxPathA Raw unadjusted BER power level on FPGA Rx Path A of SM. Engineering Use Only. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.2.125 |
| rawBERPwrRxPathB Raw unadjusted BER power level on FPGA Rx Path B of SM. Engineering Use Only. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.2.126 |
| radioModeStatus deprecated The current radio mode that SM is operating in.
PMP 430 SMs only.
As of 14.2, the 430 SM only supports PMP 450
interoperability mode, so this will only return
pmp450Interoperabili… | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.2.127 |
| adaptRateLowPri The current transmitting rate of the low priority VC.
0 : SM is not in session
1 : 1X QPSK SISO
2 : 2X 16-QAM SISO or QPSK MIMO
3 : 3X 64-QAM SISO
4 : 4X 256-QAM SISO or 16-QAM MI… | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.2.128 |
| dhcpCSMask Public DHCP server subnet mask. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.2.2.13 |
| bitErrorsQSPKpathA Number of bit errors received from BER packet at QPSK path A.
Valid MIMO platforms only. | scalar | SNMPv2-SMICounter64 | .1.3.6.1.4.1.161.19.3.2.2.130 |
| bitErrorsQSPKpathB Number of bit errors received from BER packet at QPSK path B.
Valid MIMO platforms only. | scalar | SNMPv2-SMICounter64 | .1.3.6.1.4.1.161.19.3.2.2.131 |
| bitErrors16QAMpathA Number of bit errors received from BER packet at 16-QAM path A.
Valid MIMO platforms only.
Engineering use only. | scalar | SNMPv2-SMICounter64 | .1.3.6.1.4.1.161.19.3.2.2.132 |
| bitErrors16QAMpathB Number of bit errors received from BER packet at 16-QAM path B.
Valid MIMO platforms only.
Engineering use only. | scalar | SNMPv2-SMICounter64 | .1.3.6.1.4.1.161.19.3.2.2.133 |
| bitErrors64QAMpathA Number of bit errors received from BER packet at 64-QAM path A.
Valid MIMO platforms only.
Engineering use only. | scalar | SNMPv2-SMICounter64 | .1.3.6.1.4.1.161.19.3.2.2.134 |
| bitErrors64QAMpathB Number of bit errors received from BER packet at 64-QAM path B.
Valid MIMO platforms only.
Engineering use only. | scalar | SNMPv2-SMICounter64 | .1.3.6.1.4.1.161.19.3.2.2.135 |
| bitErrors256QAMpathA Number of bit errors received from BER packet at 256-QAM path A.
Valid MIMO platforms only.
Engineering use only. | scalar | SNMPv2-SMICounter64 | .1.3.6.1.4.1.161.19.3.2.2.136 |
| bitErrors256QAMpathB Number of bit errors received from BER packet at 256-QAM path B.
Valid MIMO platforms only.
Engineering use only. | scalar | SNMPv2-SMICounter64 | .1.3.6.1.4.1.161.19.3.2.2.137 |
| bitsReceivedPerPathModulation Number of bit received from BER.
To calculate Bit Error Rate, take bit errors at a modulation and path and divide by this OID.
To get combined BER add errors and divide by this mu… | scalar | SNMPv2-SMICounter64 | .1.3.6.1.4.1.161.19.3.2.2.138 |
| beaconsPercentReceived The current percentage of beacons that the SM/BHS successfully receiving. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.2.139 |
| dhcpDfltRterIP Public default router IP address. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.2.2.14 |
| mapsPercentReceived PMP 450 only.
The current percentage of scheduling maps that the SM/BHS successfully receiving. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.2.140 |
| natTslTableEntries Number of Entries in NAT Translation Table. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.2.141 |
| maxReceivePower Maximum receive power level for this session.
MIMO radios only. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.2.142 |
| beaconsPercentMinReceived The percentage of the least number of beacons that the SM/BHS successfully received in a 16 second window for the last 15 minutes. This will be updated only once in 15 minutes. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.2.143 |
| beaconsPercentMaxReceived The percentage of the maximum number of beacons that the SM/BHS successfully received in a 16 second window for the last 15 minutes. This will be updated only once in 15 minutes. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.2.144 |
| beaconsPercentReceivedSnapshot The percentage of beacons that the SM/BHS successfully received for the last 15 minutes. This will be updated only once in 15 minutes. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.2.145 |
| smSectorID The current Sector ID of the Registered AP/BHM.
A value of -1 is return when the device is not registered or AP/BHM does not support Sector ID. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.2.146 |
| scanCycleCount The number of scan cycles. This increments after the SM completes scanning every configured frequency and channel bandwidth. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.2.2.147 |
| bridgeCbErrStatBridgeDropCount Packet drop count for hosts with MAC address not in bridge table | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.2.2.148 |
| dhcpcdns1 Primary public domain name server. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.2.2.15 |
| dhcpcdns2 Secondary public domain name server. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.2.2.16 |
| dhcpcdns3 Third public domain name server. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.2.2.17 |
| dhcpDomName Public domain name server. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.2.18 |
| dhcpServerTable The table of DHCP server hosts. | table | - | .1.3.6.1.4.1.161.19.3.2.2.19 |
| rssi Radio signal strength index. FSK only. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.2.2 |
| adaptRate VC adapt rate. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.2.20 |
| radioDbmInt Radio power level(integer).
For MIMO radios this is the combined power of the horiztontal and vertical paths. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.2.21 |
| dfsStatus Dynamic frequency shifting status. For DFS Radio only. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.2.22 |
| radioTxPwr Tx Power level. Valid for FSK and OFDM SMs. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.2.23 |
| activeRegion The active region of the radio. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.2.24 |
| snmpBerLevel BER level.
For PMP 450 systems: 2=MIMO QPSK, 4=MIMO 16-QAM, 6=MIMO64-QAM, 8=256-QAM
For non PMP 450: 2=2 level BER, 4=4 level BER. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.2.25 |
| nbBitsRcvd Number of BER bits received (non MIMO platforms only). | scalar | SNMPv2-SMICounter64 | .1.3.6.1.4.1.161.19.3.2.2.26 |
| nbPriBitsErr Number of Primary bit errors (non MIMO platforms only). | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.2.2.27 |
| nbSndBitsErr Number of secondary bit errors (non MIMO platforms only). | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.2.2.28 |
| primaryBER obsolete Obsoleted, invalid type to represent this data. Measured Primary Bit Error Rate. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.2.29 |
| jitter A measure of multipath interference. Applicable to FSK radios only. | scalar | Unsigned32 | .1.3.6.1.4.1.161.19.3.2.2.3 |
| secondaryBER obsolete Obsoleted, invalid type to represent this data. Measured Secondary Bit Error Rate. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.2.30 |
| totalBER obsolete Obsoleted, invalid type to represent this data. Measured Total Bit Error Rate. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.2.31 |
| minRSSI Measured Min. RSSI. Applicable to FSK radios only. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.2.32 |
| maxRSSI Measured Max. RSSI. Applicable to FSK radios only. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.2.33 |
| minJitter Measured Min. Jitter. Applicable to FSK radios only. | scalar | Unsigned32 | .1.3.6.1.4.1.161.19.3.2.2.34 |
| maxJitter Measured Max. Jitter. Applicable to FSK radios only. | scalar | Unsigned32 | .1.3.6.1.4.1.161.19.3.2.2.35 |
| smSessionTimer SM current session timer. | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.161.19.3.2.2.36 |
| pppoeSessionStatus Current PPPoE Session Status | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.2.37 |
| pppoeSessionID Current PPPoE Session ID | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.2.38 |
| pppoeIPCPAddress Current PPPoE IPCP IP Address | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.2.2.39 |
| airDelay Round trip delay in bits. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.161.19.3.2.2.4 |
| pppoeMTUOverrideEn Current PPPoE MTU Override Setting | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.2.40 |
| pppoeMTUValue Current PPPoE MTU Value | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.2.41 |
| pppoeTimerTypeValue Current PPPoE Timer Type. 0 is disabled, 1 is Keep Alive timer, and 2 is Idle Timeout timer. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.2.42 |
| pppoeTimeoutValue Current PPPoE Timeout Period. The use of this depends on the Timer Type. If the Timer Type is KeepAlive, then
the timeout period is in seconds. If the Timer Type is Idle Timeou… | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.2.43 |
| pppoeDNSServer1 PPPoE DNS Server 1 | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.2.2.44 |
| pppoeDNSServer2 PPPoE DNS Server 2 | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.2.2.45 |
| pppoeControlBytesSent PPPoE Control Bytes Sent | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.2.2.46 |
| pppoeControlBytesReceived PPPoE Control Bytes Received | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.2.2.47 |
| pppoeDataBytesSent PPPoE Data Bytes Sent | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.2.2.48 |
| pppoeDataBytesReceived PPPoE Data Bytes Received | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.2.2.49 |
| radioSlicingSm obsolete This variable is deprecated. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.2.5 |
| pppoeEnabledStatus PPPoE Enabled | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.2.50 |
| pppoeTCPMSSClampEnableStatus PPPoE TCP MSS Clamping Enable | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.2.51 |
| pppoeACNameStatus Current PPPoE Access Concentrator In Use | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.2.52 |
| pppoeSvcNameStatus Current PPPoE Service Name In Use | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.2.53 |
| pppoeSessUptime Uptime of current PPPoE Session in ticks | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.161.19.3.2.2.54 |
| primaryBERDisplay Measured Primary Bit Error Rate.
Non MIMO platforms only. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.2.55 |
| secondaryBERDisplay Measured Secondary Bit Error Rate.
FSK platforms only. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.2.56 |
| totalBERDisplay Measured Total Bit Error Rate.
For MIMO this is combined both paths. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.2.57 |
| minRadioDbm Maximum receive power of beacon in dBm.
For MIMO radios, this is only available in the vertical path. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.2.58 |
| maxRadioDbm Maximum receive power in dBm (rounded to nearest integer). | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.2.59 |
| radioTxGainSm Radio transmission gain setting. Applicable to FSK radios only. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.2.6 |
| pppoeSessIdleTime Idle Time of current PPPoE Session in ticks | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.161.19.3.2.2.60 |
| radioDbmAvg Average Receive Power of the AP's beacon in dBm.
OFDM Radios only.
For MIMO this is only the verical path, as the beacon is not transmitted on horizontal. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.2.61 |
| zoltarFPGAFreqOffset FPGA peek of 70001088 | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.2.62 |
| zoltarSWFreqOffset FPGA peek of 7000108C | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.2.63 |
| airDelayns Round trip delay in nanoseconds. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.161.19.3.2.2.64 |
| currentColorCode The current Color Code of the Registered AP/BHM. A value of -1 is return when the device is not registered. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.2.65 |
| currentColorCodePri The current priority of the Registered color code | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.2.2.66 |
| currentChanFreq The Current Channel Frequency of the AP/BHM when in session. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.161.19.3.2.2.67 |
| linkQualityBeacon Engineering only.
Link Quality for incoming beacons.
For Gen II OFDM radios and forward.
For PMP 450 and forward this is vertical path. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.2.68 |
| calibrationStatus deprecated Varible deprecated. Please use calibrationStatusBox. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.2.7 |
| dhcpServerPktXmt Number of packets transmitted by SM DHCP Server | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.2.2.72 |
| dhcpServerPktRcv Number of packets received by SM DHCP Server | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.2.2.73 |
| dhcpServerPktToss Number of packets tossed by SM DHCP Server | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.2.2.74 |
| radioDbm Rx Power level.
For MIMO this is the combined power of the horizontal and vertical paths. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.2.8 |
| receiveFragmentsModulationPercentage Engineering use only.
The percentage of recent fragments received at which modulation.
For Gen II OFDM only and forward. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.2.86 |
| fragmentsReceived1XVertical Engineering use only.
Number of fragments received in 1x modulation.
For GenII OFDM only and forward.
For MIMO this is the vertical path. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.2.2.87 |
| fragmentsReceived2XVertical Engineering use only.
Number of fragments received in 2x modulation.
For GenII OFDM only and forward.
For MIMO this is the vertical path. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.2.2.88 |
| fragmentsReceived3XVertical Engineering use only.
Number of fragments received in 3x modulation.
For GenII OFDM only and forward.
For MIMO this is the vertical path. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.2.2.89 |
| registeredToAp AP MAC address that the SM registered to. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.2.9 |
| fragmentsReceived4XVertical Engineering use only.
Number of fragments received in 4x modulation.
For GenII OFDM only and forward.
For MIMO this is the vertical path. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.2.2.90 |
| linkQualityData1XVertical Engineering use only.
Link Quality for the data VC for QPSK modulation (1X).
For Gen II OFDM radios and forward only.
For MIMO this is the vertical path. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.2.91 |
| linkQualityData2XVertical Engineering use only.
Link Quality for the data VC for 16-QAM modulation (2X).
For Gen II OFDM radios and forward only.
For MIMO this is the vertical path. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.2.92 |
| linkQualityData3XVertical Engineering use only.
Link Quality for the data VC for 64-QAM modulation (3X).
For Gen II OFDM radios and forward only.
For MIMO this is the vertical path. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.2.93 |
| linkQualityData4XVertical Engineering use only.
Link Quality for the data VC for 256-QAM modulation (4X).
For Gen II OFDM radios and forward only.
For MIMO this is the vertical path. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.2.2.94 |
| signalToNoiseRatioSMVertical An estimated signal to noise ratio based on the last received data.
For GenII OFDM only and forward.
For MIMO this is the vertical antenna.
Will return zero if Signal to Noise Rat… | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.2.2.95 |
| rfStatTxSuppressionCount RF Scheduler Stats DFS TX Suppression Count | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.2.2.96 |
| bridgecbUplinkCreditRate Sustained uplink data rate. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.161.19.3.2.2.97 |
| bridgecbUplinkCreditLimit Uplink Burst Allocation. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.161.19.3.2.2.98 |
| bridgecbDownlinkCreditRate Sustained uplink data rate. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.161.19.3.2.2.99 |