gwAdmConfSnmpAdminCommStr
WHISP-PLV-GATEWAY-MIB ·
.1.3.6.1.4.1.161.19.3.8.1.1.5.12
Object
scalar
r/w
OctetString
This object is used to configure SNMP 'Admin' community string of the Gateway.
Context
- MIB
- WHISP-PLV-GATEWAY-MIB
- OID
.1.3.6.1.4.1.161.19.3.8.1.1.5.12- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- whispPlvGwAdmConfig
- Siblings
- 24
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| gwAdmConfLoginUsername This object is used to configure Gateway's System Management Login Username. | scalar | OctetString | .1.3.6.1.4.1.161.19.3.8.1.1.5.1 |
| gwAdmConfSnmpGetCommStr This object is used to configure SNMP 'Read' community string of the Gateway. | scalar | OctetString | .1.3.6.1.4.1.161.19.3.8.1.1.5.10 |
| gwAdmConfSnmpSetCommStr This object is used to configure SNMP 'Read-Write' community string of the Gateway. | scalar | OctetString | .1.3.6.1.4.1.161.19.3.8.1.1.5.11 |
| gwAdmConfFtpServerIp This object is used to configure IP Address of FTP server hosting auto-upgrade files. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.8.1.1.5.13 |
| gwAdmConfFtpUsername This object is used to configure Username to login to a FTP server,
for use with FTP-based auto-upgrade. | scalar | OctetString | .1.3.6.1.4.1.161.19.3.8.1.1.5.14 |
| gwAdmConfFtpPassword This object is used to configure Password to login to a FTP server,
for use with FTP-based auto-upgrade. | scalar | OctetString | .1.3.6.1.4.1.161.19.3.8.1.1.5.15 |
| gwAdmConfFtpFile This object is used to configure Path and/or Filename of the firmware file,
for use with FTP-based auto-upgrade. | scalar | OctetString | .1.3.6.1.4.1.161.19.3.8.1.1.5.16 |
| gwAdmConfDeviceUpgradeStart This object is used to Start Device Firmware Upgrade process in the Gateway.
To start the upgrade process, this object should be set to '1'. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.8.1.1.5.17 |
| gwAdmConfSimUpgradeStart This object is used to start Intellon Simple Module Firmware Upgrade process in the Gateway.
To start the upgrade process, this object should be set to '1'. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.8.1.1.5.18 |
| gwAdmConfSystemReboot This object is used to Reboot the Gateway.
To reboot the Gateway, this object should be set to '1'. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.8.1.1.5.19 |
| gwAdmConfLoginPassword This object is used to configure Gateway's System Management Login Password. | scalar | OctetString | .1.3.6.1.4.1.161.19.3.8.1.1.5.2 |
| gwAdmConfReset This object is used to reset the Gateway configuration to Factory Defaults.
To reset the Gateway configuration to factory defaults, this object should
be set to '1'. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.8.1.1.5.20 |
| gwAdmConfDeviceMode This object is used to configure the device in 'switch' mode or 'NAT' mode. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.8.1.1.5.21 |
| gwAdmConfLUIDStart This object is used to configure the starting value of the Modem LUID range.
This value should not be greater than gwAdmConfLUIDEnd value | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.8.1.1.5.22 |
| gwAdmConfLUIDEnd This object is used to configure the ending value of the Modem LUID range.
This value should not be less than gwAdmConfLUIDStart value | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.8.1.1.5.23 |
| gwAdmConfVLANPassthroughStatus This object is used to enable or disable VLAN Passthrough feature. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.8.1.1.5.24 |
| gwAdmConfManagementVLANId This object is used to enable or disable VLAN Passthrough feature. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.8.1.1.5.25 |
| gwAdmConfNEK This object is used to configure Network Encryption Key of the Gateway. | scalar | OctetString | .1.3.6.1.4.1.161.19.3.8.1.1.5.3 |
| gwAdmConfAuthServIp1 This object is used to configure BAM Server #1 IP Address. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.8.1.1.5.4 |
| gwAdmConfAuthServIp2 This object is used to configure BAM Server #2 IP Address. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.8.1.1.5.5 |
| gwAdmConfAuthServIp3 This object is used to configure BAM Server #3 IP Address. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.8.1.1.5.6 |
| gwAdmConfAuthMode This object is used to Enable or Disable BAM Authentication on the Gateway. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.8.1.1.5.7 |
| gwAdmConfAuthKey This object is used to configure Authentication Key, to use with BAM Server,
on the Gateway. | scalar | OctetString | .1.3.6.1.4.1.161.19.3.8.1.1.5.8 |
| gwAdmConfAuthKeyOption This object is used to configure the Authentication Key to be used, on the
Gateway. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.8.1.1.5.9 |