timeZone
WHISP-APS-MIB ·
.1.3.6.1.4.1.161.19.3.1.1.89
Object
scalar
r/w
Integer32
Set the timezone offset for the radio. This change takes affect dynamically. The available timezones are: 0 : (UTC) UTC - Coordinated Universal Time 1 : (UTC) GMT - Greenwich Mean Time 2 : (UTC) WET - Western European Time 3 : (UTC-12) BIT - Baker Island Time 4 : (UTC-11) SST - Samoa Standard Time 5 : (UTC-10) CKT - Cook Island Time 6 : (UTC-10) HAST - Hawaii-Aleutian Standard Time 7 : (UTC-10) HST - Hawaii Standard Time 8 : (UTC-10) TAHT - Tahiti Time 9 : (UTC-09:30) MIT - Marquesas Islands Time 10 : (UTC-09) AKST - Alaska Standard Time 11 : (UTC-09) GIT - Gambier Island Time 12 : (UTC-09) HADT - Hawaii-Aleutian Daylight Time 13 : (UTC-08) AKDT - Alaska Daylight Time 14 : (UTC-08) CIST - Clipperton Island Standard Time 15 : (UTC-08) PST - Pacific Standard Time (North America) 16 : (UTC-07) MST - Mountain Standard Time (North America) 17 : (UTC-07) PDT - Pacific Daylight Time (North America) 18 : (UTC-06) CST - Central Standard Time (North America) 19 : (UTC-06) EAST - Easter Island Standard Time 20 : (UTC-06) GALT - Galapagos Time 21 : (UTC-06) MDT - Mountain Daylight Time (North America) 22 : (UTC-05) CDT - Central Daylight Time (North America) 23 : (UTC-05) COT - Colombia Time 24 : (UTC-05) ECT - Ecuador Time 25 : (UTC-05) EST - Eastern Standard Time (North America) 26 : (UTC-04:30) VET - Venezuelan Standard Time 27 : (UTC-04) AST - Atlantic Standard Time 28 : (UTC-04) BOT - Bolivia Time 29 : (UTC-04) CLT - Chile Standard Time 30 : (UTC-04) COST - Colombia Summer Time 31 : (UTC-04) ECT - Eastern Caribbean Time (does not recognise DST) 32 : (UTC-04) EDT - Eastern Daylight Time (North America) 33 : (UTC-04) FKT - Falkland Islands Time 34 : (UTC-04) GYT - Guyana Time 35 : (UTC-03:30) NST - Newfoundland Standard Time 36 : (UTC-03:30) NT - Newfoundland Time 37 : (UTC-03) ADT - Atlantic Daylight Time 38 : (UTC-03) ART - Argentina Time 39 : (UTC-03) BRT - Brasilia Time 40 : (UTC-03) CLST - Chile Summer Time 41 : (UTC-03) FKST - Falkland Islands Summer Time 42 : (UTC-03) GFT - French Guiana Time 43 : (UTC-03) UYT - Uruguay Standard Time 44 : (UTC-02:30) NDT - Newfoundland Daylight Time 45 : (UTC-02) GST - South Georgia and the South Sandwich Islands 46 : (UTC-02) UYST - Uruguay Summer Time 47 : (UTC-01) AZOST - Azores Standard Time 48 : (UTC-01) CVT - Cape Verde Time 49 : (UTC+01) BST - British Summer Time (British Standard Time from Feb 1968 to Oct 1971) 50 : (UTC+01) CET - Central European Time 51 : (UTC+01) DFT - AIX specific equivalent of Central European Time 52 : (UTC+01) IST - Irish Summer Time 53 : (UTC+01) WAT - West Africa Time 54 : (UTC+01) WEDT - Western European Daylight Time 55 : (UTC+01) WEST - Western European Summer Time 56 : (UTC+02) CAT - Central Africa Time 57 : (UTC+02) CEDT - Central European Daylight Time 58 : (UTC+02) CEST - Central European Summer Time 59 : (UTC+02) EET - Eastern European Time 60 : (UTC+02) IST - Israel Standard Time 61 : (UTC+02) SAST - South African Standard Time 62 : (UTC+03) AST - Arab Standard Time (Kuwait, Riyadh) 63 : (UTC+03) AST - Arabic Standard Time (Baghdad) 64 : (UTC+03) EAT - East Africa Time 65 : (UTC+03) EEDT - Eastern European Daylight Time 66 : (UTC+03) EEST - Eastern European Summer Time 67 : (UTC+03) MSK - Moscow Standard Time 68 : (UTC+03:30) IRST - Iran Standard Time 69 : (UTC+04) AMT - Armenia Time 70 : (UTC+04) AST - Arabian Standard Time (Abu Dhabi, Muscat) 71 : (UTC+04) AZT - Azerbaijan Time 72 : (UTC+04) GET - Georgia Standard Time 73 : (UTC+04) MSD - Moscow Summer Time 74 : (UTC+04) MUT - Mauritius Time 75 : (UTC+04) RET - Reunion Time 76 : (UTC+04) SAMT - Samara Time 77 : (UTC+04) SCT - Seychelles Time 78 : (UTC+04:30) AFT - Afghanistan Time 79 : (UTC+05) AMST - Armenia Summer Time 80 : (UTC+05) HMT - Heard and McDonald Islands Time 81 : (UTC+05) PKT - Pakistan Standard Time 82 : (UTC+05) YEKT - Yekaterinburg Time 83 : (UTC+05:30) IST - Indian Standard Time 84 : (UTC+05:30) SLT - Sri Lanka Time 85 : (UTC+05:45) NPT - Nepal Time 86 : (UTC+06) BIOT - British Indian Ocean Time 87 : (UTC+06) BST - Bangladesh Standard Time 88 : (UTC+06) BTT - Bhutan Time 89 : (UTC+06) OMST - Omsk Time 90 : (UTC+06:30) CCT - Cocos Islands Time 91 : (UTC+06:30) MST - Myanmar Standard Time 92 : (UTC+07) CXT - Christmas Island Time 93 : (UTC+07) ICT - Indochina Time 94 : (UTC+07) KRAT - Krasnoyarsk Time 95 : (UTC+07) THA - Thailand Standard Time 96 : (UTC+08) ACT - ASEAN Common Time 97 : (UTC+08) AWST - Australian Western Standard Time 98 : (UTC+08) BDT - Brunei Time 99 : (UTC+08) CST - China Standard Time 100 : (UTC+08) HKT - Hong Kong Time 101 : (UTC+08) IRKT - Irkutsk Time 102 : (UTC+08) MST - Malaysian Standard Time 103 : (UTC+08) PST - Philippine Standard Time 104 : (UTC+08) SST - Singapore Standard Time 105 : (UTC+09) AWDT - Australian Western Daylight Time 106 : (UTC+09) JST - Japan Standard Time 107 : (UTC+09) KST - Korea Standard Time 108 : (UTC+09) YAKT - Yakutsk Time 109 : (UTC+09:30) ACST - Australian Central Standard Time 110 : (UTC+10) AEST - Australian Eastern Standard Time 111 : (UTC+10) ChST - Chamorro Standard Time 112 : (UTC+10) VLAT - Vladivostok Time 113 : (UTC+10:30) ACDT - Australian Central Daylight Time 114 : (UTC+10:30) LHST - Lord Howe Standard Time 115 : (UTC+11) AEDT - Australian Eastern Daylight Time 116 : (UTC+11) MAGT - Magadan Time 117 : (UTC+11) SBT - Solomon Islands Time 118 : (UTC+11:30) NFT - Norfolk Time[1] 119 : (UTC+12) FJT - Fiji Time 120 : (UTC+12) GILT - Gilbert Island Time 121 : (UTC+12) PETT - Kamchatka Time 122 : (UTC+12:45) CHAST - Chatham Standard Time 123 : (UTC+13) PHOT - Phoenix Island Time 124 : (UTC+14) LINT - Line Islands Time
Context
- MIB
- WHISP-APS-MIB
- OID
.1.3.6.1.4.1.161.19.3.1.1.89- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- whispApsConfig
- Siblings
- 139
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-124
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| gpsInput obsolete The variable is deprecated. See gpsInput in whispBoxConfig. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.1 |
| numCtlSlots obsolete This OID is deprecated, please use numCtlSlotsHW. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.1.1.10 |
| accountingSmReAuthInterval Select Interval for Reauthentication of SM | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.1.1.100 |
| syslogDomainNameAppend deprecated This attribute is deprecated. Use syslogDomainNameAppend in whispBoxAttributesGroup | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.101 |
| syslogServerAddr deprecated This attribute is deprecated. Use syslogServerAddr in whispBoxAttributesGroup | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.1.1.102 |
| syslogServerPort This attribute is deprecated. Use syslogServerPort in whispBoxAttributesGroup | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.1.1.103 |
| syslogXmitAP Enables/Disables transmission of Syslogs from AP/BHM | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.104 |
| syslogXmitSMs Enables/Disables transmission of Syslogs from connected SMs/BHS. This can be over-ridden by the setting on individual SMs/ the BHS. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.105 |
| accountingInterimUpdateInterval Select Interval for Interim Updates | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.1.1.106 |
| gpsOutputEn Enable or Disable GPS sync output enable. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.107 |
| removeIdleSMs Setting this to a value 1 will remove all SMs which are in Idle state from AP's Session list. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.108 |
| lastTimeIdleSMsRemoved Displays the timestamp of last removal of Idle SMs from AP's Session list | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.1.1.109 |
| numCtlSlotsReserveHigh obsolete Total number of High priority upstream control (contention) slots. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.1.1.11 |
| userAuthSharedSecret1 User Authentication Server 1 Shared Secret. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.1.1.110 |
| userAuthSharedSecret2 User Authentication Server 2 Shared Secret. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.1.1.111 |
| userAuthSharedSecret3 User Authentication Server 3 Shared Secret. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.1.1.112 |
| trapDelayAfterBootup Delays sending of SNMP traps after radio boots up for this many number of seconds. | scalar | seconds Integer32 | .1.3.6.1.4.1.161.19.3.1.1.113 |
| upLnkDataRate Sustained uplink bandwidth cap. | scalar | Kilobits/sec Integer32 | .1.3.6.1.4.1.161.19.3.1.1.12 |
| upLnkLimit Burst uplink bandwidth cap. | scalar | Kilobits/sec Integer32 | .1.3.6.1.4.1.161.19.3.1.1.13 |
| dwnLnkDataRate Sustained downlink bandwidth cap. | scalar | Kilobits/sec Integer32 | .1.3.6.1.4.1.161.19.3.1.1.14 |
| dwnLnkLimit Burst downlink bandwidth cap. | scalar | Kilobits/sec Integer32 | .1.3.6.1.4.1.161.19.3.1.1.15 |
| sectorID Advertise sector number for an AP.
Not supported on 450 platform. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.1.1.16 |
| maxRange deprecated This attribute is deprecated. Please see radioMaxRange. | scalar | miles Integer32 | .1.3.6.1.4.1.161.19.3.1.1.17 |
| airLinkSecurity obsolete Air Link Security.
desEnhancedAndAuthentication(2) and authenticationIfAvailable(3)
are only for APAS. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.18 |
| berMode obsolete AP backgroup BER mode. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.19 |
| rfFreqCarrier deprecated The primary transmit frequency.
Also see radioFreqCarrier. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.2 |
| asIP1 obsolete Obsoleted. Configure with whispApsDNS.authServer1. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.1.1.20 |
| radioMode obsolete This OID is obsolete. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.206 |
| rfTelnetAccess Allows/prohibits uplink Telnet access (SM->AP). | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.207 |
| upLnkMaxBurstDataRate Maximum burst uplink rate. | scalar | Kilobits/sec Integer32 | .1.3.6.1.4.1.161.19.3.1.1.208 |
| dwnLnkMaxBurstDataRate Maximum burst downlink rate. | scalar | Kilobits/sec Integer32 | .1.3.6.1.4.1.161.19.3.1.1.209 |
| asIP2 obsolete Obsoleted. Configure with whispApsDNS.authServer2. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.1.1.21 |
| rfPPPoEPADIForwarding Enables/disables forwarding of PPPoE PADI packets from AP to SM. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.210 |
| allowedIPAccessNMLength1 Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.1.1.211 |
| allowedIPAccessNMLength2 Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.1.1.212 |
| allowedIPAccessNMLength3 Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.1.1.213 |
| bridgeFloodUnknownsEnable Forward unicast packets with an unknown address to all SMs. This can significantly reduce downlink throughput.
(0) - Drop unknown unicast packets.
(1) - Forward unknown unicast pa… | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.214 |
| berModSelect The modulation the AP generates BER at. 0 for QPSK, 1 for 16-QAM, 2 for 64-QAM, and 3 for 256-QAM. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.215 |
| remoteSpectrumAnalyzerScanBandwidth Scanning Bandwidth used for the Remote Spectrum Analyzer. Only available on PMP 450. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.216 |
| multicastVCDataRate Enables and selects the data rate of the Multicast VC.
If disabled, multicast messages are sent using the broadcast VC.
This VC does not automatically rate adapt.
Note: SMs that c… | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.217 |
| dlnkMcastCIR Downlink Multicast CIR (kbps) | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.1.1.218 |
| multicastRetryCount Multicast Repeat Count : Range 0 - 2. For APs. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.1.1.219 |
| asIP3 obsolete Obsoleted. Configure with whispApsDNS.authServer3. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.1.1.22 |
| apConfigAdjacentChanSupport Used to enable or disable adjacent channel support.
This could be needed when there is no guard band between co-located APs.
Only available for APs in 3 GHz, 4.9 GHz and all 5 GHz… | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.220 |
| pmp430InteropMode When the AP talks to a PMP 430 it can do so in either MIMO-A or SISO mode.
0 = MIMO-A
1 = SISO
Only applies to PMP 450 AP at 5 GHz.
By default in 13.2 the AP talks in MIMO-A to P… | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.221 |
| framePeriod Changes frame period to 2.5 ms or 5ms.
Note: If set to 5 ms, only SM/BHS from 13.3 and onward will be able to register.
Only on PMP and PTP 450.
Not available in all regions. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.223 |
| enableRadiusDynAuth This option can be used to enable Radius Dynamic Authorization Extensions.Both CoA, which change the SM config parameters from the Radius server while an SM is already in session … | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.224 |
| pmp430SMRegistration Option to allow/disallow PMP 430 SMs to register to this AP.
When disabled PMP 430 SMs registrations will be rejected. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.225 |
| disableAuthForICCSM Bypass Authentication for ICC SMs | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.226 |
| onlyAllowPMP450iSMRegistration Option to limit SM registration to only allow PMP 450i devices or allow all devices (450i/450/430) to register.
PMP 430 SM registration can be further limited by the pmp430SMRegis… | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.228 |
| pmp450430LegacyMode Option to put the PMP 450b/450i/450m into a Legacy mode for communicating with PMP 450 SMs running SW older than 13.3 and PMP 430 SMs running SW older than 13.4.1.
Enabling this o… | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.229 |
| lanIpAp LAN IP. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.1.1.23 |
| pagerRejectFilterSelect Enable or disable the Pager filter which can filter out Pager signals interfering in the 900 MHz band.
NOTE: Frequencies 920 MHz and above will not work when enabled.
Only applica… | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.230 |
| freeRunGPSSyncBypass Enable to allow Free Run to begin immediately after radio bootup. Normally, Free Run is only allowed
after GPS sync has been established at least once, then lost. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.231 |
| useAPManagementVIDForICCSM When enabled, SM connected via ICC uses APs MVID instead of its own. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.232 |
| frameAlignmentLegacyMode Option to adjust the frame alignment for compatibility with different GPS sync sources and software versions.
Please see user guide for more information.
Not applicable to 3 GHz r… | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.233 |
| noRebootFreqChange Enable/Disable option to change frequency without rebooting.
Engineering use only. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.234 |
| mumimoTrialMode Enable MU-MIMO, Trial Mode units will decrement until units are exhausted or Trial Mode is disabled.
Disable MU-MIMO, radio is still functional with SU-MIMO operation. Trial Mode … | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.236 |
| lanMaskAp LAN subnet mask. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.1.1.24 |
| prioritizeMgmtData 0 - Management data will use low priority VC.
1 - If high priority VC is configured will use that, otherwise will use low priority VC | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.247 |
| defaultGwAp Default gateway | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.1.1.25 |
| privateIp Private IP. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.1.1.26 |
| gpsTrap Variable to enable/disable GPS sync/out-sync traps. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.27 |
| regTrap Variable to enable/disable registration complete/lost traps. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.28 |
| txSpreading Variable to enable/disable Transmit Frame Spreading. This option is for FSK only. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.29 |
| apLinkSpeed obsolete The variable is deprecated. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.1.1.3 |
| apBeaconInfo Variable to enable/disable displaying AP beacon info through AP eval. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.30 |
| authMode Variable to enable/disable authentication. The authentication optional mode
is for APs only. This variable can only be set when authentication feature
is enabled. Setting it to 1… | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.31 |
| authKeyAp Authentication key. It should be 32 character long. Can be used on MultiPoint AP if AP Authentication mode is selected.
Otherwise, it is used on Backhauls. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.1.1.32 |
| encryptionMode Variable to enable/disable encryption. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.33 |
| ntpServerIp obsolete Obsoleted. Configure with whispApsDNS.ntpServer1, whispApsDNS.ntpServer2, and whispApsDNS.ntpServer3. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.1.1.34 |
| broadcastRetryCount Broadcast Repeat Count : Range 0 -- 2. For APs. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.1.1.35 |
| encryptDwBroadcast To enable or disable Encrypted Downlink Broadcast. For FSK APs. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.36 |
| updateAppAddress Update Application Address. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.1.1.37 |
| dfsConfig obsolete To configure proper regions for Dynamic Frequency Shifting. For 5.2/5.4/5.7 GHz radios. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.38 |
| vlanEnable To enable or disable VLAN. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.39 |
| dwnLnkData deprecated This attribute is deprecated. Please see radioDownlinkPercent. | scalar | % Integer32 | .1.3.6.1.4.1.161.19.3.1.1.4 |
| configSource To configure CIR, MIR and VLAN through SM or BAM. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.40 |
| apRateAdapt obsolete To enable or disable double rate. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.41 |
| numCtlSlotsHW deprecated This attribute is deprecated. Please see radioControlSlots. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.1.1.42 |
| displayAPEval If enable, it allows display of AP Eval Data at the SM. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.43 |
| smIsolation (0) -- Disable SM Isolation.
(1) -- Enable SM Isolation by blocking SM destined packets.
(2) -- Enable SM Isolation by forwarding SM packets upstream. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.44 |
| ipAccessFilterEnable To enable or disable IP access filtering to Management functions.
(0) - IP access will be allowed from all addresses.
(1) - IP access will be controlled using allowedIPAccess1-3 e… | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.45 |
| allowedIPAccess1 Allow access to AP Management from this IP.
0 is default setting to allow from all IPs. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.1.1.46 |
| allowedIPAccess2 Allow access to AP Management from this IP.
0 is default setting to allow from all IPs. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.1.1.47 |
| allowedIPAccess3 Allow access to AP Management from this IP.
0 is default setting to allow from all IPs. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.1.1.48 |
| tslBridging 1 = We are performing Translation Bridging 0 = We are not. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.49 |
| highPriorityUpLnkPct obsolete Percentage of uplink slots for high priority data. | scalar | % Integer32 | .1.3.6.1.4.1.161.19.3.1.1.5 |
| untranslatedArp 1 = We are sending untranslated ARP response. 0 = We are not. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.50 |
| limitFreqBand900 1 = We are limiting the freq band of 900 radios. 0 = We are not. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.51 |
| txPwrLevel obsolete Deprecated, use 'transmitterOP' instead. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.1.1.52 |
| rfFreqCaralt1 First DFS Alternate RF Frequency. (Only available for DFS radios) Used
as a backup frequency when Radar is detected on DFS enabled Radios.
The frequencies are:
5.4 rad… | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.53 |
| rfFreqCaralt2 Second DFS Alternate RF Frequency. (Only available for DFS radios) Used
as a backup frequency when Radar is detected on DFS enabled Radios.
The frequencies are:
5.4 ra… | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.54 |
| scheduleWhitening 1 = Schedule Whitening allowed. 0 = Schedule Whitening not allowed. This option is for FSK only | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.55 |
| remoteSpectrumAnalysisDuration Value in seconds for a remote spectrum analysis on an SM. Range is 10-1000 seconds. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.1.1.56 |
| remoteSpectrumAnalyzerLUID Get will always return 0.
Set will start Remote Spectrum Analyzer on specified LUID.
*Warning* This will cause the SM to disconnect from the AP!
You will lose the session for the … | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.1.1.57 |
| bhReReg Allows BHS re-registration every 24 hours. Enable allows re-registration and Disable does not. 24 Hour Encryption Refresh. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.58 |
| dlnkBcastCIR Downlink Broadcast CIR (kbps) | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.1.1.59 |
| numUAckSlots obsolete Total number of upstream ack slots. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.1.1.6 |
| verifyGPSChecksum Enable/Disable verification of GPS message checksums. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.60 |
| apVlanOverride Setting this option will cause an AP to retain its VLAN settings when turning it into an SM. It will be mostly helpful for
running spectrum analysis on the AP. Since doing that … | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.61 |
| dhcpRelayAgentEnable Enable or Disable MultiPoint AP acting as DHCP Relay Agent for all SMs and Clients underneath it.
(0) - Relay Agent disabled - SM/CPE devices will perform DHCP normally
(1) - Rela… | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.62 |
| dhcpRelayAgentSrvrIP obsolete Obsoleted. Configure with whispApsDNS.dhcprServer. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.1.1.63 |
| colorCodeRescanTimer Time in minutes for the subscriber to begin the idle timer. This timer
will begin as soon as a session is started.
This only fires if the device is in session with a non-primary … | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.1.1.64 |
| colorCodeRescanIdleTimer Time in minutes for the subscriber to check for an idle state. If an period has pass where no unicast RF traffic has occured (idle),
then the subscriber will begin to rescan.
Thi… | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.1.1.65 |
| authKeyOptionAP This option is for Multipoint APs only. This option will only be used if Authentication Mode is set
to AP Pre-Shared Key.
0 - Use default key.
1 - Use set key. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.66 |
| asIP4 obsolete Obsoleted. Configure with whispApsDNS.authServer4. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.1.1.67 |
| asIP5 obsolete Obsoleted. Configure with whispApsDNS.authServer5. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.1.1.68 |
| onlyAllowVer95OrAbove Only allow subscribers that are running version 9.5 or above. Any radio that has a version below 9.5 will not be
allowed to register. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.69 |
| uAcksReservHigh obsolete Total number of upstream high priority ack slots | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.1.1.7 |
| apRxDelay This is used for engineering debug and needs to be removed or moved to eng MIB before releasing the MIB. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.1.1.70 |
| qinqEthType EtherType for QinQ (802.1ad) outer tag (S-Tag). 0x88a8 by default. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.71 |
| sMTxPowerControl Enable/Disable AP control of SM TX power.
Engineering use only. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.72 |
| fskSMRcvTargetLvl obsolete Desired SM Receive Level at AP (dBm, Range -40dBm to -80 dBm).
FSK only. | scalar | dBm Integer32 | .1.3.6.1.4.1.161.19.3.1.1.73 |
| authSharedSecret1 Authentication Server 1 Shared Secret. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.1.1.74 |
| authSharedSecret2 Authentication Server 2 Shared Secret. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.1.1.75 |
| authSharedSecret3 Authentication Server 3 Shared Secret. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.1.1.76 |
| whispUsrAuthSharedSecret1 obsolete Obsoleted. Use whispApsConfig.authSharedSecret1. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.1.1.79 |
| numDAckSlots obsolete Total number of downstream ack slots. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.1.1.8 |
| whispUsrAuthSharedSecret2 obsolete Obsoleted. Use whispApsConfig.authSharedSecret2. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.1.1.80 |
| whispUsrAuthSharedSecret3 obsolete Obsoleted. Use whispApsConfig.authSharedSecret3. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.1.1.81 |
| whispUsrAcctSvr1 obsolete Obsoleted. Use whispApsDNS.authServer1. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.1.1.82 |
| whispUsrAcctSvr2 obsolete Obsoleted. Use whispApsDNS.authServer2. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.1.1.83 |
| whispUsrAcctSvr3 obsolete Obsoleted. Use whispApsDNS.authServer3. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.1.1.84 |
| whispUsrAuthPhase1 deprecated Select method for User Authentication. This is deprecated.
Please use whispUsrAuth. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.85 |
| whispWebUseAuthServer obsolete Obsoleted. Use whispApsDNS.authServer[1-3]. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.86 |
| dropSession SM/BHS MAC Address to drop session from the AP/BHM. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.161.19.3.1.1.87 |
| uGPSPower Enable or Disable power supply to Universal GPS module (UGPS capable APs only, when GPS_output_enable is NOT set). | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.88 |
| dAcksReservHigh obsolete Total number of high priority downstream ack slots. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.1.1.9 |
| ofdmSMRcvTargetLvl Desired SM Receive Level at AP (dBm, Range -40dBm to -80 dBm). As of release 12.1, on MIMO systems this is a combined power level value. | scalar | dBm Integer32 | .1.3.6.1.4.1.161.19.3.1.1.90 |
| radiusPort Port used to connect to the RADIUS server. Default is 1812. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.1.1.91 |
| radiusAcctPort Port used to for RADIUS Accounting. Default is 1813. | scalar | Integer32 | .1.3.6.1.4.1.161.19.3.1.1.92 |
| lastSesStatsReset Displays the timestamp of last reset of session stats or None otherwise. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.1.1.93 |
| resetSesStats Resets the session stats if true. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.94 |
| rfOLTrap Enable/Disable SNMP Trap for when RF Overload exceeds configured Threshold level. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.95 |
| rfOLThreshold Percent of packet overload in the RF Downlink where SNMP is generated and sent to Network Manager. | scalar | % Integer32 | .1.3.6.1.4.1.161.19.3.1.1.96 |
| rfOLEnable Enable/Disable Throughput RF Overload Monitoring monitoring. | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.97 |
| actionListFilename Name of the file that contains the Action List for Auto update commands from CNUT | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.1.1.98 |
| enableAutoupdate Enables/Disables auto-update of the SM's under an AP | scalar | Enumeration | .1.3.6.1.4.1.161.19.3.1.1.99 |