removeIdleSMs

WHISP-APS-MIB · .1.3.6.1.4.1.161.19.3.1.1.108
MIB view Table view

Object

scalar r/w Enumeration 
Setting this to a value 1 will remove all SMs which are in Idle state from AP's Session list.

Context

MIB
WHISP-APS-MIB
OID
.1.3.6.1.4.1.161.19.3.1.1.108
Type
scalar
Access
readwrite
Status
current
Parent
whispApsConfig
Siblings
139

Syntax

Enumeration

Values & Constraints

Enumerated Values
0stopped
1start

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
gpsInput obsolete
The variable is deprecated. See gpsInput in whispBoxConfig.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.1
numCtlSlots obsolete
This OID is deprecated, please use numCtlSlotsHW.
scalarInteger32.1.3.6.1.4.1.161.19.3.1.1.10
accountingSmReAuthInterval
Select Interval for Reauthentication of SM
scalarInteger32.1.3.6.1.4.1.161.19.3.1.1.100
syslogDomainNameAppend deprecated
This attribute is deprecated. Use syslogDomainNameAppend in whispBoxAttributesGroup
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.101
syslogServerAddr deprecated
This attribute is deprecated. Use syslogServerAddr in whispBoxAttributesGroup
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.1.1.102
syslogServerPort
This attribute is deprecated. Use syslogServerPort in whispBoxAttributesGroup
scalarInteger32.1.3.6.1.4.1.161.19.3.1.1.103
syslogXmitAP
Enables/Disables transmission of Syslogs from AP/BHM
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.104
syslogXmitSMs
Enables/Disables transmission of Syslogs from connected SMs/BHS. This can be over-ridden by the setting on individual SMs/ the BHS.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.105
accountingInterimUpdateInterval
Select Interval for Interim Updates
scalarInteger32.1.3.6.1.4.1.161.19.3.1.1.106
gpsOutputEn
Enable or Disable GPS sync output enable.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.107
lastTimeIdleSMsRemoved
Displays the timestamp of last removal of Idle SMs from AP's Session list
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.1.1.109
numCtlSlotsReserveHigh obsolete
Total number of High priority upstream control (contention) slots.
scalarInteger32.1.3.6.1.4.1.161.19.3.1.1.11
userAuthSharedSecret1
User Authentication Server 1 Shared Secret.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.1.1.110
userAuthSharedSecret2
User Authentication Server 2 Shared Secret.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.1.1.111
userAuthSharedSecret3
User Authentication Server 3 Shared Secret.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.1.1.112
trapDelayAfterBootup
Delays sending of SNMP traps after radio boots up for this many number of seconds.
scalarseconds Integer32.1.3.6.1.4.1.161.19.3.1.1.113
upLnkDataRate
Sustained uplink bandwidth cap.
scalarKilobits/sec Integer32.1.3.6.1.4.1.161.19.3.1.1.12
upLnkLimit
Burst uplink bandwidth cap.
scalarKilobits/sec Integer32.1.3.6.1.4.1.161.19.3.1.1.13
dwnLnkDataRate
Sustained downlink bandwidth cap.
scalarKilobits/sec Integer32.1.3.6.1.4.1.161.19.3.1.1.14
dwnLnkLimit
Burst downlink bandwidth cap.
scalarKilobits/sec Integer32.1.3.6.1.4.1.161.19.3.1.1.15
sectorID
Advertise sector number for an AP. Not supported on 450 platform.
scalarInteger32.1.3.6.1.4.1.161.19.3.1.1.16
maxRange deprecated
This attribute is deprecated. Please see radioMaxRange.
scalarmiles Integer32.1.3.6.1.4.1.161.19.3.1.1.17
airLinkSecurity obsolete
Air Link Security. desEnhancedAndAuthentication(2) and authenticationIfAvailable(3) are only for APAS.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.18
berMode obsolete
AP backgroup BER mode.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.19
rfFreqCarrier deprecated
The primary transmit frequency. Also see radioFreqCarrier.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.2
asIP1 obsolete
Obsoleted. Configure with whispApsDNS.authServer1.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.1.1.20
radioMode obsolete
This OID is obsolete.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.206
rfTelnetAccess
Allows/prohibits uplink Telnet access (SM->AP).
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.207
upLnkMaxBurstDataRate
Maximum burst uplink rate.
scalarKilobits/sec Integer32.1.3.6.1.4.1.161.19.3.1.1.208
dwnLnkMaxBurstDataRate
Maximum burst downlink rate.
scalarKilobits/sec Integer32.1.3.6.1.4.1.161.19.3.1.1.209
asIP2 obsolete
Obsoleted. Configure with whispApsDNS.authServer2.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.1.1.21
rfPPPoEPADIForwarding
Enables/disables forwarding of PPPoE PADI packets from AP to SM.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.210
allowedIPAccessNMLength1
Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed
scalarInteger32.1.3.6.1.4.1.161.19.3.1.1.211
allowedIPAccessNMLength2
Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed
scalarInteger32.1.3.6.1.4.1.161.19.3.1.1.212
allowedIPAccessNMLength3
Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed
scalarInteger32.1.3.6.1.4.1.161.19.3.1.1.213
bridgeFloodUnknownsEnable
Forward unicast packets with an unknown address to all SMs. This can significantly reduce downlink throughput. (0) - Drop unknown unicast packets. (1) - Forward unknown unicast pa…
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.214
berModSelect
The modulation the AP generates BER at. 0 for QPSK, 1 for 16-QAM, 2 for 64-QAM, and 3 for 256-QAM.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.215
remoteSpectrumAnalyzerScanBandwidth
Scanning Bandwidth used for the Remote Spectrum Analyzer. Only available on PMP 450.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.216
multicastVCDataRate
Enables and selects the data rate of the Multicast VC. If disabled, multicast messages are sent using the broadcast VC. This VC does not automatically rate adapt. Note: SMs that c…
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.217
dlnkMcastCIR
Downlink Multicast CIR (kbps)
scalarInteger32.1.3.6.1.4.1.161.19.3.1.1.218
multicastRetryCount
Multicast Repeat Count : Range 0 - 2. For APs.
scalarInteger32.1.3.6.1.4.1.161.19.3.1.1.219
asIP3 obsolete
Obsoleted. Configure with whispApsDNS.authServer3.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.1.1.22
apConfigAdjacentChanSupport
Used to enable or disable adjacent channel support. This could be needed when there is no guard band between co-located APs. Only available for APs in 3 GHz, 4.9 GHz and all 5 GHz…
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.220
pmp430InteropMode
When the AP talks to a PMP 430 it can do so in either MIMO-A or SISO mode. 0 = MIMO-A 1 = SISO Only applies to PMP 450 AP at 5 GHz. By default in 13.2 the AP talks in MIMO-A to P…
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.221
framePeriod
Changes frame period to 2.5 ms or 5ms. Note: If set to 5 ms, only SM/BHS from 13.3 and onward will be able to register. Only on PMP and PTP 450. Not available in all regions.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.223
enableRadiusDynAuth
This option can be used to enable Radius Dynamic Authorization Extensions.Both CoA, which change the SM config parameters from the Radius server while an SM is already in session …
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.224
pmp430SMRegistration
Option to allow/disallow PMP 430 SMs to register to this AP. When disabled PMP 430 SMs registrations will be rejected.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.225
disableAuthForICCSM
Bypass Authentication for ICC SMs
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.226
onlyAllowPMP450iSMRegistration
Option to limit SM registration to only allow PMP 450i devices or allow all devices (450i/450/430) to register. PMP 430 SM registration can be further limited by the pmp430SMRegis…
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.228
pmp450430LegacyMode
Option to put the PMP 450b/450i/450m into a Legacy mode for communicating with PMP 450 SMs running SW older than 13.3 and PMP 430 SMs running SW older than 13.4.1. Enabling this o…
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.229
lanIpAp
LAN IP.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.1.1.23
pagerRejectFilterSelect
Enable or disable the Pager filter which can filter out Pager signals interfering in the 900 MHz band. NOTE: Frequencies 920 MHz and above will not work when enabled. Only applica…
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.230
freeRunGPSSyncBypass
Enable to allow Free Run to begin immediately after radio bootup. Normally, Free Run is only allowed after GPS sync has been established at least once, then lost.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.231
useAPManagementVIDForICCSM
When enabled, SM connected via ICC uses APs MVID instead of its own.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.232
frameAlignmentLegacyMode
Option to adjust the frame alignment for compatibility with different GPS sync sources and software versions. Please see user guide for more information. Not applicable to 3 GHz r…
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.233
noRebootFreqChange
Enable/Disable option to change frequency without rebooting. Engineering use only.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.234
mumimoTrialMode
Enable MU-MIMO, Trial Mode units will decrement until units are exhausted or Trial Mode is disabled. Disable MU-MIMO, radio is still functional with SU-MIMO operation. Trial Mode …
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.236
lanMaskAp
LAN subnet mask.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.1.1.24
prioritizeMgmtData
0 - Management data will use low priority VC. 1 - If high priority VC is configured will use that, otherwise will use low priority VC
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.247
defaultGwAp
Default gateway
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.1.1.25
privateIp
Private IP.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.1.1.26
gpsTrap
Variable to enable/disable GPS sync/out-sync traps.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.27
regTrap
Variable to enable/disable registration complete/lost traps.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.28
txSpreading
Variable to enable/disable Transmit Frame Spreading. This option is for FSK only.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.29
apLinkSpeed obsolete
The variable is deprecated.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.1.1.3
apBeaconInfo
Variable to enable/disable displaying AP beacon info through AP eval.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.30
authMode
Variable to enable/disable authentication. The authentication optional mode is for APs only. This variable can only be set when authentication feature is enabled. Setting it to 1…
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.31
authKeyAp
Authentication key. It should be 32 character long. Can be used on MultiPoint AP if AP Authentication mode is selected. Otherwise, it is used on Backhauls.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.1.1.32
encryptionMode
Variable to enable/disable encryption.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.33
ntpServerIp obsolete
Obsoleted. Configure with whispApsDNS.ntpServer1, whispApsDNS.ntpServer2, and whispApsDNS.ntpServer3.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.1.1.34
broadcastRetryCount
Broadcast Repeat Count : Range 0 -- 2. For APs.
scalarInteger32.1.3.6.1.4.1.161.19.3.1.1.35
encryptDwBroadcast
To enable or disable Encrypted Downlink Broadcast. For FSK APs.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.36
updateAppAddress
Update Application Address.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.1.1.37
dfsConfig obsolete
To configure proper regions for Dynamic Frequency Shifting. For 5.2/5.4/5.7 GHz radios.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.38
vlanEnable
To enable or disable VLAN.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.39
dwnLnkData deprecated
This attribute is deprecated. Please see radioDownlinkPercent.
scalar% Integer32.1.3.6.1.4.1.161.19.3.1.1.4
configSource
To configure CIR, MIR and VLAN through SM or BAM.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.40
apRateAdapt obsolete
To enable or disable double rate.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.41
numCtlSlotsHW deprecated
This attribute is deprecated. Please see radioControlSlots.
scalarInteger32.1.3.6.1.4.1.161.19.3.1.1.42
displayAPEval
If enable, it allows display of AP Eval Data at the SM.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.43
smIsolation
(0) -- Disable SM Isolation. (1) -- Enable SM Isolation by blocking SM destined packets. (2) -- Enable SM Isolation by forwarding SM packets upstream.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.44
ipAccessFilterEnable
To enable or disable IP access filtering to Management functions. (0) - IP access will be allowed from all addresses. (1) - IP access will be controlled using allowedIPAccess1-3 e…
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.45
allowedIPAccess1
Allow access to AP Management from this IP. 0 is default setting to allow from all IPs.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.1.1.46
allowedIPAccess2
Allow access to AP Management from this IP. 0 is default setting to allow from all IPs.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.1.1.47
allowedIPAccess3
Allow access to AP Management from this IP. 0 is default setting to allow from all IPs.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.1.1.48
tslBridging
1 = We are performing Translation Bridging 0 = We are not.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.49
highPriorityUpLnkPct obsolete
Percentage of uplink slots for high priority data.
scalar% Integer32.1.3.6.1.4.1.161.19.3.1.1.5
untranslatedArp
1 = We are sending untranslated ARP response. 0 = We are not.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.50
limitFreqBand900
1 = We are limiting the freq band of 900 radios. 0 = We are not.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.51
txPwrLevel obsolete
Deprecated, use 'transmitterOP' instead.
scalarInteger32.1.3.6.1.4.1.161.19.3.1.1.52
rfFreqCaralt1
First DFS Alternate RF Frequency. (Only available for DFS radios) Used as a backup frequency when Radar is detected on DFS enabled Radios. The frequencies are: 5.4 rad…
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.53
rfFreqCaralt2
Second DFS Alternate RF Frequency. (Only available for DFS radios) Used as a backup frequency when Radar is detected on DFS enabled Radios. The frequencies are: 5.4 ra…
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.54
scheduleWhitening
1 = Schedule Whitening allowed. 0 = Schedule Whitening not allowed. This option is for FSK only
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.55
remoteSpectrumAnalysisDuration
Value in seconds for a remote spectrum analysis on an SM. Range is 10-1000 seconds.
scalarInteger32.1.3.6.1.4.1.161.19.3.1.1.56
remoteSpectrumAnalyzerLUID
Get will always return 0. Set will start Remote Spectrum Analyzer on specified LUID. *Warning* This will cause the SM to disconnect from the AP! You will lose the session for the …
scalarInteger32.1.3.6.1.4.1.161.19.3.1.1.57
bhReReg
Allows BHS re-registration every 24 hours. Enable allows re-registration and Disable does not. 24 Hour Encryption Refresh.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.58
dlnkBcastCIR
Downlink Broadcast CIR (kbps)
scalarInteger32.1.3.6.1.4.1.161.19.3.1.1.59
numUAckSlots obsolete
Total number of upstream ack slots.
scalarInteger32.1.3.6.1.4.1.161.19.3.1.1.6
verifyGPSChecksum
Enable/Disable verification of GPS message checksums.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.60
apVlanOverride
Setting this option will cause an AP to retain its VLAN settings when turning it into an SM. It will be mostly helpful for running spectrum analysis on the AP. Since doing that …
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.61
dhcpRelayAgentEnable
Enable or Disable MultiPoint AP acting as DHCP Relay Agent for all SMs and Clients underneath it. (0) - Relay Agent disabled - SM/CPE devices will perform DHCP normally (1) - Rela…
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.62
dhcpRelayAgentSrvrIP obsolete
Obsoleted. Configure with whispApsDNS.dhcprServer.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.1.1.63
colorCodeRescanTimer
Time in minutes for the subscriber to begin the idle timer. This timer will begin as soon as a session is started. This only fires if the device is in session with a non-primary …
scalarInteger32.1.3.6.1.4.1.161.19.3.1.1.64
colorCodeRescanIdleTimer
Time in minutes for the subscriber to check for an idle state. If an period has pass where no unicast RF traffic has occured (idle), then the subscriber will begin to rescan. Thi…
scalarInteger32.1.3.6.1.4.1.161.19.3.1.1.65
authKeyOptionAP
This option is for Multipoint APs only. This option will only be used if Authentication Mode is set to AP Pre-Shared Key. 0 - Use default key. 1 - Use set key.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.66
asIP4 obsolete
Obsoleted. Configure with whispApsDNS.authServer4.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.1.1.67
asIP5 obsolete
Obsoleted. Configure with whispApsDNS.authServer5.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.1.1.68
onlyAllowVer95OrAbove
Only allow subscribers that are running version 9.5 or above. Any radio that has a version below 9.5 will not be allowed to register.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.69
uAcksReservHigh obsolete
Total number of upstream high priority ack slots
scalarInteger32.1.3.6.1.4.1.161.19.3.1.1.7
apRxDelay
This is used for engineering debug and needs to be removed or moved to eng MIB before releasing the MIB.
scalarInteger32.1.3.6.1.4.1.161.19.3.1.1.70
qinqEthType
EtherType for QinQ (802.1ad) outer tag (S-Tag). 0x88a8 by default.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.71
sMTxPowerControl
Enable/Disable AP control of SM TX power. Engineering use only.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.72
fskSMRcvTargetLvl obsolete
Desired SM Receive Level at AP (dBm, Range -40dBm to -80 dBm). FSK only.
scalardBm Integer32.1.3.6.1.4.1.161.19.3.1.1.73
authSharedSecret1
Authentication Server 1 Shared Secret.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.1.1.74
authSharedSecret2
Authentication Server 2 Shared Secret.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.1.1.75
authSharedSecret3
Authentication Server 3 Shared Secret.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.1.1.76
whispUsrAuthSharedSecret1 obsolete
Obsoleted. Use whispApsConfig.authSharedSecret1.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.1.1.79
numDAckSlots obsolete
Total number of downstream ack slots.
scalarInteger32.1.3.6.1.4.1.161.19.3.1.1.8
whispUsrAuthSharedSecret2 obsolete
Obsoleted. Use whispApsConfig.authSharedSecret2.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.1.1.80
whispUsrAuthSharedSecret3 obsolete
Obsoleted. Use whispApsConfig.authSharedSecret3.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.1.1.81
whispUsrAcctSvr1 obsolete
Obsoleted. Use whispApsDNS.authServer1.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.1.1.82
whispUsrAcctSvr2 obsolete
Obsoleted. Use whispApsDNS.authServer2.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.1.1.83
whispUsrAcctSvr3 obsolete
Obsoleted. Use whispApsDNS.authServer3.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.1.1.84
whispUsrAuthPhase1 deprecated
Select method for User Authentication. This is deprecated. Please use whispUsrAuth.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.85
whispWebUseAuthServer obsolete
Obsoleted. Use whispApsDNS.authServer[1-3].
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.86
dropSession
SM/BHS MAC Address to drop session from the AP/BHM.
scalarSNMPv2-TCMacAddress.1.3.6.1.4.1.161.19.3.1.1.87
uGPSPower
Enable or Disable power supply to Universal GPS module (UGPS capable APs only, when GPS_output_enable is NOT set).
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.88
timeZone
Set the timezone offset for the radio. This change takes affect dynamically. The available timezones are: 0 : (UTC) UTC - Coordinated Universal Time 1 : (UTC) GMT - Greenwich M…
scalarInteger32.1.3.6.1.4.1.161.19.3.1.1.89
dAcksReservHigh obsolete
Total number of high priority downstream ack slots.
scalarInteger32.1.3.6.1.4.1.161.19.3.1.1.9
ofdmSMRcvTargetLvl
Desired SM Receive Level at AP (dBm, Range -40dBm to -80 dBm). As of release 12.1, on MIMO systems this is a combined power level value.
scalardBm Integer32.1.3.6.1.4.1.161.19.3.1.1.90
radiusPort
Port used to connect to the RADIUS server. Default is 1812.
scalarInteger32.1.3.6.1.4.1.161.19.3.1.1.91
radiusAcctPort
Port used to for RADIUS Accounting. Default is 1813.
scalarInteger32.1.3.6.1.4.1.161.19.3.1.1.92
lastSesStatsReset
Displays the timestamp of last reset of session stats or None otherwise.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.1.1.93
resetSesStats
Resets the session stats if true.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.94
rfOLTrap
Enable/Disable SNMP Trap for when RF Overload exceeds configured Threshold level.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.95
rfOLThreshold
Percent of packet overload in the RF Downlink where SNMP is generated and sent to Network Manager.
scalar% Integer32.1.3.6.1.4.1.161.19.3.1.1.96
rfOLEnable
Enable/Disable Throughput RF Overload Monitoring monitoring.
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.97
actionListFilename
Name of the file that contains the Action List for Auto update commands from CNUT
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.1.1.98
enableAutoupdate
Enables/Disables auto-update of the SM's under an AP
scalarEnumeration.1.3.6.1.4.1.161.19.3.1.1.99