linkOperStatus
WHISP-APS-MIB ·
.1.3.6.1.4.1.161.19.3.1.4.1.6
Object
column
obsolete
Enumeration
This variable is not used.
Context
- MIB
- WHISP-APS-MIB
- OID
.1.3.6.1.4.1.161.19.3.1.4.1.6- Type
- column
- Access
- readonly
- Status
- obsolete
- Parent
- whispLinkEntry
- Table
- whispLinkTable
- Siblings
- 94
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | up |
2 | down |
3 | testing |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| linkLUID LUID number. | column | Integer32 | .1.3.6.1.4.1.161.19.3.1.4.1.1 |
| linkInDiscards The number of inbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being deliverable to a
higher-layer protocol. One possibl… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.1.4.1.10 |
| linkInError The number of inbound packets that contained
errors preventing them from being deliverable to a
higher-layer protocol. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.1.4.1.11 |
| linkInUnknownProtos The number of packets received via the interface
which were discarded because of an unknown or
unsupported protocol. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.1.4.1.12 |
| linkOutOctets The total number of octets transmitted out of the
interface, including framing characters. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.1.4.1.13 |
| linkOutUcastPkts The total number of packets that higher-level
protocols requested be transmitted to a
subnetwork-unicast address, including those that
were discarded or not sent. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.1.4.1.14 |
| linkOutNUcastPkts The total number of packets that higher-level
protocols requested be transmitted to a non-
unicast (i.e., a subnetwork-broadcast or
subnetwork-multicast) address, including those
… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.1.4.1.15 |
| linkOutDiscards The number of outbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being transmitted. One
possible reason for discarding su… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.1.4.1.16 |
| linkOutError The number of outbound packets that could not be
transmitted because of errors. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.1.4.1.17 |
| linkOutQLen Number of packets in output packet queue. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.161.19.3.1.4.1.18 |
| linkSessState Current operational state of an interface.
0 = Idle
1 = In Session
2 = Clearing
3 = Re-registration downlink reset
4 = Authentication Challenge
5 = Registering
6 = Not in use | column | Enumeration | .1.3.6.1.4.1.161.19.3.1.4.1.19 |
| linkDescr A textual string containing information about the
unit. This string should include the name of
the manufacturer, the product name and the version
of the hardware interface. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.1.4.1.2 |
| linkESN Link Electronic serial number. It is MAC address. | column | SNMPv2-TCPhysAddress | .1.3.6.1.4.1.161.19.3.1.4.1.20 |
| linkRSSI The average RSSI reading of all packets received from an SM. Applicable to FSK radios only. | column | Integer32 | .1.3.6.1.4.1.161.19.3.1.4.1.21 |
| linkAveJitter The average Jitter reading of all packets received from an SM. Applicable to FSK radios only. | column | Unsigned32 | .1.3.6.1.4.1.161.19.3.1.4.1.22 |
| linkLastJitter Last jitter value. Applicable to FSK radios only. | column | Unsigned32 | .1.3.6.1.4.1.161.19.3.1.4.1.23 |
| linkAirDelay The current round trip air delay in bits measured between the AP and SM. | column | Integer32 | .1.3.6.1.4.1.161.19.3.1.4.1.24 |
| linkRegCount The number of times an SM has registered to an AP. | column | Integer32 | .1.3.6.1.4.1.161.19.3.1.4.1.25 |
| linkReRegCount The number of times an SM has tried to register with the AP while it still has
an active session with the AP. | column | Integer32 | .1.3.6.1.4.1.161.19.3.1.4.1.26 |
| linkTimeOut Link time out. | column | Integer32 | .1.3.6.1.4.1.161.19.3.1.4.1.27 |
| linkLastRSSI The last RSSI reading of all packets received from an SM. Applicable to FSK radios only. | column | Integer32 | .1.3.6.1.4.1.161.19.3.1.4.1.28 |
| sessionCount How many times has this mac been in/out of session. | column | Integer32 | .1.3.6.1.4.1.161.19.3.1.4.1.29 |
| linkPhysAddress Physical Address of the unit. | column | SNMPv2-TCPhysAddress | .1.3.6.1.4.1.161.19.3.1.4.1.3 |
| softwareVersion The software version of registered SM. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.1.4.1.30 |
| softwareBootVersion The software boot version of registered SM. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.1.4.1.31 |
| fpgaVersion The FPGA version of registered SM. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.1.4.1.32 |
| linkSiteName The site name of the registered SM. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.1.4.1.33 |
| avgPowerLevel The average power level of registered SM.
For systems that support power control, this value can read 'NA' when the AP adjusts the transmit power of a SM
until new packets are rec… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.1.4.1.34 |
| lastPowerLevel The last power level of registered SM.
For MIMO radios this is the combined receive power. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.1.4.1.35 |
| sesDownLinkRate Down link rate. | column | Integer32 | .1.3.6.1.4.1.161.19.3.1.4.1.36 |
| sesDownLinkLimit Down link limit. | column | Integer32 | .1.3.6.1.4.1.161.19.3.1.4.1.37 |
| sesUpLinkRate Uplink rate. | column | Integer32 | .1.3.6.1.4.1.161.19.3.1.4.1.38 |
| sesUpLinkLimit Uplink limit. | column | Integer32 | .1.3.6.1.4.1.161.19.3.1.4.1.39 |
| linkMtu The size of the largest datagram which can be
sent/received on the interface, specified in
octets. For interfaces that are used for
transmitting network datagrams, this is the si… | column | Integer32 | .1.3.6.1.4.1.161.19.3.1.4.1.4 |
| adaptRate Adapt rate of registered SM. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.1.4.1.40 |
| sesLoUpCIR Low priority up link CIR. | column | Integer32 | .1.3.6.1.4.1.161.19.3.1.4.1.41 |
| sesLoDownCIR Low priority down link CIR. | column | Integer32 | .1.3.6.1.4.1.161.19.3.1.4.1.42 |
| sesHiUpCIR High priority up link CIR. | column | Integer32 | .1.3.6.1.4.1.161.19.3.1.4.1.43 |
| sesHiDownCIR High priority down link CIR. | column | Integer32 | .1.3.6.1.4.1.161.19.3.1.4.1.44 |
| platformVer Platform Version. | column | Integer32 | .1.3.6.1.4.1.161.19.3.1.4.1.45 |
| smSessionTmr SM session uptime | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.161.19.3.1.4.1.46 |
| smSessionSeqNumMismatch The count of how many sequence number mismatch between the AP/BHM and the SM/BHS during the authentication
challenge and authentication response messages. This status is only val… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.1.4.1.47 |
| dataVCNum The normal priority Data VC number in use for this link. | column | Integer32 | .1.3.6.1.4.1.161.19.3.1.4.1.48 |
| hiPriQEn Returns whether High Priority channel is enabled. On P7/P8 devices will return 0 always. Use p7p8HiPriQEn OID for P7/P8 radios. | column | Enumeration | .1.3.6.1.4.1.161.19.3.1.4.1.49 |
| linkSpeed An estimate of the interface's current bandwidth
in bits per second. For interfaces which do not
vary in bandwidth or for those where no accurate
estimation can be made, this obj… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.161.19.3.1.4.1.5 |
| dataVCNumHiQ The high priority Data VC number in use for this link, if any. If 0, no High Priority channel is in place. | column | Integer32 | .1.3.6.1.4.1.161.19.3.1.4.1.50 |
| linkInOctetsHiQ The total number of octets received on High Priority Queue, including framing characters. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.1.4.1.51 |
| linkInUcastPktsHiQ The number of subnetwork-unicast packets on High Priority Queue
delivered to a higher-layer protocol. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.1.4.1.52 |
| linkInNUcastPktsHiQ The number of non-unicast (i.e., subnetwork-
broadcast or subnetwork-multicast) packets on High Priority Queue
delivered to a higher-layer protocol. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.1.4.1.53 |
| linkInDiscardsHiQ The number of inbound packets on High Priority Queue which were chosen
to be discarded even though no errors had been
detected to prevent their being deliverable to a
higher-layer… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.1.4.1.54 |
| linkInErrorHiQ The number of inbound packets on High Priority Queue that contained
errors preventing them from being deliverable to a
higher-layer protocol. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.1.4.1.55 |
| linkInUnknownProtosHiQ The number of packets received on High Priority Queue via the interface
which were discarded because of an unknown or
unsupported protocol. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.1.4.1.56 |
| linkOutOctetsHiQ The total number of octets on High Priority Queue transmitted out of the
interface, including framing characters. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.1.4.1.57 |
| linkOutUcastPktsHiQ The total number of packets on High Priority Queue that higher-level
protocols requested be transmitted to a
subnetwork-unicast address, including those that
were discarded or not… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.1.4.1.58 |
| linkOutNUcastPktsHiQ The total number of packets on High Priority Queue that higher-level
protocols requested be transmitted to a non-
unicast (i.e., a subnetwork-broadcast or
subnetwork-multicast) ad… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.1.4.1.59 |
| linkOutDiscardsHiQ The number of outbound packets on High Priority Queue which were chosen
to be discarded even though no errors had been
detected to prevent their being transmitted. One
possible r… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.1.4.1.60 |
| linkOutErrorHiQ The number of outbound packets on High Priority Queue that could not be
transmitted because of errors. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.1.4.1.61 |
| vcQOverflow The number of packets dropped due to Queue overflow on VC. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.1.4.1.62 |
| vcQOverflowHiQ The number of packets dropped due to Queue overflow on High Priority VC, if enabled. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.1.4.1.63 |
| p7p8HiPriQEn Returns whether P7/P8 hi priority channel is enabled. On non-P7/P8 devices will return 0 always. | column | Enumeration | .1.3.6.1.4.1.161.19.3.1.4.1.64 |
| p7p8HiPriQ Hi Priority Queue statistics for P7 or P8 radios, if enabled. If not enabled, or not a P7 or P8, will return 0. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.1.4.1.65 |
| linkAirDelayns The current round trip air delay in nanoseconds measured between the AP and SM. | column | Integer32 | .1.3.6.1.4.1.161.19.3.1.4.1.66 |
| linkQualityAPData Engineering use only.
The current link quality of the SM's data from the AP.
This is relative to the current modulation rate (1X, 2X, 3X, etc). | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.1.4.1.67 |
| linkManagementIP Management IP Address of the unit. 0 indicates SM is not publically addressable. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.1.4.1.69 |
| linkInOctets The total number of octets received on the
interface, including framing characters. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.1.4.1.7 |
| linkFragmentsReceived1XVertical Engineering use only.
Number of fragments received in 1x (QPSK) modulation.
For GenII OFDM and forward.
For MIMO this is the vertical path. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.1.4.1.70 |
| linkFragmentsReceived2XVertical Engineering use only.
Number of fragments received in 2x (16-QAM) modulation.
For GenII OFDM and forward.
For MIMO this is the vertical path. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.1.4.1.71 |
| linkFragmentsReceived3XVertical Engineering use only.
Number of fragments received in 3x (64-QAM) modulation.
For GenII OFDM and forward.
For MIMO this is the vertical path. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.1.4.1.72 |
| linkFragmentsReceived4XVertical Engineering use only.
Number of fragments received in 4x (256-QAM) modulation.
For GenII OFDM and forward.
For MIMO this is the vertical path. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.1.4.1.73 |
| signalToNoiseRatioVertical Estimate of the receive signal to noise ratio in dB.
For GenII OFDM and forward.
For MIMO this is the vertical path. | column | Integer32 | .1.3.6.1.4.1.161.19.3.1.4.1.74 |
| radiusReplyMsg The RADIUS Reply-Msg populated for the SM.
This is only valid when using a backen AAA server. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.1.4.1.75 |
| autoUpdateStatus status of the auto update process | column | Integer32 | .1.3.6.1.4.1.161.19.3.1.4.1.76 |
| radiusFramedIPAddress This Attribute indicates the IP address to be configured for the SM management interface. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.1.4.1.77 |
| radiusFramedIPNetmask This Attribute indicates the netmask to be configured for the SM management interface. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.1.4.1.78 |
| radiusDefaultGateway This Attribute indicates the default gateway to be configured for the SM management interface. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.161.19.3.1.4.1.79 |
| linkInUcastPkts The number of subnetwork-unicast packets
delivered to a higher-layer protocol. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.1.4.1.8 |
| linkFragmentsReceived1XHorizontal Engineering use only.
Number of fragments received in 1x (QPSK) modulation.
For MIMO only.
For MIMO this is the horizontal path.
If operating in MIMO-A this will return 0. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.1.4.1.80 |
| linkFragmentsReceived2XHorizontal Engineering use only.
Number of fragments received in 2x (16-QAM) modulation.
For MIMO only.
For MIMO this is the horizontal path.
If operating in MIMO-A this will return 0. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.1.4.1.81 |
| linkFragmentsReceived3XHorizontal Engineering use only.
Number of fragments received in 3x (64-QAM) modulation.
For MIMO only.
For MIMO this is the horizontal path.
If operating in MIMO-A this will return 0. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.1.4.1.82 |
| linkFragmentsReceived4XHorizontal Engineering use only.
Number of fragments received in 4x (256-QAM) modulation.
For MIMO only.
For MIMO this is the horizontal path.
If operating in MIMO-A this will return 0. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.1.4.1.83 |
| signalToNoiseRatioHorizontal Estimate of the receive signal to noise ratio in dB.
MIMO radios only.
For MIMO this is the horizontal path.
If operating in MIMO-A this will return 0. | column | Integer32 | .1.3.6.1.4.1.161.19.3.1.4.1.84 |
| linkSignalStrengthRatio Signal Strength Ratio in dB is the power received by the vertical antenna input (dB) -
power received by the horizontal antenna input (dB).
MIMO radios only. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.1.4.1.86 |
| linkRadioDbmHorizontal Receive power level of the horizontal antenna in dBm.
MIMO radios only. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.1.4.1.87 |
| linkRadioDbmVertical Receive power level of the vertical antenna in dBm.
MIMO radios only. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.1.4.1.88 |
| maxSMTxPwr Returns whether SM is transmitting at its configured max power level. | column | Integer32 | .1.3.6.1.4.1.161.19.3.1.4.1.89 |
| linkInNUcastPkts The number of non-unicast (i.e., subnetwork-
broadcast or subnetwork-multicast) packets
delivered to a higher-layer protocol. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.161.19.3.1.4.1.9 |
| productType Returns which type of product the SM/BHS is.
450 platform only. | column | Enumeration | .1.3.6.1.4.1.161.19.3.1.4.1.90 |
| linkAdaptRateLowPri The current transmitting rate of the low priority VC.
0 : SM is not in session
1 : 1X QPSK SISO
2 : 2X 16-QAM SISO or QPSK MIMO
3 : 3X 64-QAM SISO
4 : 4X 256-QAM SISO or 16-QAM MI… | column | Enumeration | .1.3.6.1.4.1.161.19.3.1.4.1.91 |
| linkAdaptRateHighPri The current transmitting rate of the high priority VC.
-1 : High Priority Channel not configured
0 : SM is not in session
1 : 1X QPSK SISO
2 : 2X 16-QAM SISO or QPSK MIMO
3 : 3X 6… | column | Enumeration | .1.3.6.1.4.1.161.19.3.1.4.1.92 |
| avgPowerLevelInt The average power level of registered SM as Integer.
For systems that support power control, this value can read '0' when the AP adjusts the transmit power of a SM
until new packe… | column | Integer32 | .1.3.6.1.4.1.161.19.3.1.4.1.93 |
| mimoPowerLevelVertical For MIMO radios, the Vertical power level of registered SM as Integer.
The Vertical Power (+45) level in case of 2.4GHz Dual slant MIMO | column | Integer32 | .1.3.6.1.4.1.161.19.3.1.4.1.94 |
| mimoPowerLevelHorizontal For MIMO radios, the Horizontal power level of registered SM as Integer.
The Horizontal Power(-45) level in case of 2.4GHz Dual slant MIMO | column | Integer32 | .1.3.6.1.4.1.161.19.3.1.4.1.95 |
| linkSwVersion The swversion of registered SM, to be used internally. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.161.19.3.1.4.1.96 |
| spatialFrequency The spatial frequency of registered SM.
Spatial Frequency is the phase advance of the wavefront from one antenna column
to the next caused by the angle at which the wavefront impi… | column | Integer32 | .1.3.6.1.4.1.161.19.3.1.4.1.97 |