avgPowerLevel

WHISP-APS-MIB · .1.3.6.1.4.1.161.19.3.1.4.1.34
MIB view Table view

Object

column SNMPv2-TCDisplayString 
The average power level of registered SM.
For systems that support power control, this value can read 'NA' when the AP adjusts the transmit power of a SM
until new packets are received from the SM with it transmitting at its new power level.
For MIMO this is the combined receive power.

Context

MIB
WHISP-APS-MIB
OID
.1.3.6.1.4.1.161.19.3.1.4.1.34
Type
column
Access
readonly
Status
current
Parent
whispLinkEntry
Table
whispLinkTable
Siblings
94

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString

Values & Constraints

Type Constraints
range: 0..255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
linkLUID
LUID number.
columnInteger32.1.3.6.1.4.1.161.19.3.1.4.1.1
linkInDiscards
The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possibl…
columnSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.1.4.1.10
linkInError
The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.1.4.1.11
linkInUnknownProtos
The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.1.4.1.12
linkOutOctets
The total number of octets transmitted out of the interface, including framing characters.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.1.4.1.13
linkOutUcastPkts
The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.1.4.1.14
linkOutNUcastPkts
The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those …
columnSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.1.4.1.15
linkOutDiscards
The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding su…
columnSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.1.4.1.16
linkOutError
The number of outbound packets that could not be transmitted because of errors.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.1.4.1.17
linkOutQLen
Number of packets in output packet queue.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.161.19.3.1.4.1.18
linkSessState
Current operational state of an interface. 0 = Idle 1 = In Session 2 = Clearing 3 = Re-registration downlink reset 4 = Authentication Challenge 5 = Registering 6 = Not in use
columnEnumeration.1.3.6.1.4.1.161.19.3.1.4.1.19
linkDescr
A textual string containing information about the unit. This string should include the name of the manufacturer, the product name and the version of the hardware interface.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.1.4.1.2
linkESN
Link Electronic serial number. It is MAC address.
columnSNMPv2-TCPhysAddress.1.3.6.1.4.1.161.19.3.1.4.1.20
linkRSSI
The average RSSI reading of all packets received from an SM. Applicable to FSK radios only.
columnInteger32.1.3.6.1.4.1.161.19.3.1.4.1.21
linkAveJitter
The average Jitter reading of all packets received from an SM. Applicable to FSK radios only.
columnUnsigned32.1.3.6.1.4.1.161.19.3.1.4.1.22
linkLastJitter
Last jitter value. Applicable to FSK radios only.
columnUnsigned32.1.3.6.1.4.1.161.19.3.1.4.1.23
linkAirDelay
The current round trip air delay in bits measured between the AP and SM.
columnInteger32.1.3.6.1.4.1.161.19.3.1.4.1.24
linkRegCount
The number of times an SM has registered to an AP.
columnInteger32.1.3.6.1.4.1.161.19.3.1.4.1.25
linkReRegCount
The number of times an SM has tried to register with the AP while it still has an active session with the AP.
columnInteger32.1.3.6.1.4.1.161.19.3.1.4.1.26
linkTimeOut
Link time out.
columnInteger32.1.3.6.1.4.1.161.19.3.1.4.1.27
linkLastRSSI
The last RSSI reading of all packets received from an SM. Applicable to FSK radios only.
columnInteger32.1.3.6.1.4.1.161.19.3.1.4.1.28
sessionCount
How many times has this mac been in/out of session.
columnInteger32.1.3.6.1.4.1.161.19.3.1.4.1.29
linkPhysAddress
Physical Address of the unit.
columnSNMPv2-TCPhysAddress.1.3.6.1.4.1.161.19.3.1.4.1.3
softwareVersion
The software version of registered SM.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.1.4.1.30
softwareBootVersion
The software boot version of registered SM.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.1.4.1.31
fpgaVersion
The FPGA version of registered SM.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.1.4.1.32
linkSiteName
The site name of the registered SM.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.1.4.1.33
lastPowerLevel
The last power level of registered SM. For MIMO radios this is the combined receive power.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.1.4.1.35
sesDownLinkRate
Down link rate.
columnInteger32.1.3.6.1.4.1.161.19.3.1.4.1.36
sesDownLinkLimit
Down link limit.
columnInteger32.1.3.6.1.4.1.161.19.3.1.4.1.37
sesUpLinkRate
Uplink rate.
columnInteger32.1.3.6.1.4.1.161.19.3.1.4.1.38
sesUpLinkLimit
Uplink limit.
columnInteger32.1.3.6.1.4.1.161.19.3.1.4.1.39
linkMtu
The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the si…
columnInteger32.1.3.6.1.4.1.161.19.3.1.4.1.4
adaptRate
Adapt rate of registered SM.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.1.4.1.40
sesLoUpCIR
Low priority up link CIR.
columnInteger32.1.3.6.1.4.1.161.19.3.1.4.1.41
sesLoDownCIR
Low priority down link CIR.
columnInteger32.1.3.6.1.4.1.161.19.3.1.4.1.42
sesHiUpCIR
High priority up link CIR.
columnInteger32.1.3.6.1.4.1.161.19.3.1.4.1.43
sesHiDownCIR
High priority down link CIR.
columnInteger32.1.3.6.1.4.1.161.19.3.1.4.1.44
platformVer
Platform Version.
columnInteger32.1.3.6.1.4.1.161.19.3.1.4.1.45
smSessionTmr
SM session uptime
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.161.19.3.1.4.1.46
smSessionSeqNumMismatch
The count of how many sequence number mismatch between the AP/BHM and the SM/BHS during the authentication challenge and authentication response messages. This status is only val…
columnSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.1.4.1.47
dataVCNum
The normal priority Data VC number in use for this link.
columnInteger32.1.3.6.1.4.1.161.19.3.1.4.1.48
hiPriQEn
Returns whether High Priority channel is enabled. On P7/P8 devices will return 0 always. Use p7p8HiPriQEn OID for P7/P8 radios.
columnEnumeration.1.3.6.1.4.1.161.19.3.1.4.1.49
linkSpeed
An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this obj…
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.161.19.3.1.4.1.5
dataVCNumHiQ
The high priority Data VC number in use for this link, if any. If 0, no High Priority channel is in place.
columnInteger32.1.3.6.1.4.1.161.19.3.1.4.1.50
linkInOctetsHiQ
The total number of octets received on High Priority Queue, including framing characters.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.1.4.1.51
linkInUcastPktsHiQ
The number of subnetwork-unicast packets on High Priority Queue delivered to a higher-layer protocol.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.1.4.1.52
linkInNUcastPktsHiQ
The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets on High Priority Queue delivered to a higher-layer protocol.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.1.4.1.53
linkInDiscardsHiQ
The number of inbound packets on High Priority Queue which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer…
columnSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.1.4.1.54
linkInErrorHiQ
The number of inbound packets on High Priority Queue that contained errors preventing them from being deliverable to a higher-layer protocol.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.1.4.1.55
linkInUnknownProtosHiQ
The number of packets received on High Priority Queue via the interface which were discarded because of an unknown or unsupported protocol.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.1.4.1.56
linkOutOctetsHiQ
The total number of octets on High Priority Queue transmitted out of the interface, including framing characters.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.1.4.1.57
linkOutUcastPktsHiQ
The total number of packets on High Priority Queue that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not…
columnSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.1.4.1.58
linkOutNUcastPktsHiQ
The total number of packets on High Priority Queue that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) ad…
columnSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.1.4.1.59
linkOperStatus obsolete
This variable is not used.
columnEnumeration.1.3.6.1.4.1.161.19.3.1.4.1.6
linkOutDiscardsHiQ
The number of outbound packets on High Priority Queue which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible r…
columnSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.1.4.1.60
linkOutErrorHiQ
The number of outbound packets on High Priority Queue that could not be transmitted because of errors.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.1.4.1.61
vcQOverflow
The number of packets dropped due to Queue overflow on VC.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.1.4.1.62
vcQOverflowHiQ
The number of packets dropped due to Queue overflow on High Priority VC, if enabled.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.1.4.1.63
p7p8HiPriQEn
Returns whether P7/P8 hi priority channel is enabled. On non-P7/P8 devices will return 0 always.
columnEnumeration.1.3.6.1.4.1.161.19.3.1.4.1.64
p7p8HiPriQ
Hi Priority Queue statistics for P7 or P8 radios, if enabled. If not enabled, or not a P7 or P8, will return 0.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.1.4.1.65
linkAirDelayns
The current round trip air delay in nanoseconds measured between the AP and SM.
columnInteger32.1.3.6.1.4.1.161.19.3.1.4.1.66
linkQualityAPData
Engineering use only. The current link quality of the SM's data from the AP. This is relative to the current modulation rate (1X, 2X, 3X, etc).
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.1.4.1.67
linkManagementIP
Management IP Address of the unit. 0 indicates SM is not publically addressable.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.1.4.1.69
linkInOctets
The total number of octets received on the interface, including framing characters.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.1.4.1.7
linkFragmentsReceived1XVertical
Engineering use only. Number of fragments received in 1x (QPSK) modulation. For GenII OFDM and forward. For MIMO this is the vertical path.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.1.4.1.70
linkFragmentsReceived2XVertical
Engineering use only. Number of fragments received in 2x (16-QAM) modulation. For GenII OFDM and forward. For MIMO this is the vertical path.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.1.4.1.71
linkFragmentsReceived3XVertical
Engineering use only. Number of fragments received in 3x (64-QAM) modulation. For GenII OFDM and forward. For MIMO this is the vertical path.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.1.4.1.72
linkFragmentsReceived4XVertical
Engineering use only. Number of fragments received in 4x (256-QAM) modulation. For GenII OFDM and forward. For MIMO this is the vertical path.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.1.4.1.73
signalToNoiseRatioVertical
Estimate of the receive signal to noise ratio in dB. For GenII OFDM and forward. For MIMO this is the vertical path.
columnInteger32.1.3.6.1.4.1.161.19.3.1.4.1.74
radiusReplyMsg
The RADIUS Reply-Msg populated for the SM. This is only valid when using a backen AAA server.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.1.4.1.75
autoUpdateStatus
status of the auto update process
columnInteger32.1.3.6.1.4.1.161.19.3.1.4.1.76
radiusFramedIPAddress
This Attribute indicates the IP address to be configured for the SM management interface.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.1.4.1.77
radiusFramedIPNetmask
This Attribute indicates the netmask to be configured for the SM management interface.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.1.4.1.78
radiusDefaultGateway
This Attribute indicates the default gateway to be configured for the SM management interface.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.1.4.1.79
linkInUcastPkts
The number of subnetwork-unicast packets delivered to a higher-layer protocol.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.1.4.1.8
linkFragmentsReceived1XHorizontal
Engineering use only. Number of fragments received in 1x (QPSK) modulation. For MIMO only. For MIMO this is the horizontal path. If operating in MIMO-A this will return 0.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.1.4.1.80
linkFragmentsReceived2XHorizontal
Engineering use only. Number of fragments received in 2x (16-QAM) modulation. For MIMO only. For MIMO this is the horizontal path. If operating in MIMO-A this will return 0.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.1.4.1.81
linkFragmentsReceived3XHorizontal
Engineering use only. Number of fragments received in 3x (64-QAM) modulation. For MIMO only. For MIMO this is the horizontal path. If operating in MIMO-A this will return 0.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.1.4.1.82
linkFragmentsReceived4XHorizontal
Engineering use only. Number of fragments received in 4x (256-QAM) modulation. For MIMO only. For MIMO this is the horizontal path. If operating in MIMO-A this will return 0.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.1.4.1.83
signalToNoiseRatioHorizontal
Estimate of the receive signal to noise ratio in dB. MIMO radios only. For MIMO this is the horizontal path. If operating in MIMO-A this will return 0.
columnInteger32.1.3.6.1.4.1.161.19.3.1.4.1.84
linkSignalStrengthRatio
Signal Strength Ratio in dB is the power received by the vertical antenna input (dB) - power received by the horizontal antenna input (dB). MIMO radios only.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.1.4.1.86
linkRadioDbmHorizontal
Receive power level of the horizontal antenna in dBm. MIMO radios only.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.1.4.1.87
linkRadioDbmVertical
Receive power level of the vertical antenna in dBm. MIMO radios only.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.1.4.1.88
maxSMTxPwr
Returns whether SM is transmitting at its configured max power level.
columnInteger32.1.3.6.1.4.1.161.19.3.1.4.1.89
linkInNUcastPkts
The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.161.19.3.1.4.1.9
productType
Returns which type of product the SM/BHS is. 450 platform only.
columnEnumeration.1.3.6.1.4.1.161.19.3.1.4.1.90
linkAdaptRateLowPri
The current transmitting rate of the low priority VC. 0 : SM is not in session 1 : 1X QPSK SISO 2 : 2X 16-QAM SISO or QPSK MIMO 3 : 3X 64-QAM SISO 4 : 4X 256-QAM SISO or 16-QAM MI…
columnEnumeration.1.3.6.1.4.1.161.19.3.1.4.1.91
linkAdaptRateHighPri
The current transmitting rate of the high priority VC. -1 : High Priority Channel not configured 0 : SM is not in session 1 : 1X QPSK SISO 2 : 2X 16-QAM SISO or QPSK MIMO 3 : 3X 6…
columnEnumeration.1.3.6.1.4.1.161.19.3.1.4.1.92
avgPowerLevelInt
The average power level of registered SM as Integer. For systems that support power control, this value can read '0' when the AP adjusts the transmit power of a SM until new packe…
columnInteger32.1.3.6.1.4.1.161.19.3.1.4.1.93
mimoPowerLevelVertical
For MIMO radios, the Vertical power level of registered SM as Integer. The Vertical Power (+45) level in case of 2.4GHz Dual slant MIMO
columnInteger32.1.3.6.1.4.1.161.19.3.1.4.1.94
mimoPowerLevelHorizontal
For MIMO radios, the Horizontal power level of registered SM as Integer. The Horizontal Power(-45) level in case of 2.4GHz Dual slant MIMO
columnInteger32.1.3.6.1.4.1.161.19.3.1.4.1.95
linkSwVersion
The swversion of registered SM, to be used internally.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.1.4.1.96
spatialFrequency
The spatial frequency of registered SM. Spatial Frequency is the phase advance of the wavefront from one antenna column to the next caused by the angle at which the wavefront impi…
columnInteger32.1.3.6.1.4.1.161.19.3.1.4.1.97