cfgRstpPortPathCost
WESTERMO-SW6-BRIDGE-MIB ·
.1.3.6.1.4.1.16177.1.400.2.8.1.2.1.1.5
Object
column
r/w
Integer32
The port path cost. The port's contribution, when it is the root
port, to the root path cost for the bridge. By default the cost is
automatically calculated from the port's speed. If -1 is defined,
the port path cost is automatically calculated.
| Data rate | RSTP cost (802.1W-2004, default value) |
|------------|----------------------------------------|
| 4 Mbit/s | 5,000,000 |
| 10 Mbit/s | 2,000,000 |
| 16 Mbit/s | 1,250,000 |
| 100 Mbit/s | 200,000 |
| 1 Gbit/s | 20,000 |
| 2 Gbit/s | 10,000 |
| 10 Gbit/s | 2,000 |
Applies to AP and STA.
Context
- MIB
- WESTERMO-SW6-BRIDGE-MIB
- OID
.1.3.6.1.4.1.16177.1.400.2.8.1.2.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cfgRstpPortTableEntry
- Table
- cfgRstpPortTable
- Siblings
- 5
Syntax
Integer32
Values & Constraints
Object Constraints
range: -1-5000000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cfgRstpPortIndex Entry index of port forward table. | column | Integer32 | .1.3.6.1.4.1.16177.1.400.2.8.1.2.1.1.1 |
| cfgRstpPortEnabled Enable RSTP on port.
Applies to AP and STA. | column | Enumeration | .1.3.6.1.4.1.16177.1.400.2.8.1.2.1.1.2 |
| cfgRstpPortName Port name to apply settings, e.g. eth0 or wlan0.
Applies to AP and STA. | column | OctetString | .1.3.6.1.4.1.16177.1.400.2.8.1.2.1.1.3 |
| cfgRstpPortPriority The port's relative priority value for determining the root port,
in multiples of 16. By default, the port priority is 0x80 (128).
Any value in the lower 4 bits is rounded off. Th… | column | Integer32 | .1.3.6.1.4.1.16177.1.400.2.8.1.2.1.1.4 |
| cfgRstpPortAutoEdge The auto edge port parameter allows the automatic detection of
edge ports.
Ports can be configured as edge ports to facilitate rapid
changes to the forwarding state… | column | Enumeration | .1.3.6.1.4.1.16177.1.400.2.8.1.2.1.1.6 |