wanDialerPersistentReenable

WAN-MIB · .1.3.6.1.4.1.6889.2.1.6.2.5.1.1.5
MIB view Table view

Object

column r/w SNMPv2-SMIInteger32 
The time (in seconds) the dialer is disabled after it exhausts 
its consecutive dial attempts quota (wanDialerPersistentMaxAttempts).
Zero means that the dialer is disabled until the dialing the current
 dial trigger disappears.

Context

MIB
WAN-MIB
OID
.1.3.6.1.4.1.6889.2.1.6.2.5.1.1.5
Type
column
Access
readwrite
Status
current
Parent
wanDialerEntry
Table
wanDialerTable
Siblings
13

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
wanDialerModemIf
The ifIndex of the modem interface
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6889.2.1.6.2.5.1.1.1
wanDialerString4
The 4th dial string in the list(NULL=unconfigured)
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.6889.2.1.6.2.5.1.1.10
wanDialerString5
The 5th dial string in the list(NULL=unconfigured)
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.6889.2.1.6.2.5.1.1.11
wanDialerLastDialed
The last used display string
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.6889.2.1.6.2.5.1.1.12
wanDialerWaitForIpcp
The maximum time (in seconds) the dialer waits from dialing until PPP/IPCP is up.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6889.2.1.6.2.5.1.1.13
wanDialerPersistentInitial
The minimum delay (in seconds) from boot to persitent dialing.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6889.2.1.6.2.5.1.1.14
wanDialerState
The current state of the dialer finit-state-machine
columnEnumeration.1.3.6.1.4.1.6889.2.1.6.2.5.1.1.2
wanDialerPersistentDelay
The number of seconds between persistent dial attempts (zero= no persistent dialing)
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6889.2.1.6.2.5.1.1.3
wanDialerPersistentMaxAttempts
The interval between persistent (non-DDR) dial attempts. Zero means no persistent dialing
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6889.2.1.6.2.5.1.1.4
wanDialerOrder
The dial strings list usage order where: sequential(1) : The dialer starts from the beginning of the list when there is a new reason to dial (dial trigger. roundR…
columnEnumeration.1.3.6.1.4.1.6889.2.1.6.2.5.1.1.6
wanDialerString1
The 1st dial string in the list(NULL=unconfigured)
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.6889.2.1.6.2.5.1.1.7
wanDialerString2
The 2nd dial string in the list(NULL=unconfigured)
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.6889.2.1.6.2.5.1.1.8
wanDialerString3
The 3rd dial string in the list(NULL=unconfigured)
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.6889.2.1.6.2.5.1.1.9