wlanSettingEntry

WAC510 · .1.3.6.1.4.1.4526.100.7.14.2.1.1

Object

row

An entry in the wlanSettingTable. Each wlanSettingEntry represents
a wireless profile (2.4GHz band or 5GHz band). On a single radio
device, the same wireless interface can be assigned 2.4GHz profile 
or 5GHz	profile. On a dual radio device, one of the wireless interfaces
is assigned with 2.4GHz profile and the other wireless interface takes
up 5GHz profile.

Context

MIB: WAC510
OID: .1.3.6.1.4.1.4526.100.7.14.2.1.1
Type: row
Status: current
Parent: wlanSettingTable
Table: wlanSettingTable
Children: 28

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Child Objects

Object	Type	Syntax	OID
wlanIndex Specifies one of the 2 wireless profiles.	column	Enumeration	`.1.3.6.1.4.1.4526.100.7.14.2.1.1.1`
dtimInterval This attribute shall indicate the beacon delivery traffic indication message period in multiples of beaconInterval. The default value is 3.	column	Integer32	`.1.3.6.1.4.1.4526.100.7.14.2.1.1.10`
preambleType This attribute shall indicate the preamble setting. This setting is only applicable to 802.11b, 802.11bg and 802.11ng modes. When set to auto(0), depending on the station type, A…	column	Enumeration	`.1.3.6.1.4.1.4526.100.7.14.2.1.1.11`
txPower This attribute shall indicate the transmit power. The default value is full(0).	column	Enumeration	`.1.3.6.1.4.1.4526.100.7.14.2.1.1.12`
accessControlMode The field indicates whether the access control list is enabled and the source of the database of the access control list.	column	Enumeration	`.1.3.6.1.4.1.4526.100.7.14.2.1.1.13`
mcsRate This attribute shall indicate the transmit rate to be used in case of 11na and 11ng modes. Rate index of 0 means 15 Mbps when the channel width is 40Mhz or dynamic-20/40 and 7.2 …	column	Enumeration	`.1.3.6.1.4.1.4526.100.7.14.2.1.1.15`
guardInterval This attribute shall indicate the guard interval. When set to auto(0), depending on the station type, AP selects 400ns or 800ns guard interval. The default value is auto(0).	column	Enumeration	`.1.3.6.1.4.1.4526.100.7.14.2.1.1.16`
channelWidth This attribute shall set the CWM mode to 20Mhz or 40Mhz or automatically switches between 20 and 40 based on channel conditions. For 11ng mode, the default value is static20Mhz(…	column	Enumeration	`.1.3.6.1.4.1.4526.100.7.14.2.1.1.17`
rifsTransmission This attribute sets the status of rifsTransmission. The default value of the attribute is disable(0).	column	Enumeration	`.1.3.6.1.4.1.4526.100.7.14.2.1.1.20`
apMode Specifies the device operation mode. ap: device operates as an Access Point p2p: device operates as a point-to-point wireless bridge No STA are associated to the device in t…	column	Enumeration	`.1.3.6.1.4.1.4526.100.7.14.2.1.1.21`
uapsdStatus This attribute shall indicate whether wmm power save. The default value is enable(1) .	column	Enumeration	`.1.3.6.1.4.1.4526.100.7.14.2.1.1.22`
maxClientAssociations This attribute shall indicates the max wireless clients that allowed to associated.When the value is set 0,and the wireless clients are not limited	column	Integer32	`.1.3.6.1.4.1.4526.100.7.14.2.1.1.23`
bandSteeringStatus This attribute shall indicate the status of Band Steering. The default value is disable(0).	column	Enumeration	`.1.3.6.1.4.1.4526.100.7.14.2.1.1.26`
bandSteeringRssi24GHz This attribute shall indicate the Band-Steering RSSI value of 2.4GHz. The default value is 15.	column	Integer32	`.1.3.6.1.4.1.4526.100.7.14.2.1.1.27`
bandSteeringRssi50GHz This attribute shall indicate the Band-Steering RSSI value of 5GHz. The default value is 15.	column	Integer32	`.1.3.6.1.4.1.4526.100.7.14.2.1.1.28`
radioStatus This attribute shall indicate the status of radio. The default value is enable(1).	column	Enumeration	`.1.3.6.1.4.1.4526.100.7.14.2.1.1.3`
loadBalanceStatus This attribute shall indicate the status of Load Balancing Mode. The default value is disable(0).	column	Enumeration	`.1.3.6.1.4.1.4526.100.7.14.2.1.1.30`
loadUtilPercent This attribute shall indicate the Load Utilizations of new Associations. The default value is 99.	column	Integer32	`.1.3.6.1.4.1.4526.100.7.14.2.1.1.31`
frameBurst This attribute shall indicate the status of Frame Burst. The default value is disable(0).	column	Enumeration	`.1.3.6.1.4.1.4526.100.7.14.2.1.1.32`
rateLimit This attribute shall indicate the Rate Limit. The default value is 50.	column	Integer32	`.1.3.6.1.4.1.4526.100.7.14.2.1.1.33`
qamStatus This attribute shall indicate the status of 802.11n QAM. The default value is disable(0).	column	Enumeration	`.1.3.6.1.4.1.4526.100.7.14.2.1.1.34`
dfsStatus This attribute shall indicate the Rate Limit.	column	Enumeration	`.1.3.6.1.4.1.4526.100.7.14.2.1.1.35`
channel This attribute shall indicate the channel number to be used. The default value is auto(0).	column	Enumeration	`.1.3.6.1.4.1.4526.100.7.14.2.1.1.4`
dataRate This attribute shall indicate the transmit rate applicable to 802.11b, 802.11bg and 802.11a modes. When the operateMode is: dot11b(0) - can set to 0:best, 2:1Mb/s,…	column	Enumeration	`.1.3.6.1.4.1.4526.100.7.14.2.1.1.5`
wmmSupport This field indicates the status of WMM(Wireless Multimedia) suport. The default value is enable(1).	column	Enumeration	`.1.3.6.1.4.1.4526.100.7.14.2.1.1.6`
beaconInterval This attribute shall indicate the Beacon Interval. The default value is 100.	column	1024 microsecond Integer32	`.1.3.6.1.4.1.4526.100.7.14.2.1.1.7`
rtsThreshold This attribute shall indicate the RTS threshold. The default value is 2347.	column	Integer32	`.1.3.6.1.4.1.4526.100.7.14.2.1.1.8`
fragLength This attribute shall indicate the fragmentation threshold. The default value is 2346.	column	Integer32	`.1.3.6.1.4.1.4526.100.7.14.2.1.1.9`

Indexes